Syntec 60CA Manuale utente
60CA/60CB Simple-Type Wood Cutting Machine
Operation Manual
匯出日期：2022-01-05
修改日期：2019-05-31
机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
Hardware– 3
1 Hardware
60CA ( Pulse train controller )
60CB ( Serial-bus controller )
机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
Software Spec.– 4
•
•
•
•
2 Software Spec.
Item Content
Axes( Standard / Option ) 4 / 4
Spindle Number 6
Axes Group Number 4
Workpiece Coordinate Number 32
BPT 600
Software Version 10.116.54x, 10.118.12x, 10.118.x
Communication Protocol Pulse: 60CA
M3/EtherCAT: 60CB
Option HPCC : No
RTCP : No
ROT : No
AutoLabeling Function : 60CB
机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
Software Spec.– 5
•
•
•
•
•
•
Item Content
Software Function Limit These G-code are not supported for 60CA/60CB
G1084: // fasttapping G code
G5: // HPCC mode
G5001: // path smooth mode
G5005: // disable learning control
G5006: // learning start
G5007: // enable parameter learning control
G6: // Parabolic Interpolation
G6002: // nurbs G code
G7001: // G07.1(G7001) cylinder programming
G22: // stored stroke check function on
G23: // stored stroke check function off
G33: // Constant Thread Cutting
G34: // Variable Thread Cutting
G41: // Cutter Compensation Left
G42: // Cutter Compensation Right
G45: // tool offset
G46: // tool offset
G47: // tool offset
G48: // tool offset
G50: // scaling cancel
G51: // scaling
G52: // local coordinate setting
G61: // exact stop mode
G62: // cutting mode
G62002: // S-Curve mode
G63002: // EDM mode
G74: // left-hand tapping
G76: // fine boring cycle
G81001: // chopping start
G84: // tapping cycle
G87: // accurate boring cycle
G88: // boring cycle
G89: // boring cycle with dwelling at bottom
G93: // 1 / time(min), inverse time feed
G96: // Constant Surface Speed
G97: // Revolution per minute
G900081: // fast drilling
Standard Support T-code and T0000 from T0~T16
WorkingList
Plugin Enable ( Option-4 )
Pr4070 ( Default Feedrate )
SRI setting screen for FC-IO
机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
Manual Objective Machine– 6
3 Manual Objective Machine
This Operation Manual is suitable for Syntec FC-60CA and FC-60CB controller.
机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
Fenu and System Introduction– 7
•
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
l.
m.
n.
o.
p.
q.
r.
4 Fenu and System Introduction
4.1 Main Screen
Screen component description
Mode Select
HandWheel Simulation
Single Block Execution
Feedrate Adjustment
Data Input
Current Workpiece Coordinate
Current Processing file and process line
Hint
Date
Time
Log in/out status
Rest
Hand frame panel
Controller Status
Mode
Alarm
Fenu Selection
Process Simulation Previes
机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
Fenu and System Introduction– 8
s.
t.
u.
G-Code status and Coordinate
Workinglist
Processing Record and Cycle start / Feed hold / Resret
4.2 Function key Tree
4.3 Start Screen
机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
Fenu and System Introduction– 9
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Component Those component is permently display on screen
no matter how screen change
1 Mode Selection AUTO，Change to Auto Mode
MDI，Change to MDI Mode，and screen will
change to F4 Monitor with MDI input popup
JOG，Change to JOG Mode
INJOG，Change to INJOG Mode
MPG，Change to MPG Mode
HOME，Change to HOME Mode
2 Handwheel Simulation Press the button and the box one the upper left
be green, simulation mode enable
Press again the green box disappear, simulation
mode disable.
3 Single Block Execute Press the button and the box one the upper left
be green, single block mode enable
Press again the green box disappear, single
block mode disable.
4 Reset Action trigger the software be reset, no PLC
interface will be triggered.
5 Hand Frame Panel Press the button, change screen to hand mode
frame.
This panel is provided to Syntec Technician
to customize according to customer's
demand
Axes jog，Peripheral devices, or other
additional function.
6 Feedrate Adjustment G00 rate adjust，0%，25%，50%，100%
G01 rate adjust，0%, 10%, 20%,......150%
Spindle rotation rate adjust ，0%, 10%,
20%,......120%
机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
Fenu and System Introduction– 10
•
•
•
•
•
•
7 Data Date
Log in User
Workpiece Coordinate，G54, G55...
Current Processing File
Current Processing Line
4.4 Operator Panel (MainFenu: F1)
4.4.1 Operator Panel-F1: Process Frame
Devide this browser into different part, and function of each part is as below:
Part Item
1 WorkingList
2 Process Path Simulation
3 Coordinate
4 G-code State
5 Process Information
6 Cycle Start/Feedhold/Reset
Questo manuale è adatto per i seguenti modelli
1
Indice
