11
D703
WARNINGS
Important information:
ATTENTION: Capacitors C5, C6 and C7 located over the fuse “F1A” may be live even after
the panel has been disconnected from the mains supply. Short the 2 terminals of each
with a screwdriver before touching them.
-
-
-
-
Whoever ignores such standards shall be held responsible for any damage caused by
the system!
Installation
To connect the power supply of control board in 400 V, use at least a 2.5 mm² cable,
max. 40 m long.
-
The product must be properly earthed and the safety regulations in force in the
country of installation must be observed.
ENGLISH
