4m1000™ Operating Manual Addendum, 392813, en, V1.1
NAT Admin Software
NAT Admin
Software
The NAT Admin software allows you to configure the m1000™ with information to
meet your site’s specific requirements.
WARNING
The Abbott 1 ml Protocol v1.0 cannot be edited.
The use of the Abbott sample preparation kit and the provided Generic 1 ml
Protocol will allow an operator successful RNA separation. The Generic 1 ml
Protocol processes all specimens and controls as samples. Because the NAT
software does not check dependencies of process steps, instrument damage
and/or poor specimen yield and purity may result from any protocol or process
step change. It is strongly recommended that users contact Abbott Laboratories
for assistance with any protocol or process step change. Technical Support may
be limited for any changes to the Generic 1 ml Protocol not recommended by
Abbott Laboratories. The user has sole responsibility to verify and/or validate any
user-defined protocols.
WARNING
Automatically moving parts.
Injuries (crushing, piercing) possible, if the safety panels are not in place.
Before starting the m1000™, make sure that the safety door is closed.
Never operate the instrument without panels on and door closed.
WARNING
Potentially infectious
Instrument parts may be contaminated with potentially infectious materials.
Follow basic biohazard precautions
Wear appropriate personal protective equipment, such as gloves, lab coats
and protective eye wear
WARNING
The operator may be exposed to hazardous chemicals when handling sample
preparation reagents. The exposure to hazardous chemicals is minimized by
following instructions provided in produce-specific labels and product-specific
Material Safety Data Sheets (MSDS). Wear appropriate personal protective
equipment, such as gloves, lab coats, and protective eye wear.
