
Fig. 1 Fig. 2
Fig. A
Fig. 3
Fig. B
Features:
1. Loading capacity: Paper loading tray holds up to 100 sheets of
20 Lb. bond (75 G/M2) paper.
2. Folding speed: 60 sheets of 20 Lb. bond (75 G/M2) paper per minute.
3. Manual feed capacity: Max. 3 sheets at a time.
4. Folding styles: 4 popular folding styles.
5. LED light: Power/Overheat LED light.
6. 4 digit LED Sheet Counter Display and Speed Adjuster.
7. Power:100-240v/50-60Hz AC adapter.
surface and place the folder on top of it.
2. Insert the folding guides:
- Step 1) The long guide (1st Folding Guide) is inserted in the front
of the machine. It’s placement is indicated on the inner sides of the
front of the folder. The guide must be inserted so that the "C" shape
ends fit firmly onto the silver cylinders. (Fig. 1)
- Step 2) The smaller guide (2nd Folding Guide) is inserted in the back
of the unit. The guide must be inserted so that the "C" shape ends fit
firmly onto the silver cylinders. (Fig. 2)
Operation:
1. Auto Feed:
1) Maximum100 sheets loaded at a time (20 lb. Bond / 75 G/M2).
Automatically feeds 1 sheet at a time.
2) Line up stack of papers well, and push the papers into the Paper Loading
Tray Slot. When pushing the papers, push down the loading panel to
easily push papers into position. Then release the loading panel. (Fig. A)
3) The infrared sensor inside the auto feed slot will detect the papers (this
may take a few seconds) and pull the papers into the unit one after
another automatically.
2. Manual Feed:
1) Maximum 3 sheets at a time (20 lb. Bond / 75 G/M2).
2) Line up the paper(s) (if 2 or 3 sheets) into the manual feed slot and
release paper(s) to fall freely into the slot. ( Fig. B)
3. Open the paper loading tray and pull out its small tray.
4. Put the metal basket on the table/platform and put the unit on the
metal basket firmly. Then pull out the
metal paper catch. (Fig. 3)
5. Connect the AC adapter with the unit.
Then plug the AC adapter to the power
source and put the master control
switch in the “ON”position. The green
power LED light will illuminate and the
unit is now ready to be used.
IMPORTANT SAFETY
INSTRUCTIONS
CAUTIONS
Your safety as well as the safety of others is important
to TECHKO. In this manual as well as on the product
are very important safety instructions. PLEASE READ
ALL SAFETY INSTRUCTIONS BEFORE OPERATING.
Fig. 1 Fig. 2
Fig. A
Fig. 3
Fig. B
Features:
1. Loading capacity: Paper loading tray holds up to 100 sheets of
20 Lb. bond (75 G/M2) paper.
2. Folding speed: 60 sheets of 20 Lb. bond (75 G/M2) paper per minute.
3. Manual feed capacity: Max. 3 sheets at a time.
4. Folding styles: 4 popular folding styles.
5. LED light: Power/Overheat LED light.
6. 4 digit LED Sheet Counter Display and Speed Adjuster.
7. Power:100-240v/50-60Hz AC adapter.
surface and place the folder on top of it.
2. Insert the folding guides:
- Step 1) The long guide (1st Folding Guide) is inserted in the front
of the machine. It’s placement is indicated on the inner sides of the
front of the folder. The guide must be inserted so that the "C" shape
ends fit firmly onto the silver cylinders. (Fig. 1)
- Step 2) The smaller guide (2nd Folding Guide) is inserted in the back
of the unit. The guide must be inserted so that the "C" shape ends fit
firmly onto the silver cylinders. (Fig. 2)
Operation:
1. Auto Feed:
1) Maximum100 sheets loaded at a time (20 lb. Bond / 75 G/M2).
Automatically feeds 1 sheet at a time.
2) Line up stack of papers well, and push the papers into the Paper Loading
Tray Slot. When pushing the papers, push down the loading panel to
easily push papers into position. Then release the loading panel. (Fig. A)
3) The infrared sensor inside the auto feed slot will detect the papers (this
may take a few seconds) and pull the papers into the unit one after
another automatically.
2. Manual Feed:
1) Maximum 3 sheets at a time (20 lb. Bond / 75 G/M2).
2) Line up the paper(s) (if 2 or 3 sheets) into the manual feed slot and
release paper(s) to fall freely into the slot. ( Fig. B)
3. Open the paper loading tray and pull out its small tray.
4. Put the metal basket on the table/platform and put the unit on the
metal basket firmly. Then pull out the
metal paper catch. (Fig. 3)
5. Connect the AC adapter with the unit.
Then plug the AC adapter to the power
source and put the master control
switch in the “ON”position. The green
power LED light will illuminate and the
unit is now ready to be used.
IMPORTANT SAFETY
INSTRUCTIONS
CAUTIONS
Your safety as well as the safety of others is important
to TECHKO. In this manual as well as on the product
are very important safety instructions. PLEASE READ
ALL SAFETY INSTRUCTIONS BEFORE OPERATING.
Do not use solvents, cleaning degreasers,
or any chemicals to clean the letter folding
machine.
Product is not intended for use by children.
(product is not a toy) Keep children and pets
away from letter folding machine.
Avoid touching the paper feeding slot
with hands. Never insert hands or fingers
into the paper feeding slot.
Avoid hair touching the paper feeding
slot . Keep hair/face away from the
paper feeding slot.
Avoid clothing touching the paper feeding
slot. Keep personal and loose objects
(jewelry, ties, etc.) away from paper
feeding slot.
NO HAIR
Keep aerosol products away from letter
folding machine. Do not use flammable,
petroleum-based or aerosol cleaners on
or near this product. Some agents may
combust causing serious injury.
NO TIE
Fig. 1 Fig. 2
Fig. A
Fig. 3
Fig. B
Features:
1. Loading capacity: Paper loading tray holds up to 100 sheets of
20 Lb. bond (75 G/M2) paper.
2. Folding speed: 60 sheets of 20 Lb. bond (75 G/M2) paper per minute.
3. Manual feed capacity: Max. 3 sheets at a time.
4. Folding styles: 4 popular folding styles.
5. LED light: Power/Overheat LED light.
6. 4 digit LED Sheet Counter Display and Speed Adjuster.
7. Power:100-240v/50-60Hz AC adapter.
surface and place the folder on top of it.
2. Insert the folding guides:
- Step 1) The long guide (1st Folding Guide) is inserted in the front
of the machine. It’s placement is indicated on the inner sides of the
front of the folder. The guide must be inserted so that the "C" shape
ends fit firmly onto the silver cylinders. (Fig. 1)
- Step 2) The smaller guide (2nd Folding Guide) is inserted in the back
of the unit. The guide must be inserted so that the "C" shape ends fit
firmly onto the silver cylinders. (Fig. 2)
Operation:
1. Auto Feed:
1) Maximum100 sheets loaded at a time (20 lb. Bond / 75 G/M2).
Automatically feeds 1 sheet at a time.
2) Line up stack of papers well, and push the papers into the Paper Loading
Tray Slot. When pushing the papers, push down the loading panel to
easily push papers into position. Then release the loading panel. (Fig. A)
3) The infrared sensor inside the auto feed slot will detect the papers (this
may take a few seconds) and pull the papers into the unit one after
another automatically.
2. Manual Feed:
1) Maximum 3 sheets at a time (20 lb. Bond / 75 G/M2).
2) Line up the paper(s) (if 2 or 3 sheets) into the manual feed slot and
release paper(s) to fall freely into the slot. ( Fig. B)
3. Open the paper loading tray and pull out its small tray.
4. Put the metal basket on the table/platform and put the unit on the
metal basket firmly. Then pull out the
metal paper catch. (Fig. 3)
5. Connect the AC adapter with the unit.
Then plug the AC adapter to the power
source and put the master control
switch in the “ON”position. The green
power LED light will illuminate and the
unit is now ready to be used.
IMPORTANT SAFETY
INSTRUCTIONS
CAUTIONS
Your safety as well as the safety of others is important
to TECHKO. In this manual as well as on the product
are very important safety instructions. PLEASE READ
ALL SAFETY INSTRUCTIONS BEFORE OPERATING.
Do not use solvents, cleaning degreasers,
or any chemicals to clean the letter folding
machine.
Product is not intended for use by children.
(product is not a toy) Keep children and pets
away from letter folding machine.
Avoid touching the paper feeding slot
with hands. Never insert hands or fingers
into the paper feeding slot.
Avoid hair touching the paper feeding
slot . Keep hair/face away from the
paper feeding slot.
Avoid clothing touching the paper feeding
slot. Keep personal and loose objects
(jewelry, ties, etc.) away from paper
feeding slot.
NO HAIR
Keep aerosol products away from letter
folding machine. Do not use flammable,
petroleum-based or aerosol cleaners on
or near this product. Some agents may
combust causing serious injury.
NO TIE
NO AEROSOL
NO CHILD
MAX. 3 SHEETS
Operate this letter folding machine with
an 8-15 minutes on, and a 20-30 minutes
off cycle.
In order to prevent accidents, always
unplug the unit and make sure the Master
Control Switch is in the OFF position while
not in use.
Do not operate the unit with a damaged
power supply cord.
Don’t overload manual feed paper folder :
Load a maximum of 3 sheets at a time.
1. Your safety as well as the safety of others is important to TECHKO.
In this manual as well as on the product are important safety
instructions. Please read and retain these instructions.
2. Read all instructions before use. Save these instructions for later use.
3. Follow all warnings and instructions marked on the product.
4. Unplug this product from the wall outlet before cleaning. If needed, the
housing can be cleaned with a cloth, dampened with a mild soap and
water solution.
5. Folder should never be placed near or over a radiator, heat register or
water.
6. Do not rest anything on the power cord. Do not place machine where
people may walk on the cord.
7. If an extension cord is used, make sure that the total ampere ratings of
the products plugged into the extension cord do not exceed the extension
cord’s ampere rating and/or does not exceed 15 amperes.
8. Do not alter the unit or power cord in any way. Do not operate the unit if
it or the power cord appears damaged in any way.
9. Do not service this product yourself. Opening/removing covers may
expose you to dangerous voltage points or other risks, and will void
manufacturer's warranty. Unplug product from outlet and refer servicing
to qualified service personnel.
10. Keep out of reach of children and pets.
11. This folder should be operated only with an operator in attendance.
12. BE SURE THE ON/OFF MASTER CONTROL SWITCH (AT THE BACK
OF THE UNIT) IS IN THE "OFF" POSITION BEFORE PLUGGING IN
THE FOLDER.
Safety Instructions
Speed Adjuster
Jamming Reverse
Hole
Jamming Handle
Small Tray
Paper Loading
Tray
Knobs
Jamming Release Cover
Metal Basket
Metal Paper Catch
2nd Folding Guide
3
Overheat
S
E
E
T
R
Power
Manual Feed
Slot
4-digit LED Sheet
Counter Display
1st Folding Guide
Panel - 1
ON/OFF Master
Control Switch
2nd Folding Guide
Reset Switch
Loading Panel
Installation:
1. Carefully unpack the machine and inspect all contents for any possible
damage due to shipping. Place the metal basket on a flat, level work
MODEL:LF293
3
Overheat
E
S
E
T
R
Power
MODEL:LF293