Teknor Industrial Computers TEK993 Manuale del prodotto

TEK933 (PCI-933)

PENTIUM PROCESSOR

PCI-ISA SINGLE BOARD COMPUTER

TECHNICAL REFERENCE MANUAL

VERSION 2.2, JUNE 1997

TEKNOR INDUSTRIAL COMPUTERS INC.

616 Cure Boivin

Boisbriand, Quebec

J7G 2A7 CANADA

NOTE:

This manual is for reference purposes only.

Reproduction in whole or in part is authorized

provided TEKNOR INDUSTRAL COMPUTERS

INC. is cited as the original source.

ref: M933S_2-2

Foreword iii

FOREWORD

The information in this document is provided for reference purposes only. TEKNOR

does not assume any liability for application of the information or use of the products

described herein.

This document may contain or reference information and products protected by the

copyrights or patents of others and does not convey any license under the patent right

of TEKNOR, nor the rights of others.

Printed in Canada.

2A7.

Table of Contents v

TABLE OF CONTENTS

Foreword iii

List of Diagrams xi

List of Tables xiii

READ ME FIRST 1

INTRODUCTION 1

PART ONE

QUICK INSTALLATION

1INSTALLING SYSTEM MEMORY 1-1

1.01 Static Electricity Precautions 1-1

1.02 Location of SIMM Sockets 1-2

1.03 SIMM Configuration 1-3

1.04 SIMM Installation 1-6

2JUMPER LOCATIONS & CONFIGURATION 2-1

2.01 Jumper Locations 2-1

2.02 Jumper Settings 2-5

3INSTALLING TEK933 IN PASSIVE BACKPLANE 3-1

4CONNECTOR LOCATIONS & PIN-OUTS 4-1

4.01 Location of Connectors on the Board 4-1

4.02 Connector Pin-Outs 4-5

5SOFTWARE SETUPS 5-1

5.01 Accessing AMIBIOS Setup Program 5-1

5.02 Accessing VIP-UP Program 5-2

Table of Contents vi

PART TWO

HARDWARE REFERENCE

6SYSTEM 6-1

6.01 Location of System Components 6-1

6.02 Microprocessor 6-8

6.03 Fan Connector 6-10

6.04 PCI/ISA System Controller 6-11

6.05 Cache 6-16

6.06 System Memory (DRAM) 6-17

6.07 BIOS (Flash EPROM & EPROM) 6-18

6.08 Battery 6-19

6.09 Supervisor Utilities 6-20

6.10 Real Time Clock -

AT Keyboard & PS/2 Mouse Controller 6-21

6.11 Multi-Function Connector

(Keyboard, Speaker, Reset, LED) 6-22

6.12 PS/2 Mouse Connector 6-24

7PCI-ISA BUS 7-1

7.01 Location of PCI-ISA Bus Connector 7-1

7.02 PCI-ISA Connector Pin-Outs 7-2

7.03 PCI-ISA Connector Description 7-6

8SYSTEM I/O CONTROLLER 8-1

8.01 Location of System I/O Controller 8-1

8.02 System I/O Controller Features 8-2

9IDE & FLOPPY 9-1

9.01 Installing IDE Devices 9-1

9.02 Installing Floppy Devices 9-6

10 SERIAL & PARALLEL PORTS 10-1

10.01 Serial Ports 10-1

10.02 Parallel Port 10-8

11 SCSI 11-1

11.01 Installing SCSI Devices 11-1

Table of Contents vii

12 ETHERNET 12-1

12.01 Ethernet Features 12-1

12.02 Setting Up Ethernet 12-1

12.03 Ethernet Connectors 12-2

13 VIDEO 13-1

13.01 Location of Video Components 13-1

13.02 Flat Panel / CRT VGA Controller 13-3

13.03 Connecting CRT Video Display 13-4

13.04 Connecting Flat Panel Video Display 13-5

13.05 Video Feature Connector (J11) 13-7

14 POWER MANAGEMENT 14-1

14.01 Power Management Modes 14-1

14.02 Reset Circuit 14-2

14.03 Power Fail Detection Circuit 14-3

14.04 Watchdog Timer 14-4

Table of Contents viii

PART THREE

SOFTWARE REFERENCE

15 AMIBIOS SETUP 15-1

15.01 Accessing AMIBIOS Setup Program 15-1

15.02 AMIBIOS Setup Main Menu 15-2

15.03 Making Selections, Saving Configurations

& Exiting AMIBIOS Setup 15-3

15.04 Setup Window 15-6

15.05 Utility Window 15-24

15.06 Security Window 15-25

15.07 Default Window 15-26

16 VIP-UP SETUP 16-1

16.01 Accessing VIP-UP Setup Program 16-1

16.02 VIP-UP Screen 16-2

17 UPDATING BIOS WITH UBIOS 17-1

17.01 UBIOS - Interactive Mode 17-2

17.02 UBIOS - Batch Mode 17-7

18 VT100 MODE 18-1

18.01 VT100 Requirements 18-1

18.02 VT100 Setup & Configuration 18-2

18.03 Running Without a Terminal 18-4

Table of Contents ix

APPENDICES

ATEK933 SPECIFICATIONS A-1

A.01 Board Specifications A-1

A.02 MTBF A-2

A.03 Meeting Industry Standards A-9

BMEMORY & I/O MAPS B-1

CTEK933 BOARD DIAGRAMS C-1

DRECOMMENDED DEVICES & MATING CONNECTORS D-1

EPOST CODES & ERROR CODES E-1

E.01 Post Codes E-1

E.02 Word Check-Points E-7

E.03 Beep Error Codes E-8

GETTING HELP 1

List of Diagrams xi

LIST OF DIAGRAMS

1-1 SIMM Sockets Location 1-2

2-1 Jumper Locations With Default Settings 2-3

4-1 Connector Locations 4-3

6-1 System Components Location (Bottom of Board) 6-3

6-2 System Components Location (Top of Board) 6-5

7-1 PCI-ISA Bus Connector Location 7-1

8-1 System I/O Controller Location 8-1

9-1 IDE Connectors Location 9-2

9-2 Floppy Connector Location 9-7

9-3 Floppy Disk Cable 9-9

10-1 Serial Ports Location 10-2

10-2 Parallel Port Location 10-9

13-1 Video Components Location (Top of Board) 13-2

13-2 Video Components Location (Bottom of Board) 13-2

18-1 VT100 Full Setup 18-3

18-2 VT100 Partial Setup 18-3

B-1 Memory Map Diagram B-1

C-1 TEK933 Assembly (Top) C-3

C-2 TEK933 Assembly (Bottom) C-5

LIST OF DIAGRAMS (Continued)

List of Diagrams xii

C-3 TEK933 Configuration C-7

C-5 TEK933 Mechanical Specifications C-9

C-7 TEK933 Block Diagram C-11

List of Tables xiii

LIST OF TABLES

1-1a TEK933 SIMM Configurations: 2MB - 24MB 1-4

1-1b TEK933 SIMM Configurations: 32MB - 128MB 1-5

2-1a Jumper Settings: W1 - W6, W14 - W17 2-6

2-1b Jumper Settings: W7-W9, W23 2-7

2-1c Jumper Settings: W13, W18 - W22 2-8

2-1d Jumper Settings: W24 - W27, J14 2-9

4-1 Fan Connector (J1) - Pin-Out 4-6

4-2 SCSI Interface Connector (J2) - Pin-Out 4-6

4-3 Hard Disk Connector #1 (J3) - Pin-Out 4-7

4-4 Floppy Disk Connector (J4) - Pin-Out 4-8

4-5 Multi-Function Connector - Keyboard, Speaker,

Reset, LED (J5) - Pin-Out 4-9

4-6 Serial Port 1 (J6) - RS232 - Pin-Out 4-9

4-7a Serial Port 2 (J7) - RS232 - Pin-Out 4-10

4-7b Serial Port 2 (J7) - RS485/RS422 - Pin-Out 4-10

4-8 Hard Disk Connector #2 (J8) - Pin-Out 4-11

4-9 Flat Panel Connector (J9) - Pin-Out 4-12

4-10a Parallel Port Connector (J10) -Standard Mode - Pin-Out 4-13

4-10b Parallel Port Connector (J10) - EPP Mode - Pin-Out 4-14

4-10c Parallel Port Connector (J10) - ECP Mode - Pin-Out 4-15

LIST OF TABLES (Continued)

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Teknor Industrial Computers Computer a scheda singola

Teknor Industrial Computers

Teknor Industrial Computers VIPer808 Manuale del prodotto

Teknor Industrial Computers

Teknor Industrial Computers TEK-AT4L Plus Manuale del prodotto

Teknor Industrial Computers

Teknor Industrial Computers TEK-CPCI 1003 Manuale del prodotto

Manuali Computer a scheda singola popolari di altre marche

WIN Enterprises

WIN Enterprises PL-80910 Manuale utente

AXIOMTEK

AXIOMTEK SBC81206 Series Manuale utente

Embest

Embest SOM-PH8800 Manuale utente

SeaLevel

SeaLevel SBC-R9 Manuale utente

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manuale utente

WinSystems

WinSystems PPM-LX800-G Manuale utente

GIGAIPC

GIGAIPC QBiX-PPC Series Manuale utente

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manuale utente

Commell

Commell FS-978 Manuale utente

GIGAIPC

GIGAIPC QBiP-8665A/ Manuale utente

VersaLogic

VersaLogic Python EBX-11 Manuale utente

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manuale utente

CompuLab

CompuLab SB-A510 Manuale utente

Boser

Boser HS-7321 Manuale utente

Premier Farnell

Premier Farnell Embest SBC8530 Manuale utente

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manuale utente

Aaeon

Aaeon UP Manuale utente

Portwell

Portwell WUX Series Manuale utente