Teldat APR2044ax Manuale utente

APR2044ax

Installation Manual

Teldat S.A. Manual

APR2044ax 1

Legal Notice

Warranty

This publication is subject to change.

Teldat S.A. offers no warranty whatsoever for information contained in this manual. Teldat S.A. is not liable for any

direct, indirect, collateral, consequential or any other damage connected to the delivery, supply or use of this manual.

All rights to the data included, in particular the right to copy and propagate, are reserved by Teldat S.A..

Manual Teldat S.A.

2APR2044ax

Table of Contents

Chapter1 Introduction..................................... 1

Chapter2 Installation...................................... 2

2.1 Settingupandconnecting................................ 2

2.2 Connectors ...................................... 4

2.3 LEDs......................................... 5

2.4 Generalproductfeatures ................................ 6

2.4.1 FunctionalInterfaces.................................. 6

2.4.2 ElectricalFeatures................................... 7

2.4.3 MechanicalFeatures.................................. 7

2.4.4 EnvironmentalFeatures................................. 8

2.5 Reset......................................... 8

2.6 Outlinedrawing..................................... 8

2.7 Anti-corrosion measures to protect the metal parts of the device during transportation, storing or at its

finallocation...................................... 9

2.8 Cleaning....................................... 10

2.9 Pinassignments................................... 10

2.9.1 Ethernetinterface .................................. 10

2.9.2 Powersupplysocket................................. 11

2.10 Frequenciesandchannels............................... 11

2.11 Supportinformation.................................. 11

Chapter3 Compliance.................................... 13

3.1 Manufacturerinformation ............................... 13

3.2 WEEEinformation.................................. 13

3.3 REACH....................................... 14

3.4 EC declaration of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3.5 Nationalrestrictions.................................. 14

3.6 Operatingfrequency ................................. 15

3.7 Labeling....................................... 15

Chapter4 Basicconfiguration................................ 16

4.1 Pre-settings..................................... 16

4.1.1 Preconfigureddata.................................. 16

4.1.2 Softwareupdate................................... 16

Teldat S.A. Table of Contents

APR2044ax i

4.2 Systemrequirements................................. 17

4.3 Preparation..................................... 17

4.3.1 Gatheringdata.................................... 17

4.3.2 ConfiguringaPC................................... 18

4.4 IPconfiguration.................................... 18

4.5 Modifysystempassword................................ 19

4.6 SoftwareUpdate................................... 20

Chapter5 SystemManagement............................... 21

5.1 Status........................................ 21

5.2 GlobalSettings.................................... 22

5.2.1 System....................................... 22

5.2.2 Passwords...................................... 24

5.2.3 DateandTime.................................... 24

5.3 RemoteAuthentication ................................ 26

5.3.1 Radius ....................................... 26

Chapter6 LAN........................................ 30

6.1 VLAN/BridgeGroups................................. 30

6.1.1 PortConfiguration .................................. 30

6.2 IPConfiguration................................... 31

6.2.1 Interfaces...................................... 31

Chapter7 WirelessLAN................................... 34

7.1 Globalsettings.................................... 34

7.2 WLAN<x>...................................... 34

7.2.1 RadioSettings.................................... 34

7.2.2 WirelessNetworks(VSS)............................... 38

Chapter8 Bluetooth..................................... 47

8.1 Generalsettings................................... 47

Chapter9 Networking.................................... 48

9.1 Routes....................................... 48

9.1.1 IPv4 Route Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Chapter10 LocalServices .................................. 50

10.1 DNS ........................................ 50

Table of Contents Teldat S.A.

ii APR2044ax

10.1.1 DNSServers..................................... 50

10.1.2 StaticHosts..................................... 50

Chapter11 Maintenance ................................... 52

11.1 Diagnostics..................................... 52

11.1.1 PingTest...................................... 52

11.1.2 DNSTest...................................... 52

11.1.3 TracerouteTest ................................... 53

11.2 Software&Configuration ............................... 53

11.2.1 Options....................................... 53

11.3 Reboot....................................... 55

11.3.1 SystemReboot.................................... 55

11.4 FactoryReset.................................... 56

Chapter12 ExternalReporting................................ 57

12.1 SIA......................................... 57

12.1.1 SIA......................................... 57

Chapter13 Monitoring..................................... 58

13.1 Interfaces...................................... 58

13.1.1 Statistics ...................................... 58

13.1.2 NetworkStatus.................................... 59

13.2 WLAN........................................ 60

13.2.1 VSS ........................................ 60

13.2.2 NeighborAPs.................................... 61

Index ....................................... 63

Teldat S.A. Table of Contents

APR2044ax iii

Chapter 1 Introduction

The APR2044ax is Teldat’s new WiFi Access Point for railway applications. It features two state-of-the-art WiFi 6

modules that can provide connectivity to a high number of passengers. It has been especially designed to meet the

more demanding railway regulations (such as EN 50155). The APR2044ax seamlessly integrates with HotSpot and

WebFilter applications, creating a full solution for on-train Internet connectivity. Thanks to its two 2.5GbE ports, it can

be mounted on a daisy chain configuration (thus reducing the need for additional switches).

Safety notices

The safety precautions brochure, supplied together with your device, tells you all you need to know when using your

access point.

Installation

The Installation on page 2 chapter shows you how to connect the device.

Configuration

The Basic configuration on page 16 chapter describes the preliminary actions that need to be carried out for configur-

ation purposes. Later on, you will find instructions on how to access your device from a Windows PC (using a current

web browser) and how to select basic settings.

Password

If you already know how to configure Teldat devices and you want to get started right away, all you really need to

know is the preset user name and password.

User Name:admin

Password:admin

Note

Remember to change the password after logging in for the first time. All Teldat devices are supplied

with the same one, which means they are not protected against unauthorized access until you change

said password. Chapter Modify system password on page 19 shows how to change it.

Teldat S.A. 1 Introduction

APR2044ax 1

Chapter 2 Installation

Note

Please read the safety notices carefully before installing and starting up your device. These are sup-

plied together with the device.

2.1 Setting up and connecting

Note

The device can be fitted with various antenna systems. External, screw-on standard antennas can be

used (optional).

Fig. 1: APR2044ax - Connection options

When setting up and connecting the device, carry out the following steps in order:

(1) Antennas

Connect the antenna connectors to the antennas to be used with the device.

(2) Installation

Thanks to the brackets in the housing, the access points can be mounted on the wall or ceiling.

Wall-/Ceiling mounting

To install the device on the wall/ceiling, the mounting brackets may be readily attached to the housing. They

are screwed onto the wall/ceiling with six screws.

Warning

Before drilling, make sure that there are no building installations nearby. If gas, electricity, water or

waste water lines are damaged, you may endanger your life or damage property.

• Screw the mount to the wall with the 6 screws.

• Make sure the device connections are accessible.

2 Installation Teldat S.A.

2APR2044ax

Fig. 2: Wall/Ceiling mounting

(3) Protective Earth connection

Protective Earth: If an error occurs, a terminal can be connected to an external protective conductor to avoid

electric shocks.

A protective earth cable with a minimum cross-section of 2.5mm2and a copper-tinned ring type crimp cable

lug (e.g., DIN 46235 or DIN 46234) must be fastened to the rear of the housing (using the M4 bolt close to the

IEC 417 Protective Earth Symbol). After installation, check for low ohmic connection between the housing and

the protective earth connection.

Warning

This equipment must be grounded. Never unplug the ground conductor or operate the equipment

in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspec-

tion authority or an electrician if you are uncertain that suitable grounding is available. When in-

stalling or replacing the unit, the ground connection must always be made first and disconnected

last.

Teldat S.A. 2 Installation

APR2044ax 3

Fig. 3: Rear view, Protective Earth connection

(4) LAN

For the standard configuration of your device via Ethernet, connect port LAN1 or LAN2 to your LAN using an

Ethernet cable. The device automatically detects whether it is connected to a switch or directly to a PC.

Use just one of the ports (LAN1 or LAN2). The second port is used to cascade a number of devices. If you

use both Ethernet connections on the same switch, loops may form.

(5) Power connection

The APR2044ax is powered from 24V to 110 V nominal DC power source.

Note

Please verify the device power input is valid for your power feeding.

There is no on/off switch or fuse. A label on the rear of the equipment contains the power supply information.

Connect the device to a mains socket.

Use a power cord that matches the type of connector on your device and insert it in the appropriate socket.

Now plug the power cord into a power socket. The power LED signals that your device is correctly connected

to the power supply.

Warning

This equipment requires an external overcurrent protection device. To comply with safety regula-

tions, either a 5.0 A time-lag fuse or a previously approved 1-amp thermo-magnetic circuit breaker

(ABB-S281-UC-K-1 or equivalent) must be installed in the power line.

Observe the correct polarity of the DC connection, wrong polarity may destroy the external line fuse.

The device is now ready for configuration.

2.2 Connectors

All the connections are located on the underside of the device.

Fig. 4: Connectors

Front side of APR2044ax

Name Function Note

Power Power input 24 V d.c - 110 V d.c. M12 male, 4 pins

2 Installation Teldat S.A.

4APR2044ax

Name Function Note

Refer to section Power supply socket on page 11

for more information on Power connection and,

Electrical Features on page 7 for power specifica-

tions applicable to the device.

LAN-1 100/1000/2.5G Base-T Ethernet M12, 8 pins, X#coded (PoE+)

LAN-2 100/1000/2.5G Base-T Ethernet M12, 8 pins, X#coded

Reset Reset Button Performs restart and factory reset.

For further information on how the reset button

works, please see Reset on page 8

Bluetooth Bluetooth antenna 2.4 GHz band, QMA connector

A Wi-Fi antenna, CH3 2.4 & 5 GHz band, QMA connector

B Wi-Fi antenna, CH2 2.4 & 5 GHz band, QMA connector

C Wi-Fi antenna, CH1 2.4 & 5 GHz band, QMA connector

D Wi-Fi antenna, CH0 2.4 & 5 GHz band, QMA connector

2.3 LEDs

The LEDs show the radio status, radio activity and LED states of your device. The LED states are made up of LED

combinations, explained in further detail in this chapter.

The LEDs on the APR2044ax device are arranged as follows:

Fig. 5: APR2044ax LEDs

In operation mode, the LEDs display the following status information:

LED status display APR2044ax

LED Colour Status Information

Status off No power supply connected. Error if other LEDs are lit.

green on (flashing) Normal operation

red on (static) Failure

red on (flashing Management communication error

LAN 1/2 off No LAN

red on (static) 100 Mbit/s active

red on (flashing) 100 Mbit/s data traffic

yellow on (static) 1000 Mbit/s active

yellow on (flashing) 1000 Mbit/s data traffic

green on (static) 2500 Mbit/s active

green on (flashing) 2500 Mbit/s data traffic

WLAN 1/2 off Radio module and/or SSIDs inactive

green on (slowly blinking) SSID active, no client is authenticated

green on (fast blinking) SSID active, one or more clients authenticated

green on (flashing) SSID active, one or more clients authenticated and data

Teldat S.A. 2 Installation

APR2044ax 5

Indice

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente