TeleEye DM338 Manuale utente

Before using the product, please read this manual carefully.

USER MANUAL

TeleEye DM338

Notice:

Signal Communications Limited reserves the right to make improvements to the product

described in this manual at any time and without prior notice.

This manual is copyrighted. All rights are reserved. This manual may not be copied, reproduced

or translated in whole or part without prior consent from Signal Communications Limited.

Tele Eye is a trademark of Signal Communications Limited and is registered in China, Hong

Kong, US and other countries.

TeleEye's products are sold under the brand name of CAMERIO in Australia, Japan, Korea, New

Zealand, Taiwan and Argentina.

CAMERIO is a trademark of Signal Communications Limited and is registered in Australia,

Japan, Korea, New Zealand, Taiwan and Argentina. All other trademarks are the property of

their respective owners

reserved.

Version 1.0

Limits of Liability and Disclaimer of Warranty

Signal Communications Limited has taken care in preparation of this manual, but makes no

expressed or implied warranty of any kind and assume no responsibility for errors or omissions.

No liability is assumed for incidental or consequential damages in connection with or arising out

of the use of the information or accessories contained herein.

Features and specifications are subject to change without prior notice.

Precautions

1Transportation

TeleEye DM338 Vandal Proof P/T Dome Camera is sophisticated product and should be

protected against extremes of pressure, temperature, vibration and humidity during

storage and transportation.

2 Do not disassemble the dome module

There is no user serviceable part or setting inside. Failure to observe this instruction could

result in damage to TeleEye DM338 and loss of warranty. Only suitably qualified and

authorized personnel may undertake repairs.

3 Installation

TeleEye DM338 is designed for ceiling mount only. Do not install it in any other

orientations. Failure to comply with this requirement will result in damage to the product.

4 Cleaning

In order to get clear image, down cover should be cleaned periodically. Be careful when

cleaning, only hold down cover edge, avoid direct touching down cover, acid matter in the

fingers will corrupt down cover plating surface. Hard material scratching down cover will

lead to vague image. Please use soft clean cloth or other substitution to clean interior and

exterior surface. Neutral detergent as well as any high-grade furniture detergent can be

used to clean down cover

5 Environment

The operation temperature of TeleEye DM338 is -10 ~50 , input power supply is DC

12V/600mA. Do not use it in circumstances where temperature, humidity or power supply

variations fall outside the range of specified values.

6 Excessive light

It is important that TeleEye DM338 is not left in a position where it is pointing directly at the

sun or other extremely bright light source. This may result in CCD damage and poor image

quality.

7 Do not install Tele Eye DM338 in the outdoor environment

℃ ℃

Contents

NOTICE..........................................................................2

PRECAUTIONS...............................................................3

CONTENTS.....................................................................4

PRODUCT OUTLINE AND FEATURES ..............................5

DESIGNATION AND FUNCTION.....................................6-9

TABLE FOR CAMERA ID............................................10-12

SPECIFICATION AND DIMENSION..................................13

CONTROLLER...............................................................14

CABLE CONNECTIONS FOR CONTROLLER...................15

FUNCTION SETUP....................................................16-19

CAMERA INSTALLATION...........................................20-21

EX) CAMERA INSTALLATION..........................................22

CABLE CONNECTION...............................................23-24

SPECIFICATION............................................................25

SETUP FOR CAMERA FUNCTIONS.................................26

PRODUCT OUTLINE AND FEATURES

2. Features

1.Product Outline

2) Fast speed ( Max. 93 degree per second)

3) 64 PRESET, Staying time in each position can be selected

4) Remote control available (by RS-485 controller)

5) Compatible with various DVRs (Protocol supplied)

6) Simple remote control available (option)

8) Impact - resistant material(Aluminum & Poly Carbornate)

Panning

(

Modern & stylish design

Thermal sensor and cooling fan built-in.

This camera can be moved by simple special controller or DVR to up and

down, left and right.

Poly CarbornateAs this dome is made of aluminum and , it can resist water,

dust and external impact easily.

DESIGNATION AND FUNCTION 1

RUBBER PAD

BASE CASE

BOLT

BASE SEAL RING

MID CASE

SEAL RING

COVER ASSEMBLY

CAMERA & P/T MODULE ASSEMBLY

AccessoryDesignation and function

M3x8 WASHER SCREW x 3

4x25 COUNT SINK SCREW x 4

WRENCH TORX T10 x 1

TERMINAL BLOCK x 1

Cable

Cable connection

Pin array

12V DV12V, 600mA input

Connected to monitor.

Connected to controller or

DVR

GND

VIDEO

GND

RS485A

RS485B

1. Termination Switch : Used for communication

ON - Apply to terminal unit when communicated with PC or remote

control in 1:1 or in multi-communication.

OFF - Apply to all the cameras except terminal unit in

multi-communication.

RS-485

DESIGNATION AND FUNCTION 2

DESIGNATION AND FUNCTION 2 Detail "A"

TE RM IN AT IO N

ON O FF

1. ID setup

- Use it when you use many cameras or if you want to use special

camera ID.

- You can set up Max. 255 units.

(Please refer to the table for camera ID setup at page11)

- Optional remote control can control upto 99pcs of camera.

DESIGNATION AND FUNCTION 3

ADDRES S SWIT CH

Detail "B"

Indice

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente