TeleEye MX873-HD Manuale utente

Quick Start Guide

TeleEye MX775-HD/MX873-HD Network Ca era

This Quick Start Guide will guide you how to install and configure the TeleEye MX775-HD MX873-HD Network Camera

for remote video monitoring.

Ca era Installation

Step 1. After mounting the camera on the wall or ceiling, connect the Ethernet cable to the LAN adapter and

the 12VDC power supply to the power cable if PoE is not available.

Step 2. Start sureSIGHT or a web browser to start a remote video

monitoring in order to adjust the camera.

[Reference] Please refer to the following

sections to understand how to start

video monitoring.

Step 3. Loosen the bolts to adjust the horizontal and vertical angle of the

camera

Step 4. Open the back cover to adjust the focus and zoom with a

screwdriver

IP Setup Utility

Step 1. After installing sureSIGHT and turning on the Network Camera, select the “Run TeleEye IP Setup

tility” from the windows start menu.

Step 2. Search the target camera by its serial number, highlight the corresponding row from the list on the left

side of the window to select it. If the camera cannot be found, click the [Refresh] button.

Step 3. Changes the network settings of the camera on the right side of the window, including IP, ports, mask,

etc. Press [Apply] button to confirm the settings.

Step 4. Enter the password to save the information when prompted.

[Note] The default password is “000000”.

Live Monitoring with Web-Browser

Step 1. Open a web browser on a PC and type in the IP address of the Network Camera.

Step 2. Select the connection type and input the password.

[Note] The default password is “000000”.

Step 3. Click the [Connect] button to connect the selected video stream. Video will then be displayed on the

browser as follow.

Live Monitoring with sureSIGHT

Step 1. After installing sureSIGHT and turning on the Network Camera,

select the “Run sureSIGHT Lite” from the windows start menu. Input the

password to log-in to the sureSIGHT.

[Note] The default password for administrator is “000000”.

Step 2. Click the [Connect] button on the left panel.

Step 3. Click the [Search all the sites] to search the target camera by

its serial number or site name.

Step 4. Select the target camera and confirm all the site information,

the sureSIGHT will then connect to the camera automatically.

[Note] the default password is “000000”.

[Reference] For detail operations, please refer to the sureSIGHT user manual.

END

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente