Telematrix 2802MWD Manuale utente

2802MWD

2 LINE -10 MEMORY

INSTALLATION

AND USER GUIDE

?Copyright TeleMatrix Inc. 2000

COMPLIANCE AND SAFETY

As specified by FCC regulation, we are required to inform you of specific governmental and

compliance regulatory requirements, safety notices, safety instructions and other informative

information. TeleMatrix, Inc. provides this information in a separate manual. We pack the

separate Compliance and Safety Manual within each outer box or product box when shipped.

Prior to reading this operation manual and prior to setting up your telephone, please refer to

the Compliance and Safety Manual.

If the Compliance and Safety Manual is not immediately available. Please obtain a free copy by

calling our Priority Care Department (phone number 1-800-462-9446) or by downloading a copy

on our Internet (web site address www.telematrixusa.com).

Features ...........................................………..……………………………………................................... 1

Controls ...........................................................................………………………………………………..2

Switch Settings .....................................….......................……………………………………………...... 4

Installation .....................................................................……………………………………………........ 5

Wall Mounting .....................................….......................……………………………………………........ 7

Programming Speed Dial Memory .................................……………………………………………....... 8

Operation ........................................................................……………………………………………..... 11

Care and Maintenance ..................................................……………………………………………....... 14

Service …………………………………………………..……………………………………….………… 15

Warranty .......................................................................……………………………………………....... 16

CONTENTS

FEATURES

?? TwoLine

?? Convenient Data Port

?? 10 Single Button Memory Locations With Secure Programming

?? Tone Dialing

?? Speaker Key

?? Conference Key

?? Mute Key

?? Handset Volume Control

?? TouchLite™ Message Waiting Retrieval

?? NEON/LED Message Waiting Switch

?? Store Key (submerged))

?? Storable Flash Function (600 mS) (submerged)

?? Storable Pause Function (3.6 seconds) (submerged)

?? HI/LOW Ringer Volume Control Switch

?? Desk or Wall Mountable

?? Fully Modular, Easy To Install

CONTROLS

LINE

ANDSE

LOWHI

LINE1

(1)

(2)

(3)

(4)

(5)

(10)

(6)

(7)

(8)

(9)

(12)

(13)

(16)

(15)

(11)

(14)

LED

24V

48V

DEFINITION OF CONTROLS

1. Handset ..........…………..………….........…... Hearing aid compatible, low profile styling.

2. Ringer Controls ………………….……………. Adjusts the volume of the ringers to HI/LOW setting.

3. Handset Clip …………………………………... Retains the handset when the phone is wall mounted.

4. Handset Jack ……………………………….… Modular receptacle where handset cord plugs into the base unit.

5. Dial Pad ………………………………….…….. Large keys used for dialing.

6. Conference Key ……………………………… Used for conference calling.

7. Speaker Key …………………………………… Used to activate speaker

8. Mute Key ……………………………………….. Used to mute speaker key and handset

9. Handset Volume Control ……………….…….. Controls the loudness of the receiver volume when pressed.

10. Message Waiting TouchLite™ Key ………….. Used to call voice mail to retrieve messages.

11. Pause Key ……………………………………... (Submerged Key) Used to program a 3.6 second pause in memory.

12. Flash Key …………………………………….… (Submerged Key) Used to provide a 600 mS line break to access PBX/Centrex.

13. Feature Access Keys …………………………. 10 Programmable memory locations for frequently dialed phone numbers and access codes.

14. Data Port ……………………………………….. Used to connect a computer modem, fax machine, or answering device.

15. Message Waiting Selector Switch ………….. Select optional 90VDC or Low voltage LED Message Waiting.

16. Store Key ………………………………………. (Submerged Key) Used to program information for speed dialing.

SWITCH SETTINGS

There are installer selectable switches located on the bottom base underneath a protective plastic overlay. These switches are

hidden behind a plastic cover for security. To locate, remove the plastic covers using a sharp pointer or paper clip as shown.

Message Waiting Selector

The 2802MWD can support 90VDC neon or low-voltage LED message waiting

systems. Simply slide the switch to the desired position that is compatible with

your PBX messaging system.

Note: the phone is factory preset to the “Neon” setting.

Line Voltage Selectors

The 2802MWD is designed to operate behind PBX telephone systems rated

between 24 volts and 48 volts. There are line voltage selector switches that

must be set according to the PBX system rating that the phone will be installed.

There are two (2) switches, the first for Line 1 and the other for Line 2. Each

switch has three (3) setting options. They are: “24V/48V/OFF”. Set the

switches by simply sliding to the appropriate setting. The ”OFF” setting is used

to turn off the line if a line appearance is not wired to the telephone. (figure 6)

Note: the factory default is set to the “24V” setting.

LED

24V

NEON

48V OFF

Figure 6

Figure 5

LED

24V

NEON

48V OFF

INSTALLATION

Parts Check List

The following parts are included in this package:

1. 15’ modular telephone line cord.

2. Modular coiled handset cord.

3. Base unit

4. Handset

Caution

?? Never install telephone wiring during a lightning storm.

?? Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

?? Never touch uninstalled telephone wires or terminals unless the telephone line has been disconnected at the network interface.

?? Use caution when installing or modifying telephone lines.

(1)

(2)

(3)

(4)

Parts not included wall mount wedge. Call customer service for wall mount wedge.

Figure 3

Connecting The Handset Cord

A 10’ modular coil handset cord is provided.

To install, simply plug one end of the handset

cord into the modular jack on the handset.

The remaining end of the handset cord plugs

into the jack labeled “Handset” located on the

left side of the base unit.

(figure 3)

INSTALLATION

Connecting The Line Cord

A 15’ modular line cord is provided.

To install, simply plug one end of the line

cord into the modular jack located on the

back of the base unit. The remaining end of

the line cord plugs into the wall jack.

(figure 4)

Figure 4

JACK

LINE

WALL MOUNTING

Wall Mounting Your 2802MWD

The 2802MWDwas designed to be conveniently wall mounted.

There is no additional hardware required. Follow these easy

steps:

1. The handset retaining clip must be engaged to secure the

handset when hanging up. To engage the clip, unsnap the

clip, rotate the clip 180º and then snap the clip into place.

(figure 7)

2. Plug one end of a short line cord (not included) into the line

jack on the back of the Marquis base unit. Plug the remaining

end of the short line cord into the wall jack. Next, guide the

phone onto the studs of the wall jack. Pull down firmly until you

feel it snap into place. The unit is now wall mounted. (figure 8)

Figure 7

1. UNSNAP

2. ROTATE 180 .

3. SNAP INTO PLACE.

Figure 8

WEDGE

2.SNAP INTO PLACE.

TABS.

1.PRESS THE RELEASE

MOUNTING

Altri manuali per 2802MWD

Indice

Altri manuali Telematrix Telefono

Telematrix

Telematrix Marquis Series 3300LBY Manuale utente

Telematrix

Telematrix 1L Trimline Manuale utente

Telematrix

Telematrix MARQUIS 3100 Series Manuale utente

Telematrix

Telematrix Spectrum Plus SP100 Manuale utente

Telematrix

Telematrix Spectrum Plus SP550 Istruzioni operative

Telematrix

Telematrix Marquis 3000MWB Manuale utente

Telematrix

Telematrix SIP 9600IP Manuale utente

Telematrix

Telematrix Marquis 2802MWS Manuale utente

Telematrix

Telematrix Spectrum Plus LP550 Manuale utente

Telematrix

Telematrix DECT MWD5 Manuale utente

Telematrix

Telematrix Spectrum Plus SP200 Manuale utente

Telematrix

Telematrix Spectrum Plus SP300 Manuale utente

Telematrix

Telematrix Spectrum Plus SP550 Manuale utente

Telematrix

Telematrix Marquis 3002MWS Manuale utente

Telematrix

Telematrix Marquis 2800MWD Manuale utente

Telematrix

Telematrix Spectrum Plus SP200 Manuale di installazione

Telematrix

Telematrix Spectrum Plus LP550 Manuale utente

Telematrix

Telematrix 3300TRM Manuale utente

Telematrix

Telematrix Marquis Series 3300LBY Manuale utente

Telematrix

Telematrix Marquis 2800MWB Manuale utente

Telematrix

Telematrix Spectrum Plus SP750 Istruzioni operative

Telematrix

Telematrix Marquis 2800MW10 Manuale utente

Telematrix

Telematrix TRIMLINE Manuale utente

Telematrix

Telematrix Retro Series Manuale utente

Manuali Telefono popolari di altre marche

GE 2-9480 Manuale utente

Geemarc

Geemarc PHOTOPHONE 155 Manuale utente

D-Link

D-Link DWR-720/PW Manuale utente

Interquartz

Interquartz Gemini IQ333 Manuale utente

SSS Siedle

SSS Siedle HT 840-0 Manuale utente

Motorola

Motorola TITANIUM Manuale utente

Panasonic

Panasonic ICX Manuale utente

LG H870DS Manuale utente

Samsung

Samsung GT-I9500 Manuale utente

AT&T

AT&T Trimline 205 Manuale utente

Selta

Selta zenyth 600 Manuale utente

Doro

Doro AFTI 20 Manuale utente

UNIQCELL

UNIQCELL A1 Manuale utente

Panasonic

Panasonic KX Series Manuale utente

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manuale utente

BT Decor 425 Manuale utente

NEC

NEC SV8500 Manuale utente

Teledex

Teledex PEARL Manuale utente