Teleste CFO100 Manuale utente

User manual

Single and triple channel video only link

CFO First Mile series consist of ﬁbre optic modems which provide a high

quality and lossless video transmission for variety of CCTV applications.

CFO100 user manual, 59300292, rev003

Contents

CFO100 - Single and triple channel video only link .............................................................................................. 1

General .............................................................................................................................................................. 1

Features ............................................................................................................................................................. 1

CPT101 mini sized stand-alone video transmitter................................................................................................. 2

General .............................................................................................................................................................. 2

Video input ........................................................................................................................................................ 2

Fibre connection ................................................................................................................................................ 2

CPT101 stand-alone installation ........................................................................................................................ 3

CRT103 triple channel video transmitter................................................................................................................ 4

General .............................................................................................................................................................. 4

Frame installation ............................................................................................................................................... 4

Video connections.............................................................................................................................................. 4

Link status indicator LEDs.................................................................................................................................. 4

CRT103 stand-alone installation ........................................................................................................................ 5

Fibre connection ................................................................................................................................................ 6

CRR101/103 single and triple channel video receiver........................................................................................... 7

General .............................................................................................................................................................. 7

Frame installation ............................................................................................................................................... 7

Video connections and indicator LEDs .............................................................................................................. 7

Link status indicator LEDs.................................................................................................................................. 7

CRR101/103 stand-alone installation................................................................................................................. 8

Fibre connection ................................................................................................................................................ 9

Legal declarations .................................................................................................................................................. 10

WEEE directive........................................................................................................................................................ 10

CFO100 user manual

CPT101

Video

CPT101

Video

CPT101

Video

CRR103

Video

CRT103

CPT101

VideoVideo

multimode ﬁbres

up to 6.5 km

multimode ﬁbres

up to 6.5 km

multimode ﬁbres

up to 6.5 km

CRR101

CFO100 user manual 1

Welcome, and thank you for purchasing Teleste’s CFO products.

General

CFO100 First Mile series offers a highly cost-effective single channel

composite video transmission over one multimode bre.

High quality video image can be transmitted over distances up to

6.5 km depending on the type of multimode bre in use. A typical

application is a point-to-point transmission from a xed CCTV camera to

a monitoring centre.

CFO100 series consist of mini sized stand-alone video transmitter

followed by standard 5HP size CFO cards for triple channel video

transmitter as well as for single and triple channel receiver operation.

The CPT101 stand-alone transmitter is temperature hardened and is

capable of using both 12 VDC or 24 VAC supply voltage.

CPT101 unit is a compact size housing for special stand-alone

installations requiring minimal installation space. Also as an

optional DIN rail mounting is possible (item code CIK001).

CRT103 and CRR101/103 cards are compatible with all CFO rack

systems. Stand-alone options are available with the CMA015

module adapter and separared CPS25x series mains adapter.

As with all CFO platform products these specic models do meet

all typical EMC as well as other environmental and manufacturing

related requirements. The permitted operational temperature range

is -34...+74°C.

Note! New generation CFO100 products are based on digital

transmission and are not therefore compatible with previous

analog CFO100 series.

Features

>> Low cost video transmission

>> High performance uncompressed zero delay digital video transmission,

SNR 65 dB typical, 10 bit video sampling

>> One CVBS (PAL/NTSC) video channel

>> Transmission over on one or three multimode bre up to 6.5 km

>> Card format applicable both for rack mount and stand-alone installations

>> One and triple channel units available for both transmitter and receiver

>> Transmitter unit available in a special compact-size stand-alone design

>> Feasible for eld hardened operation

>> Mechanically compact and ruggedised

>> EMC and environmental conformance

CFO100 - Single and triple channel video only link

CFO100 First Miles series offers a 10-bit video transmission over

one mutimode be / video channel for xed camera applications.

2CFO100 user manual

CPT101 mini sized stand-alone video transmitter

General

The CPT101 is a one channel optical transmitter for uni-directional video

transmission in a multimode bre.

The current consumption is

max. 130 mA (+12V DC).

Video input

The video input impedance (BNC female) is 75 Ω. The nominal input level

is 1 Vpp.

Fibre connection

The optical connector is of the type ST. The optical output level is

typically -4 dBm. For testing purposes the CFO100 series transmitter

and receicer can be connected with a short bre patch cable.

The operating wavelenght is 1310 nm.

When installing the bre optic cable, do not exceed the minimum bending

radius when connecting cable to the system.

Note! For correct optical operation ensure that all optical

connectors are cleaned immediately before mating. Connectors

should always be cleaned using high purity alcohol (e.g. methyl or

isopropyl alcohol). Dry the surfaces using clean compressed air or

other equivalent pressurised gas. The female ST optical

connectors on the equipment should always be protected with

dustcaps when there is no bre inserted.

Optical connection meets class 1M laser safety requirements of IEC

60825-1: 2001 and US department of health services 21 CFR 1040.10

and 1040.11 (1990) when operated within the specied temperature,

power supply and duty cycle ranges.

CPT101 Optical Transmitter

1) Video input (BNC female)

2) Optical output (ST)

3) Power led

4) Power supply connector

(2-pin screw terminal)

5) Grounding

side view

CAUTION:

THESE OPTICAL UNITS USES CLASS 1M LASER DIODE.

DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL

INSTRUMENTS. APPLICABLE STANDARD

IEC60825-1: 2001

CPT101

Digi-Pixi

top view

ST Connectors.

Make sure the key is aligned in the slot

properly before tightening!

RADIATION

INVISIBLE LASER

CLASS 1M

CFO100 user manual 3

CPT101 stand-alone installation

The CPT101 units are designed for stand-alone installation. The unit

should be mounted with a help of wall bracket to a installation place.

The supply voltage can be either +12V DC or 24V AC. The supply

voltage is provided by either a surveillance camera unit, or by an external

mains adapter. The permitted supply voltage range are 10.5...14 VDC

and 16...24 VAC. In DC use the +12V DC supply voltage is supplied by

the means of a separate mains adapter with a regulated output, (e.g.

CPS251). The permitted operational temperature range is -34...+74°C.

Wall bracket dimensions.

4CFO100 user manual

CRT103 triple channel video transmitter

CAUTION:

THESE OPTICAL UNITS USES CLASS 1M LASER DIODE.

DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL

INSTRUMENTS. APPLICABLE STANDARD

IEC60825-1: 2001

General

The CRT103 is a three channel optical transmitter for uni-directional

video transmission in a multimode bre. The current consumption is

300 mA (+12 VDC).

Frame installation

The CRT103 module is to be pushed along the guide rails into

the installation frame (e.g. CSR216 or 316 series) and secured with

the two locking screws. The unit can be freely positioned in any slot in

the frame. The empty positions in the frame should be blanked off with

cover plates. The supply voltage is to be provided by a CPS384 or

CPS390 power supply unit which are installed back of frame.

Video connections

The impedance of the video inputs (BNC female) is 75 Ω. The nominal

input level is 1 Vpp.

Link status indicator LEDs

In the (uni-directional) CRT103 units the LINK STATUS led is only

monitored by the optical receiver CRR101/103. Therefore the LINK

STATUS led in CRT103 units has no real value and is always green.

CRT103 Optical Transmitter

1) Locking screw (2 pcs)

2) Video input (BNC female)

3) Optical output (ST)

4) Link status indicator led

5) Handle (with unit information)

See further information on

dedicated sections.

CRT103

OPTICAL

TRANSMITTER

CFO100 user manual 5

CRT103 stand-alone installation

The units can be installed for stand-alone use by using a CMA015

(installation for one 5HP wide units) module adapters. To insert a

CRT103 card unit into the module adapter, push the unit along the guide

rails into module until the unit is rmly attached. Secure the plug-in unit

with the upper and lower locking screws. The stand-alone unit should be

mounted to a vertical surface.

The permitted supply voltage range is 10.5...14 VDC. The current

consumption is 300 mA. The permitted operational temperature range is

-34...+74°C.

Note! Alternatively the units can be installed for stand-alone use by

using a CMA025 (installation for two 5HP wide units) or CMA035

(installation for three 5HP wide units) module adapters.

The 12V DC supply voltage is supplied by the means of a separate

mains adapter with a regulated output, (e.g. CPS251). Please refer to

separate documention for module adapters and mains adapters.

For limited space installation the CMA015/025/035 module adapters can

be rear-mounted by means of an optional installation kit CIK002.

CPS251 12VDC mains adapter.

CMA015 module adapter.

CMA025 module adapter with CIK002 rear mounting kit.

1. CMA025 module adapter

2. CIK002 rear mounting kit

DC connection polarity

210.9

133

35.5

CMA CPS

6CFO100 user manual

Fibre connection

The optical connector is of the type ST. The optical output level is

typically -4 dBm. For testing purposes the CFO100 series transmitter

and receicer can be connected with a short bre patch cable.

The operating wavelenght is 1310 nm.

When installing the bre optic cable, do not exceed the minimum bending

radius when connecting cable to the system.

Note! For correct optical operation ensure that all optical

connectors are cleaned immediately before mating. Connectors

should always be cleaned using high purity alcohol (e.g. methyl or

isopropyl alcohol). Dry the surfaces using clean compressed air or

other equivalent pressurised gas. The female ST optical

connectors on the equipment should always be protected with

dustcaps when there is no bre inserted.

Optical connection meets class 1M laser safety requirements of IEC

60825-1: 2001 and US department of health services 21 CFR 1040.10

and 1040.11 (1990) when operated within the specied temperature,

power supply and duty cycle ranges.

top view

ST Connectors.

Make sure the key is aligned in the slot

properly before tightening!

RADIATION

INVISIBLE LASER

CLASS 1M

CFO100 user manual 7

CRR101/103 single and triple channel video receiver

General

The CRR101 is a one channel optical receiver for uni-directional video

transmission in a multimode bre. The current consumption is 130 mA

(+12 VDC).

The CRR103 is a three channel optical receiver for uni-directional video

transmission in a multimode bre. The current consumption is 300 mA

(+12 VDC).

Frame installation

The CRR101/103 module is to be pushed along the guide rails into

the installation frame (e.g. CSR216 or 316 series) and secured with

the two locking screws. The unit can be freely positioned in any slot in

the frame. The empty positions in the frame should be blanked off with

cover plates. The supply voltage is to be provided by a CPS384 or

CPS390 power supply unit which are installed back of frame.

Video connections and indicator LEDs

The impedance of the video outputs (BNC female) is 75 Ω. The nominal

output level is 1 Vpp.

Link status indicator LEDs

When the optical input signal level is adequate and syncronization on

link level is achieved, the LINK STATUS led on the front panel is green.

If optical input signal is missing or it’s level is too low, the LINK STATUS

led is yellow.

CRR103 Optical Receiver

1) Locking screw (2 pcs)

2) Video output (BNC female)

3) Optical input (ST)

4) Link status indicator led

5) Handle (with unit information)

See further information on

dedicated sections.

Note! CRR101 is a single

channel version of CRR103.

CRR103

OPTICAL

RECEIVER

8CFO100 user manual

CRR101/103 stand-alone installation

The units can be installed for stand-alone use by using a CMA015

(installation for one 5HP wide units) module adapters. To insert a

CRR101/103 card unit into the module adapter, push the unit along the

guide rails into module until the unit is rmly attached. Secure the

plug-in unit with the upper and lower locking screws. The stand-alone

unit should be mounted to a vertical surface.

The permitted supply voltage range is 10.5...14 VDC. The current

consumption for CRR101 is 130 mA and for CRR103 300 mA.

The permitted operational temperature range is -34...+74°C.

Note! Alternatively the units can be installed for stand-alone use by

using a CMA025 (installation for two 5HP wide units) or CMA035

(installation for three 5HP wide units) module adapters.

The 12V DC supply voltage is supplied by the means of a separate

mains adapter with a regulated output, (e.g. CPS251). Please refer to

separate documention for module adapters and mains adapters.

For limited space installation the CMA015/025/035 module adapters can

be rear-mounted by means of an optional installation kit CIK002.

CPS251 12VDC mains adapter.

CMA015 module adapter.

CMA025 module adapter with CIK002 rear mounting kit.

1. CMA025 module adapter

2. CIK002 rear mounting kit

DC connection polarity

210.9

133

35.5

CMA CPS

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Teleste Trasmettitore

Teleste

Teleste CFO OP-X series Manuale utente

Manuali Trasmettitore popolari di altre marche

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuale del proprietario

Honeywell

Honeywell 5816WMBR Manuale utente

Kamstrup

Kamstrup READy MTU Istruzioni operative

Omega

Omega ZW Series Manuale utente

ABB

ABB Field 264H Guida

Alinco

Alinco DJ-V17T Manuale utente

Dejero

Dejero EnGo 3x Manuale utente

Rosemount

Rosemount 4600 Manuale utente

Speaka Professional

Speaka Professional 2342740 Manuale utente

trubomat

trubomat GAB 1000 Manuale utente

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuale utente

Rondish

Rondish UT-11 Manuale utente

MG 10JRE Manuale utente

Burkert

Burkert 8177 Manuale utente

Firetide

Firetide HotPort 3203 Manuale

Tele Radio

Tele Radio T9-02 Manuale utente

Rotronic

Rotronic HygroFlex HF3 Series Manuale utente

Jamara

Jamara FCX6 Pro Tel Manuale utente