Memory
event
“Alarm” melody in case of memory event presence, after
disarming the system.
Chime
Short beeps with subsequently increasing period, indicating
intrusion into an entry-exit type zone with an activated chime
option, when the system is disarmed.
Arming Two short sound signals indicating system ARMING followed
by the signalization for exit time.
Disarming Three short sound signals indicating system DISARMING.
Access Codes for Programming and Management
Type Code Functions
Engineer 7777
(default)
- Direct entry into “Device enrollment” mode.
- Changing own code.
- Keyboard settings.
Manager 0000
(default)
- Arming/Disarming the system.
- Setting, changing and deleting user access codes.
- Changing own code.
- Keyboard settings.
- Clearing the memory event indication.
User
(1-6)
-- Arming/Disarming the system.
- Changing own code.
- Keyboard settings.
- Clearing the memory event indication.
LED Indication for System Status
Icon Description Color State Description
Arming
button Red
Lights on System is Armed
Blinking - Enrolling to panel
- Entry in programming mode
Disarming
button Green
Lights on System is Disarmed
Blinking
- Conrmation for enrollment
- Entry at address in
programming mode
Warning
indicator
for troubles
and memory
events*
Yellow Lights on System is disarmed, trouble
event presence
Blinking Selected device (from the panel)
Red
Lights on System is armed/disarmed,
memory event presence
Blinking Disabled value in programming
mode; set user code at address
*Note: In case of presence of a technical trouble and a memory event at the
same time, the indication for memory event is with higher priority.
User Operation
Arming with a code
The user can perform Full or Stay Arming of BRAVO panel.
To perform Full arm, enter in sequence:
Manager or User code - - 1 - Exit time starts running
To perform Stay arm, enter in sequence:
Manager or User code - - 2 - Exit time starts running
Quick Arming without a code
The quick arming without a code is available when the option “Keyboard quick
Arm Buttons” is Enabled (via ProsTE software) for the BRAVO panel to which
the BRAVO KBD is enrolled.
To perform Quick Full arm, enter in sequence:
- 1 - Exit time starts running
To perform Stay arm, enter in sequence:
- 2 - Exit time starts running
Disarming
The disarming is performed with entering of valid Manager or User code.
Blocking the keyboard
In case of entering of three wrong (not valid) user codes in sequence,
conrmed with #, the keyboard will be blocked for operation for 90 seconds.
Sending of a panic alarm
In case of emergency situation, the User can activate a panic alarm, pressing
and holding for 3-5 sec the buttons combination (the panics type - silent or
audible - are set via ProsTE software):
1+3 – Police panic alarm (silent by default)
4+6 – Medical panic alarm (silent by default)
7+9 – Fire alarm panic alarm (audible)
The keyboard will conrm with three short sound signals.
Clear the indication for event memory
The presence of a memory for an alarm event is indicated with lighting on
red icon . The indication will stay active until the next arming, but can be
cleared manually after entry in memory events review menu on the BRAVO
panel and introducing a manager or user code:
Button on BRAVO panel - Manager or User code -
User Programming
Attention: The programming is accessible when the system is disarmed!
Address Description Default Rights
00 Changing own code. -
Engineer,
Manager,
Users
01 Set, change, delete User code 1. -
Manager
02 Set, change, delete User code 2. -
03 Set, change, delete User code 3. -
04 Set, change, delete User code 4. -
05 Set, change, delete User code 5. -
06 Set, change, delete User code 6. -
20 Enable/Disable Trouble Sounds
signalization of the keyboard. Enabled
Engineer,
Manager,
Users
21 Keyboard buzzer sound volume (1-9).
Set “0” to disable the sound volume. 5
22 Keyboard backlight intensity (1-9).
Set “0” to disable the backlight activation. 5
How to change own code
This setting is accessible for all type access codes: Engineer, Manager, User.
To change your own code, enter in sequence:
Code - # - 00 - + + are blinking – enter new code – #
For exit press “X” button.
How to set a new User code
This setting is accessible with Manager access code only. The presence of a
set code for a User is indicated with a blinking icon – see “How to change
a user code”.
To set a new code for User 1 (in the example), enter in sequence:
Manager code - # - 01 - + are blinking - enter code – #
For exit press “X” button.
How to change a user code
This setting is accessible with Manager access code only.
To change the code for User 1 (in the example), enter in sequence:
Manager code - # - 01 - + + are blinking – enter new code – #
For exit press “X” button.
How to delete a user code
This setting is accessible with Manager access code only.
To delete the code for User 1 (in the example), enter in sequence:
Manager code - # - 01 - + + are blinking – press and hold “0”
button to delete the code - 3 short beeps will conrm the operation
At next entry at address 01, only icons + are blinking, which means no
code combination for User 1 is set. For exit press “X” button.
How to disable Trouble Sounds signalization of BRAVO KBD
This setting is accessible for all type access codes: Engineer, Manager, User.
The Trouble sounds signalization from BRAVO KBD keyboard is Enabled by
default. The option is disabled when is indicated with a blinking icon at
address 20. To disable the Trouble sound signalization, enter in sequence:
Code - # - 20 - + are blinking - press any key -
+ + are blinking - #
For exit press “X” button.
How to change the buzzer sound level of BRAVO KBD
This setting is accessible for all type access codes: Engineer, Manager, User.
The buzzer sound level can be set in range from 1 (lowest) to 9 (the highest).
The buzzer sound can be entirely muted with setting 0 (no sound).
To change the buzzer sound level, enter in sequence:
Code - # - 21 - + are blinking – set sound level 1-9 - #
For exit press “X” button.
How to change the intensity backlight of buttons of BRAVO KBD
This setting is accessible for all type access codes: Engineer, Manager, User.
The backlight intensity of the digit buttons can be set in range from 1 (lowest)
to 9 (the highest). The backlight can be entirely turned o with setting 0.
To change the intensity of the backlight of the buttons, enter in sequence:
Code - # - 22 - + are blinking - set intensity 1-9 - #
For exit press “X” button.
Direct entry into “Device enrollment” mode with BRAVO KBD
For direct entry into the “Device enrollment” mode of BRAVO panel, enter in
sequence:
Engineer code - # - the panel is in “Device enrollment” mode
For exit press “X” button of the keyboard.
Changing Batteries
It is recommended rst to bypass the keyboard from the panel. Then remove
the cover of the battery compartment and change the batteries with new ones.
After that de-bypass the keyboard from the panel. 18021103, RevA, 06/2021
