Teltonika FMB964 Guida all'installazione

Quick Manual

v1.0

Special and smart tracker

FMB964

FMB964 | Wiki

Table of Contents

Know your device .......................................................................... 3

Pinout................................................................................................. 4

Wiring scheme ............................................................................... 5

Set up your device......................................................................... 6

How to insert Micro-SIM card.......................................................... 6

PC Connection (Windows)................................................................ 7

How to install USB drivers (Windows)............................................. 7

Configuration (Windows) ................................................................. 7

Quick SMS configuration.................................................................. 9

Mounting recommendations ..................................................... 10

LED indications ............................................................................ 11

Characteristics............................................................................. 11

Basic characteristics ....................................................................... 11

Electrical characteristics................................................................. 13

Safety information...................................................................... 14

Certification and Approvals ....................................................... 15

Warranty ...................................................................................... 16

Warranty Disclaimer........................................................................16

FMB964 | Wiki

Know your device

Figure 1 FMB964 device view

FMB964 | Wiki

Pinout

Table 1 Pinout

Pinnumber

Pinname

Description

VCC (6-30)V DC (+)

(Red) Power supply (+6-30 V DC)

GND (-)

(Black) Ground

DIN1

(Yellow) Digital input, channel 1.

DEDICATED FOR IGNITION INPUT

AIN1

(Grey) Analog input, channel 1. Input

range: 0-30 V DC

DOUT1

(White) Digital output. Open collector

output. Max. 3,3 A DC.

Figure 2 FMB964 pinout

FMB964 | Wiki

Figure 3 FMB964 Wiring scheme

Wiring scheme

Automotive relay

FMB964 | Wiki

Set up your device

How to insert Micro-SIM card

1. Gently remove FMB964 cover using plastic pry tool from both

sides.

2. Insert Micro-SIM card as shown with PIN request disabled or

read our Wiki how to enter it later in Teltonika Configurator.

Make sure that Micro-SIM card cut-off corner is pointing

forward to slot.

3. Connect the battery as shown on device. Position the battery in

place where it does not obstruct other components.

4. After configuration, see PC Connection (Windows), attach

device cover back and screw in all screws.

Figure 7 Attaching cover back

Figure 4 Cover removal

Figure 5 Micro-SIM card insert

Figure 6 Connect battery

FMB964 | Wiki

PC Connection (Windows)

1. Power-up FMB964 with DC voltage (6 –30 V) power supply

using power wires. LED’s should start blinking, see “LED

indications”.

2. Connect device to computer using Micro-USB cable or

Bluetooth connection:

Using Micro-USB cable

▬You will need to install USB drivers, see “How to install

USB drivers (Windows)”

Using Bluetooth

▬FMB964 Bluetooth is enabled by default. Turn on

Bluetooth on your PC, then select Add Bluetooth or

other device > Bluetooth. Choose your device named –

“FMB964_last_7_imei_digits”, without LE in the end.

Enter default password 5555, press Connect and then

select Done.

3. You are now ready to use the device on your computer.

How to install USB drivers

(Windows)

1. Please download COM port drivers from here.

2. Extract and run TeltonikaCOMDriver.exe.

3. Click Next in driver installation window.

4. In the following window click Install button.

Setup will continue installing the driver and eventually the

confirmation window will appear. Click Finish to complete the

setup.

Configuration (Windows)

At first FMB964 device will have default factory settings set. These

settings should be changed according to the user's needs. Main

configuration can be performed via Teltonika Configurator

software. Get the latest Configurator version from here.

Configurator operates on Microsoft Windows OS and uses

prerequisite MS .NET Framework. Make sure you have the correct

version installed.

Table 2 MS .NET requirements

MS.NETrequirements

Operating

system

MS .NET Framework

version

Version

Links

Windows Vista

Windows 7

Windows 8.1

Windows 10

MS .NET Framework

4.6.2

32 and 64 bit

www.microsoft.com

Downloaded Configurator will be in compressed archive. Extract it

and launch Configurator.exe. After launch software language can

be changed by clicking in the right bottom corner (Figure 8

Language selection).

FMB964 | Wiki

Configuration process begins by pressing on connected device

(Figure 9 Device connected via USB).

After connection to Configurator Status window will be displayed

(Figure 10 Configurator Status window).

Various Status window tabs display information about GNSS,

GSM,I/O, Maintenance and etc. FMB964 has one user editable

profile, which can be loaded and saved to the device. After any

modification of configuration the changes need to be saved to

device using Save to device button. Main buttons offer following

functionality:

1. Load from device –loads configuration from device.

2. Save to device –saves configuration to device.

3. Load from file –loads configuration from file.

4. Save to file –saves configuration to file.

5. Update firmware –updates firmware on device.

6. Read records –reads records from the device.

7. Reboot device –restarts device.

8. Reset configuration –sets device configuration to

default.

Most important configurator section is GPRS –where all your

server and GPRS settings can be configured and Data Acquisition

–where data acquiring parameters can be configured.

More details about FMB964 configuration using Configurator can

be found in our Wiki.

Figure 9 Device connected via USB

Figure 8 Language selection

Figure 10 Configurator Status window

FMB964 | Wiki

Quick SMS configuration

Default configuration has optimal parameters present to ensure

best performance of track quality and data usage.

Quickly set up your device by sending this SMS command to it:

Note: Before SMS text, two space symbols should be inserted.

GPRS settings:



2001

–APN

–APN username (if there

2002

are no APN username, empty

field should be left)

–APN password (if there

2003

are no APN password, empty

field should be left)

Server settings:

–Domain

2004

–Port

2005

–Data sending protocol

2006

(0 –TCP, 1 –UDP)

Default configuration settings

Movement and ignition detection:

Vehicle movement will

be detected by

accelerometer

Ignition will be detected

by vehicle power voltage

between 13,2 –30 V

Device makes a record On Moving if one of these events happen:

300 seconds passes

Vehicle turns 10 degrees

Vehicle drives 100

meters

Speed difference

between last coordinate

and current position is

greater than 10 km/h

Device makes a record On Stop if:

1 hour passes while

vehicle is stationary

and ignition is off

Records sending to server:

If device has made a

record it is sent to the

server every 120

seconds

After successful SMS configuration, FMB964 device will

synchronize time and update records to configured server.

Time intervals and default I/O elements can be changed by using

Teltonika Configurator or SMS parameters.

" setparam :APN;

2001

:APN_username;

2002

:APN_password;

2003

:Domain;

2004

:Port;

2005

:0;"

2006

FMB964 | Wiki

Mounting recommendations

Connecting Wires

▬Wires should be fastened to the other wires or non-moving

parts. Try to avoid heat emitting and moving objects near

the wires.

▬The connections should not be seen very clearly. If factory

isolation was removed while connecting wires, it should be

applied again.

▬If the wires are placed in the exterior or in places where they

can be damaged or exposed to heat, humidity, dirt, etc.,

additional isolation should be applied.

▬Wires cannot be connected to the board computers or

control units.

Connecting power source

▬Be sure that after the car computer falls asleep, power is still

available on chosen wire. Depending on car, this may

happen in 5 to 30 minutes period.

▬When module is connected, measure voltage again to make

sure it did not decrease.

▬It is recommended to connect to the main power cable in

the fuse box.

▬Use 3A, 125V external fuse.

Connecting ignition wire

▬Be sure to check if it is a real ignition wire i. e. power does not

disappear after starting the engine.

▬Check if this is not an ACC wire (when key is in the first position, most

of the vehicle electronics are available).

▬Check if power is still available when you turn off any of vehicles

devices.

▬Ignition is connected to the ignition relay output. As alternative, any

other relay, which has power output when ignition is on, may be

chosen.

Connecting ground wire

▬Ground wire is connected to the vehicle frame or metal parts that are

fixed to the frame.

▬If the wire is fixed with the bolt, the loop must be connected to the

end of the wire.

▬For better contact scrub paint from the spot where loop is going to

be connected.

▬

PAY ATTENTION! Connecting the power supply must be

carried out in a very low impedance point of on-board

vehicle network. Connecting the GND at an arbitrary

point to the mass of the car is unacceptable, as static

and dynamic potentials on the line GND will be

unpredictable, which can lead to unstable FMB964

operation and even its failure.

Indice

Altri manuali Teltonika GPS

Teltonika

Teltonika GH3000 Manuale utente

Teltonika

Teltonika FMB920 Manuale utente

Teltonika

Teltonika TMT250 Guida all'installazione

Teltonika

Teltonika FM3622 Manuale utente

Teltonika

Teltonika FMB630 Manuale utente

Teltonika

Teltonika FMB125 Guida all'installazione

Teltonika

Teltonika FMB225 Guida all'installazione

Teltonika

Teltonika FMB140 Guida all'installazione

Teltonika

Teltonika FTC961 Manuale utente

Teltonika

Teltonika MTB100 Guida all'installazione

Teltonika

Teltonika FMB010 Guida all'installazione

Teltonika

Teltonika FMC650 Guida all'installazione

Teltonika

Teltonika Telematics FMB150 Guida all'installazione

Teltonika

Teltonika FM3620 Manuale utente

Teltonika

Teltonika FM1010 Manuale utente

Teltonika

Teltonika FMC00A Guida all'installazione

Teltonika

Teltonika Telematics FTC921 Manuale utente

Teltonika

Teltonika Telematics FTC881 Manuale utente

Teltonika

Teltonika FMM003 Manuale utente

Teltonika

Teltonika FMC230 Guida all'installazione

Teltonika

Teltonika GH5200 Manuale utente

Teltonika

Teltonika FMM00A Guida all'installazione

Teltonika

Teltonika FMM80A Guida all'installazione

Teltonika

Teltonika FMB920 Manuale utente

Manuali GPS popolari di altre marche

Raven

Raven Cruizer II Manuale

Hama

Hama 53118 Manuale utente

Garmin

Garmin SOUNDER 125 Manuale utente

Garmin

Garmin DEZL 580 Manuale utente

Jigabot

Jigabot EX Manuale utente

Pointer

Pointer Cellocator CelloTrack XT LTE Guida all'installazione

Queclink

Queclink GV55LITE Manuale utente

Voxson

Voxson Voxtrack GPS500 Manuale di istruzioni

Garmin

Garmin ECHOMAP PLUS Manuale utente

Starcom Systems

Starcom Systems Kylos Compact Manuale utente

Garmin

Garmin 15 H Series Manuale utente

Cobra

Cobra Marine MC 600Ci Manuale utente

Cellocator

Cellocator CelloTrack T Manuale utente

Enfora

Enfora Mini-MT GSM2228UG001 Manuale utente

Magellan

Magellan eXplorist 100 Manuale utente

LTE

LTE G50B Manuale utente

Garmin

Garmin DEZL OTR500 Manuale utente

SkyGolf

SkyGolf SkyCaddie SG1 Manuale utente