Tenda S105 Manuale utente

is the registered trademark of Shenzhen

Tenda Technology Co., Ltd. All the products and product

names mentioned herein are the trademarks or registered

trademarks of their respective holders. Copyright of the

whole product as integration, including its accessories

and software, belongs to Shenzhen Tenda Technology Co.,

Ltd. Without the permission of Shenzhen Tenda Technology

Co., Ltd, any individual or party is not allowed to copy,

plagiarize, imitate or translate it into other languages.

All the photos and product specifications mentioned in

this guide are for references only. As the upgrade of

software and hardware, there will be changes. And if

there are changes, Tenda is not responsible for informing

in advance. If you want to know more about our product

information, please visit our website at www.tenda.cn.

Contents

1. Introduction ------------------------------------------------2

1.1 Switch Features -------------------------------------2

1.2 Package Contents----------------------------------3

1.3 Front Panel and Rear Panel Specifications -------3

1.4 LED Indicator Specifications -----------------------4

2. Installation -------------------------------------------------5

2.1 Before Connecting to the Network----------------5

2.2 Connecting to End Nodes -------------------------6

2.3 Switch to Router or Switch--------------------------6

3. Product Specification -------------------------------------7

1. Introduction

S105/S108 Ethernet Switch, a mini desktop switch, is

designed for SOHO, student dormitory and small

enterprise users. It has 5/8 10/100Mbps Auto-negotiation

Ethernet ports, supports auto MDI/MDIX and

store-and-forward function to make sure the packet to be

sent each port effectively. “Plug and play” function helps

you set up easily. In addition, it also supports MAC address

auto-learning and aging. Moreover, it integrates

2K(S105)/1K(S108) MAC address table. Its easy setup and

no network management will benefit you a lot. Exquisite

and high-stable, it is your best choice to share the Internet.

1.1 Switch Features

zComplies with the IEEE802.3 10Base-T Ethernet,

IEEE802.3u 100Base-TX Fast Ethernet standards.

zSupports NWAY auto-negotiation function,

auto-detect transfer data rate, Half/Full-duplex.

zProvides 5/8 10/100Mbps Auto-sensing RJ45 ports

and supports Auto MDI/MDIX.

zSupports IEEE802.3x flow control for Full-duplex,

and Backpressure flow control for Half-duplex.

zSupports non-blocking line speed forwarding.

zSupports store-and-forward switching method.

zSupports MAC address auto-learning/aging

function and integrates 2K(S105)/1K(S108)MAC

address table.

1.2 Package Contents

Please check the articles carefully after you open the

packing as below:

One 5/8-Port Fast Ethernet Switch

One Power Adapter

One User Guide

If any of the listed items are missing or damaged, please

contact the reseller from whom you purchased for

replacement.

1.3 Front Panel and Rear Panel Specifications

The front panel of 5/8 Port Fast Ethernet Switch includes

Link/Act indicators and one power indicator. Please refer

to the detailed description of these indicators in LED

Indicator Specifications

The Rear Panel of the Switch includes 5/8 10/100Mbps

RJ45 ports and one AC power port used for AC power

input is located in the side panel of the Switch.

Notice: Please use the delivery-attached power supply. If

not, the Switch may be damaged.

1.4 LED Indicator Specifications

The LED indicators of the Switch include Power and

Link/Act. You can see their operating situation through

hese LED indicators.

The following chart shows the LED indicators of the Switch

along with explanation of each indicator.

LED

Color Status Description

Power Gree

n ON This indicator lights

when the Switch

powers on.

— OFF

If this indicator is

not lighting,

please check the

AC power

connector to

ensure the correct

connection of the

power adapter.

Gree

n ON The other devices

connect to the

port of the Switch.

Link/Act Gree

n Blinking

The port is

transmit- ting or

receiving data

packets.

2. Installation

2.1 Before Connecting to the Network

Before connecting the S105/S108 to the network, please

pay attention to the following instructions:

¾Don’t put heavy articles on the Switch.

¾Power sockets and equipments should be within 1.5

meters of the Switch.

¾Check power supply to confirm the safe connection.

¾Make sure there’s adequate space for proper heat

dissipation and adequate ventilation around the

Switch.

2.2 Connecting to End Nodes

Use standard Ethernet cable to connect the Switch to end

nodes as described below. Switch ports will automatically

adjust to the characteristics (MDI-II/MDI-X, speed, duplex)

of the device to which is connected.

Switch connecting to an end node

Please refer to the LED Indicator Specifications. The

Link/Act LEDs for each port lights green when the link is

available.

2.3 Switch to Router or Switch

Connecting to another router or switch

Please refer to the LED Indicator Specifications. The

Link/Act LEDs for each port lights green when the link is

available.

3. Product Specification

Standards IEEE802.3 10Base-T Ethernet

IEEE802.3u 100 Base-TX Fast

Ethernet

Protocol CSMA/CD

Topology Star

Network Cables 10 Base -T: Cat.3 UTP or

above

100 Base -TX: Cat.5 UTP /STP

Speed 10/100Mbps

Transmission Method

Fast store-and-forward

MAC Address Table 2K(S105)/1K(S108)

14880pps(10Mbps)per port

Packet Filtering/

Forwarding Rate 148800pps(100Mbps)per port

MAC Address

Learning Self-learning, auto-aging.

Backplane

Bandwidth 1Gbps(S105)/ 1.6Gbps(S108)

Power External universal power

supply

AC INPUT AC 9V 600mA

Power Consumption 2.7W(S105)/4.2W(S108)

Operating

Temperature 0℃-40℃

Storage

Temperature -40℃-70℃

Working Humidity 10% ～90% RH (no

condensing)

Storage Humidity 5% ～95% RH (no

condensing)

Altri manuali per S105

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza