Tenda TEI480T Manuale utente

TEI480T/490T/4000TEI480T/490T/4000

Enterprise & Net-bar Level Router

User's ManualUser's Manual

WWW.TENDA.CN

is the registered trademark of Shenzhen Tenda

Technology Co., Ltd. Other trademark or trade name mentioned herein

are the trademark or registered trademark of the company. Copyright

of the whole product as integration, including its accessories and

software, belongs to Shenzhen Tenda Technology Co., Ltd. Without

the permission of Shenzhen Tenda Technology Co., Ltd, individual or

party is not allowed to copy, plagiarize, imitate or translate it into other

languages.

All the photos and product specifications mentioned in this manual

are for references only, as the upgrading of software and hardware,

there will be changes. And if there are changes, Tenda is not

responsible for informing in advance. If you want to know more about

our products information, please visit our website at www.tenda.cn

TEI480T/490T/4000 Enterprise & Net-bar Level Router

Table of Contents

Chapter One Introduction………………………………………………...…...3

1.1 Function……………………………………………………….……………...3

1.2 Unpacking……………………………………………………………….…...5

Chapter Two Hardware Installation………………………………………….6

2.1 Front Panel………………………………………………………………..…6

2.2 Rear Panel…………………………………………………………….……..7

2.3 Physical Environment………………………………………………….……7

2.4 Steps………………………………………………………………….…..…..7

Chapter Three Connect to the Broadband Router……………….……….8

3.1 Set up LAN Connection……………………………………………….……8

3.2 Set up WAN Connection……………………………………………………8

Chapter Four Configuration on the Router………………………...………9

4.1 Set up proper Network Configuration…………………………………..…9

4.2 ISP Configuration………………………………………………...……...…10

4.2.1 Wizard………………………………………………………….………….10

4.2.1.1 PPPoE (ADSL)……………………………………….…………………11

4.2.1.2 Dynamic IP……………………………………………….……………..11

4.2.1.3 Static IP……………………………………………………….…………11

4.3 Configuration…………………………………………………..……………12

4.3.1 Start and Log In…………………………………………………………..12

4.3.2 Running Status…………………………………………………………...12

4.3.3 General Setting……………………………………………..……………13

4.3.3.1 LAN Setting……………………………………………….…………….13

4.3.3.2 WAN Setting…………………………………………….…………...…14

4.3.3.3 MAC Clone……………………………………………………………..15

4.3.3.4 DNS Server……………………………………………………..……...16

4.3.3.5 Access Limit…………………………………………………………….16

4.3.4 DHCP Server……………………………………………………………..17

4.3.4.1 LAN DHCP Server………………………………………..……………17

4.3.4.2 DHCP Client List…………………………………………………… .. 18

TEI480T/490T/4000 Enterprise & Net-bar Level Router

4.3.5 Advance Setting…………………………………………….....…………19

4.3.5.1 Statistic……………………………………………………………….…19

4.3.5.2 Port Monitor…………………………………………………………….20

4.3.5.3 VLAN……………………………………………………………...…….20

4.3.5.4 Bandwidth Control……………………………………………..………21

4.3.5.5 LAN IP Control…………………………………………………..……..22

4.3.5.6 ARP Bind………………………………………………………..………22

4.3.6 Virtual Server………………………………………………………….….23

4.3.6.1 Virtual Server…………………………………………….………….….23

4.3.6.2 UPnP Setting………………………………………..………….……....25

4.3.6.3 DMZ…………………………………………………………….….……25

4.3.7 Security Setting…………………………………………….…………….26

4.3.7.1 Client Filter………………………………………………..……………26

4.3.7.2 URL Filter……………………………………………………………….27

4.3.7.3 MAC Filter………………………………………………………………28

4.3.7.4 Defense Network Attack……………………………..………………..29

4.3.7.5 Remote Control………………………………………………….……..30

4.3.7.6 Special Application Filter………………………………………………31

4.3.8 Route Setting………………………………………………….……….…31

4.3.8.1 System Routing Table………………………………………………….31

4.3.8.2 Static Routing Table……………………………………………………32

4.3.9 System Tool………………………………………………..….………….32

4.3.9.1 Time Setting…………………………………………………………….33

4.3.9.2 DDNS………………………………………………………….…..…….33

4.3.9.3 Backup/ Resume settings…………………………………..…...…….34

4.3.9.4 Software Upgrade ………………………………………….….…...….35

4.3.9.5 Restore to Factory Setting………………………………….……....…36

4.3.9.6 Restart……………………………………………………………...…...36

4.3.9.7 Change Password……………………………………….….……..…..37

4.3.9.8 System Log………………………………………………….………….37

4.3.9.10 Log out……………………………………………………………...…37

TEI480T/490T/4000 Enterprise & Net-bar Level Router

Chapter One Introduction

Thanks for purchasing TEI480T/490T/4000 Enterprise/Net-bar level router.

TEI480T/490T/4000 is Tenda’s latest multifunctional broadband access

products specially designed for Net-bar, community, enterprise and school.

TEI480T/490T/4000 are adopting the world level high quality, high stability

Intel IXP high level network processor, main Frequency is up to 266/533

MHz, adopting six-layers PCB professional design, fully ensuring the

powerful function and super stability of the machine. Full duplex data

transferring up to 200Mbps, supports up to 60,000 Link counts, data packing

is fast and stable. Powerful Firewall is able to prevent various hacker

attacks, ARP attacks and cheating and ARP virus etc.

TEI480T/490T/4000 are equipped with all the common function of other

broadband routers, besides, TEI480T/490T/4000 also supports Statistic

monitoring on clients, Bandwidth control based on IP address, Link Count

Controlling on a certain computer, IP and MAC address binding, Port

Mirroring, VLAN, UPnP, DDNS, VPN Pass-through and Firewall etc. Please

read this user’s manual carefully before using.

1.1 Function

 Compliant with IEEE802.3, IEEE802.3u, IEEE802.3x

 Supports CSMA/CD, PPPoE, PPP, IP, ARP, DHCP, TCP, UDP, HTTP,

FTP, DNS protocol

 Supports 1 10/100Mbps Auto-Negotiation WAN port, connectable to

xDSL/Ethernet/Cable

TEI480T/490T/4000 Enterprise & Net-bar Level Router

 Supports 4 10/100Mbps Auto-Negotiation LAN ports, connectable to

LAN

 Supports port bandwidth control, port VLAN dividing and port mirroring

 Supports Statistic function, enables administrator to analyses the

whole network usages status

 Support Web-Management function including IP client filtering, URL

Filtering, MAC Address filtering etc.

 Support VPN Pass-through

 Supports QoS configuration based on IP or Port, enables you to

control the bandwidth of a certain client

 Supports IP and MAC address binding, prevent from ARP attacks

 Support virtual server, special software, DMZ and static routing

 Supports Link count configuration and limit the Link count of a certain

computer

 Built-in firewall, supports IP address Filtering, URL Filtering，MAC

Address Filtering

 Prevent from DoS attack, ARP attack, able to separate the computer

which is infected by virus

 Support remote Web Management, English configuration Interface,

supports simple and easy configuration guide

 TEI4000 supports one SFP expansion slot, supports optical fiber

connection

TEI480T/490T/4000 Enterprise & Net-bar Level Router

1.2 Unpacking

ITEM Quantity

TEI480T/490T/4000 Enterprise and Net-bar Level router 1 Unit

Power cord 1

User’s Manual 1 copy

Quality Warranty Card 1 copy

Quality Passed Certificate 1 copy

Fast installation guide 1 pcs

Mounting Brackets 4 pcs

Rubber feet used for shock cushioning 4 pcs

TEI480T/490T/4000 Enterprise & Net-bar Level Router

Chapter Two Hardware Installation

2.1 Front Panel

a. Reset: Button for Resetting the router. Please press the Reset Button for

5 seconds and the SYS LED Indicator would be blinking. After 5 seconds,

please un-press the button, the router would restore to factory default

setting and restart automatically.

b. LED Indicators:

LED

Indicator

Description Function

POWER Indicating the

Status of the Power

When the power LED lights on, the

Switch is receiving power

SYS Indicating the

Status of the

System

When the SYS LED is blinking, the

system is working normally.

When the SYS LED lights ON or OFF,

the system is working abnormally.

Link/Act Indicating the

Status of WAN and

LAN

When the LED lights ON, the

respective port is successfully

connected to the Ethernet network.

When the LED is blinking, the

respective port is transmitting or

receiving data.

100Mbps Indicating the When the LED for 100M lights ON, the

TEI480T/490T/4000 Enterprise & Net-bar Level Router

Speed of WAN and

LAN

respective port is working at the speed

of 100M;

When the LED for 100M lights OFF, the

respective port is working at the speed

of 10M

c. WAN Port: Wide Area Network (RJ-45). Please connect the xDSL Modem

or the Ethernet access cable to the WAN port of the router.

d. LAN Port: Local Area Network (RJ-45). Please connect the LAN port to

computer, Hub or Switch.

2.2 Rear Panel

Power: Please use the power attached in the package.

2.3 Physical Environment

Required Physical Environment for Installation:

 Please place the router on a sturdy level surface and install the router

in a site free from high heat.

 Please place the router in wet or dirty places.

 Please do not wipe the router with wet cloth.

 Recommend operating environment:

Temperature:0℃~38℃(32℉~100℉)

Humidity: 5%~90% RH (Non-condensing)

2.4 Steps

a. Set up LAN Hardware connection

TEI480T/490T/4000 Enterprise & Net-bar Level Router

Please connect the LAN port with the switches or Hubs in the LAN. Or you

can also connect the LAN port of your router directly to the LAN adapter of

your computer.

b. Set up WAN Hardware connection

Please connect your xDSL or Ethernet to the WAN port of the router with

Cat. 5 cable.

c. Connect the power cord

Please connect the power cord correctly and the router would start

automatically.

Note: TEI4000 supports one SFP expansion slot, supports optical fiber

connection

Altri manuali per TEI480T

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza