Tenda V300 Manuale utente

Quick Installation Guide

N300 Wi-Fi VDSL/ADSL Modem Router

V300

Package contents

Modem router

Power adapter

Ethernet cable (RJ45)

Phone cable (RJ11)

DSL splitter

Quick installation guide

This guide offers a basic introduction of the modem router and walks you through Quick Setup. For product or

function details, please go to www.tendacn.com

Get to know your device

LED indicators

LED

Indicator

Color

Status

Description

(Power LED

indicator)

Green

Solid on

The device completes startup and is working properly.

Blinking

The device is upgrading or is performing read-write operations.

Do not power off the device.

Off

The device is powered off.

(Internet

LED

indicator)

Green

Solid on

Internet access is available.

Off

Internet access is unavailable.

(WiFi 2.4G)

Green

Solid on

WiFi network is enabled.

Blinking

The device is performing WPS negotiation. If no client is

connected, the LED indicator keeps blinking for 2 minutes and

then turns solid on. If a client is connected successfully, the LED

indicator immediately turns solid on.

Off

WiFi network is disabled.

(LAN LED

indicator)

Green

Solid on

At least one wired device is successfully connected or data

transmission is under way over the LAN port.

Off

No wired device is connected.

Green

Solid on

The DSL negotiation is successful.

(DSL LED

indicator)

Blinking

The DSL negotiation is under way.

Off

No phone cable is connected or the phone cable is disconnected.

Ports and buttons

Button/Port

Description

DSL

DSL port. If you intend to set up the modem router for DSL service, this port is used to connect

to the phone jack for internet access.

1/2/3

10/100 Mbps auto-negotiation LAN ports. Used to connect to wired devices, such as

computers and IPTV set top boxes.

10/100 Mbps auto-negotiation WAN/LAN port. If you intend to set up the modem router for

cable or fiber service or you use the modem router as a second router, port 4 can be used as a

WAN port connected to the Ethernet jack. Otherwise, it serves as a LAN port.

WPS

WPS button. Enable the WPS function on the web UI, and then hold down this button for

about 3 seconds. When the LED indicator blinks, the modem router is performing WPS

negotiation.

RST

Reset button. When the LED indicator lights solid green, hold down this button for about

6 seconds and release it when all LED indicators light off and blink once. When the LED

indicator lights solid green again, the modem router is reset successfully.

PWR

Power jack. Use the included power adapter to connect this port to a power source for power

supply.

ON/OFF

Power button. Used to turn on/off the modem router.

Install the modem router

The modem router can be installed either on wall or desktop. Recommended specifications of screws and

plastic anchors you may use in the wall-mounting scenario are:

Screws: PA3*14mm

Plastic anchors: 2.4mm in inner diameter and 26.4mm in length

Connect the modem router

If you do not need phone service, directly use a phone cable to connect the phone jack to the DSL port of the

modem router, and then perform step 4 and 5. Otherwise, perform the following steps one by one.

1. Use a phone cable to connect the phone jack to the LINE port of the included DSL splitter.

2. Use a phone cable to connect your phone to the PHONE port of the DSL splitter.

3. Use a phone cable to connect the MODEM port of the DSL splitter to the DSL port of the modemrouter.

4. Use the included power adapter to connect the modem router to a power source, and press the ON/OFF

button. When the LED indicator lights solid green, the modem router completes startup.

5. Connect user devices such as computers, smartphones or tablets to the modem router.

Wired devices: Connect to port 1, 2, 3 or 4.

Wireless devices: Connect to the WiFi network of the modem router. The default WiFi name (SSID) and

password (WLAN Key) are specified on the bottom label of the modem router.

III

Configure the modem router

1. Start a web browser on a device connected to the modem router, enter 192.168.1.1 in the address bar, and

visit it. (Computer is taken as an example here)

2. Enter the login user name and password, and click Login. (The default user name and password are both

admin)

Tips:

To ensure network security, please change your password once logged in.

3. Wait for the modem router to detect your Link Type automatically. When the detection completes, the DSL

port icon on the page turns green.

4. Manually fill in other parameters as provided by your Internet service provider (ISP).

Tips:

•VDSL link type and PPPoE connection type are used here as an example.

•If you switch to a different link type after finishing the configurations for the previous link type, a prompt message “Configuration

conflict” may appear. In this case, perform all the steps again to reconfigure the modem router.

If you want to enter the VLAN parameters manually, deselect Auto Vlan scan and fill in the parameters.

5. Configure your wireless network.

Customize Wireless SSID and Wireless Key as required.

6. Click OK to apply thesettings.

Done.

When the Connection Status displays Connected, the modem router is connected to the internet successfully.

To access the internet with:

Wired devices: Connect to port 1, 2, 3 or 4 of the modem router.

Wireless devices: Connect to a WiFi network of the modem router using Wireless SSID and Wireless Key you

set.

FAQ

Q1: I cannot log in to the web UI of the modem router. What should I do?

A1:

If you are using a wireless device, such as a smartphone:

Verify that the device connects to the WiFi network of the modem router.

Verify that the cellular network (mobile data) of the device is disabled.

If you are using a wired device, such as a computer:

Verify that the Ethernet cable between your computer and the modem router is connectedproperly.

Verify that your computer is set to Obtain an IP address automatically and Obtain DNS server address

automatically.

Verify that you entered 192.168.1.1 in the address bar rather than the search bar.

Clear cache of your browser, or change another browser.

Use another computer to log in again.

If the problem persists, try resetting the modem router.

Q2: How to reset the modem router?

A2: When the LED indicator lights solid green, hold down the RST button for about 6 seconds and release

it when all LED indicators light off and blink once. When the LED indicator lights solid green again, the

modem router is reset successfully.

Q3: I cannot access the internet after completing the configuration. What should I do?

A3:

Observe the LED indicator. If the indicator does not light up, reconnect the phone cable between the

DSL port and Phone jack.

If you access the internet via the WAN port (port 4) of the modem router, check whether the connection

between port 4 and the upstream device or Ethernet jack is proper.

Observe the LED indicator. If the indicator does not light up, check whether the internet connection

parameters (Primary Settings) you entered are correct and ensure that the connection status on the web UI

is Connected.

If you are using a computer, verify that your computer is set to Obtain an IP addressautomatically.

If you are using wireless devices such as smartphones, verify that you connect to the WiFi network of the

modem router.

Contact your internet service provider for help.

Altri manuali per V300

Indice

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza