Tenda F303 Manuale utente

Tenda F303 Manual!

Chapter 1 Product Overview

1.1 Package Contents

Unpack the box and verify the package contains the following items:

➢Wireless Broadband Router

➢Power Adapter

➢Installation Guide

➢Resource CD(including User Guide, Quick Install Guide, and setup

wizard)

➢Ethernet Cable

If any of the above items is incorrect, missing, or damaged, please contact

your Tenda reseller for immediate replacement.

1.2 Getting to know your router

Before you cable your router, take a moment to become familiar with the

front and back panels and the label. Pay particular attention to the LEDs

on the front panel.

Front Panel

Front Pannel

LED

Status

Description

Power

Solid

Indicates a proper connection to the power

supply

Off

Indicates an improper connection to the power

adapter

SYS

Blinking

Indicates system is functioning properly

WPS

Solid

WPS is enabled

Blinking

Device is performing WPS authentication on a

client device

Off

WPS is disabled or WPS negotiation is finished

WIFI

Solid

Wireless is enabled

Blinking

Transferring data

Off

Wireless is disabled

LAN（1/2/3

）

Solid

LAN port connected correctly

Blinking

LAN port is transferring data

Off

LAN port connected incorrectly

WAN

Solid

WAN port connected correctly

Blinking

WAN port is transferring data

Off

WAN port connected incorrectly

Back Panel

Back LED Overview

Port

Description

WAN

Usually for connecting DSL MODEM、CABLE MODEM、

ISP to the Internet.

LAN(1/2/3)

Usually for connecting computers, switches .etc.

POWER

The power adapter is connected and you can use the provided

adapter to supply power.

WPS/ RESET

When you press this button for 7 seconds, files set by the router

will be deleted and restored to default factory settings; for 1 second,

WPS will be enabled and the WPS LED will be blinking

accordingly.

1.3 Position your Router

The router lets you access your network from virtually anywhere within

the operating range of your wireless network. However, the operating

distance or range of your wireless connection can vary significantly

depending on the physical placement of your router. For example, the

thickness and number of walls the wireless signal passes through can limit

the range. For best results, place your router:

•Near the center of the area where your computers and other devices

operate, and preferably within line of sight to your wireless devices.

•So it is accessible to an AC power outlet and near Ethernet cables for

wired computers.

•In an elevated location such as a high shelf, keeping the number of

walls and ceilings between the router and your other devices to a

minimum.

•Away from electrical devices that are potential sources of

interference. Equipment that might cause interference includes ceiling

fans, home security systems, microwaves, PCs, the base of a cordless

phone, or a 2.4-GHz cordless phone.

• Away from any large metal surfaces, such as a solid metal door or

aluminum studs. Large expanses of other materials such as glass,

insulated walls, fish tanks, mirrors, brick, and concrete can also affect

your wireless signal.

Installation and Quick Setup Guide

2.1 Preparation

Before connecting Ethernet cables,please verify the following items:

2.2 Physical installation

1. Connect one end of the included power adapter to the device and plug

the other end into a wall outlet nearby.(Using a power adapter with a

Item

Description

Wireless Router

Used with the provided power supply

Installed with IE8 or other better web browsers.

Ethenet Cable

Used for linking the PC to the router

Broadband Service

Provided by ISP

Internet Connection

Setup

◇If you connect to the Internet using a

broadband connect ion that requ ires a

username and a password provided by your

ISP, please select PPPoE;

◇I f y o u r I S P p r o v i d e s a l l t h e n e e d e d

information: IP address, subnet mask,

gateway address, and DNS address(es),

please select Static IP;

◇If you can access Internet as soon as your

computer directly connects to an Internet-

enabled ADSL/Cable modem, please select

DHCP;

◇If your ISP uses a PPTP connection, please

select PPTP;

◇If your ISP uses an L2TP connection, please

select L2TP..

different voltage rating than the one included with the

device will cause damage to the device.)

2. Connect one of the LAN ports on the Device to the NIC port on your PC

using an Ethernet cable.

3. Connect the Ethernet cable from Internet side to the WAN port on the

Device.

4. When connected, log in to Web manager to set up Internet connection.

2.3 Internet Connection Setup

Before you start the setup process, get your ISP information and make

sure the computers and devices in the network have the settings

described here.

2.3.1 Use Standard TCP/IP Properties for DHCP

If you set up your computer to use a static IP address, change the

settings so that it uses Dynamic Host Configuration Protocol (DHCP). If

you are not clear about this configuration, please refer to Appendix 1:

How to Configure IP.

2.3.2 Log in to Web Manager

1. 1). Launch a web browser; in the address bar, input 192.168.0.1 and

press Enter;#

2). Enter admin in the password field on the appearing login window

and then click OK.

2. Now you may access the device’s home page for quickly setting up

Internet connection and wireless security.

2.3.3 Quick Internet Connection Setup

Two common Internet connection types are available on the home page:

PPPoE and DHCP.

DHCP: Select DHCP (Dynamic IP) if you can access Internet as soon as

your computer directly connects to an Internet-enabled ADSL/Cable

modem; configure a security key (8-63 characters) to secure your wireless

network and then click OK.

2.3.4 Verify Internet Connection Settings

System automatically skips to the status page when you finish all needed

settings on the home page. Here you can see the system status and WAN

connection status of the device.

1. If you find "Connected" and a WAN IP address displayed there (as

shown below), you have got a wired internet access now.

2. If connection status displays "Disconnected" and there is no WAN IP

address displayed (as seen below), connection between the Internet-

enabled modem and your device may have failed. Please double check

Altri manuali per F303

Indice

Manuali Router wireless popolari di altre marche

Milesight

Milesight UG67 Manuale utente

Airlogic

Airlogic AirSync Class 1 Manuale del proprietario

Samsung

Samsung WCH730B Manuale utente

TELEFONICA

TELEFONICA USB Adapter Manuale utente

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuale utente

Askey

Askey RAC2V1K Manuale utente

Alloy

Alloy WLF2454AP-S Manuale utente

TP-Link

TP-Link TL-WR542G Manuale utente

NETGEAR

NETGEAR WNR2000v4 Manuale utente

Hama

Hama 53120 Manuale utente

Intellinet

Intellinet 524582 Manuale utente

Asus

Asus RT-N10P Manuale utente

D-Link

D-Link DIR-506L Manuale utente

Sapido

Sapido GR297n Manuale utente

Asus

Asus DSL-N55U Manuale utente

AMTC

AMTC WR7502 Manuale utente

Compaq

Compaq CP-2W - iPAQ Connection Point Manuale utente

SMC Networks

SMC Networks WBR14-N2 FICHE Manuale utente