Teradek CUBE Manuale utente
Introduction
Thank you for purchasing Cube –the world’s first camera-top streaming HD video solution. The Cube
Encoder streams HD video over any IP network. Wireless-equipped Cubes can connect directly to
laptops, Cube Decoders, or mobile devices, or join an existing wireless network to stream over a LAN or
WAN. USB-equipped Cubes are also capable of streaming using select 4G capable modems. Cube
features native integration with Livestream.com for turn-key live Internet streaming and content
distribution. Use this reference to help get the most out of your Cube.
1. Three key steps to get started with your Cube:
1. Connect and power your device (page 5)
2. Connect Cube to your network (page 8)
3. Pick your streaming application (page 10)
Support Resources
In addition to this Reference Guide, there are a number of resources available for more
information on Cube’s features and operation. Included in the box is a USB drive that
includes the full user manual, training videos, and our TeraCentral app. For online
information, see the following:
oSupport forum: http://forum.teradek.com - Contains tips, information, and all the latest available
firmware and software updates.
oTraining videos: http://cube.teradek.com/training.html
If you are unable to find what you are looking for online, please contact Teradek’s support staff:
E-mail: support@teradek.com | Phone: (888) 941-2111 ext. 2 (available M-F 9AM-6PM PST)
Disclaimer
This manual is intended for user information only. Every effort has been made to ensure that the contents within are
accurate at the time of printing, and that updates are made in a timely manner. Teradek cannot be held responsible
for inaccuracies, typographical errors, or out-of-date information contained within this manual.
Warning
Teradek Cube products contain no user serviceable parts. Disassembly, modification, or removal of any of the
device’s components may void your warranty. For up-to-date warranty terms, please visit
http://cube.teradek.com/warranty.html .
Table of Contents
Introduction .................................................................................................................................................. 2
Support Resources ........................................................................................................................................ 2
Disclaimer...................................................................................................................................................... 2
Warning......................................................................................................................................................... 2
Connect and Power Your Device................................................................................................................... 5
1. Getting started:............................................................................................................................... 5
2. Physical connections:.................................................................................................................... 5
Connect Cube to Your Network .................................................................................................................... 8
1. Ad Hoc instructions........................................................................................................................ 8
2. Infrastructure instructions.............................................................................................................. 8
Connect to Cube using TeraCentral .............................................................................................................. 9
Encoder –Pick Your Application .................................................................................................................10
1. Local monitoring with computers and/or decoders .................................................................10
2. Local monitoring with iOS devices using OPlayer HD............................................................11
3. Internet streaming using Livestream.........................................................................................12
Decoder....................................................................................................................................................... 14
1. Changing output format............................................................................................................... 14
2. Pairing............................................................................................................................................ 14
3. Switching between available streams....................................................................................... 15
4. Manual configuration ................................................................................................................... 15
Stream Modes............................................................................................................................................. 15
1. RTP/RTSP.....................................................................................................................................15
2. Secondary Quickview Stream.................................................................................................... 16
3. HTTP Live......................................................................................................................................16
4. Live Internet Streaming............................................................................................................... 17
Encoder Controls......................................................................................................................................... 17
1. Options (in order of display): ...................................................................................................... 18
Network Settings.........................................................................................................................................19
1. Network Configuration................................................................................................................. 19
2. Network Services .........................................................................................................................21
Configuration pages....................................................................................................................................21
1. Dashboard..................................................................................................................................... 21
2. Video Setup................................................................................................................................... 22
3. System........................................................................................................................................... 25
4. Info.................................................................................................................................................. 28
Advanced and/or activatable applications ................................................................................................. 29
1. RTSP announce........................................................................................................................... 29
2. RTP push....................................................................................................................................... 29
3. UDP multicast............................................................................................................................... 30
4. Transport stream.......................................................................................................................... 31
5. Proxy Recording........................................................................................................................... 33
Troubleshooting.....................................................................................................................................36
Connect and Power Your Device
1. Getting started:
1. To power your Cube, connect the included AC adapter (or accessory power cable, sold
separately) to Cube via the 4 pin LEMO connector marked ‘6-28 DC Input’(b). Cube begins to
boot as soon as power is connected. NOTE: The ENC/DEC LED blinks to indicate Cube is
booting. This process takes approximately 1 ½ minutes.
2. Connect your video source to Cube via BNC cable (e)(SD/HD-SDI 1xx models, Composite 5xx
models) or HDMI cable (2xx models).
3. Attach the antenna (a)(if applicable) via the threaded RP-SMA connector.
4. Use the included hot shoe mount and/or ¼” screw (f) to mount Cube to your camera, tripod
mount, or other accessory mount, if desired.
5. Once Cube has booted, verify that the ‘ENC’ and ‘VID’ LEDs are green, indicating video is
successfully detected (c).
For more information about Cube’s physical connections and power options, please see the following
sections.
2. Physical connections:
Left: Cube 1xx SDI encoder, Right: Cube 2xx HDMI encoder
Left: Cube 3xx SDI decoder, Right: Cube 4xx HDMI decoder
1. Audio/Video Input/Output:
1.1. Video intput: SD/HD-SDI (Cube 1xx Series), HDMI (Cube 2xx Series), PAL/NTSC
Composite (Cube 5xx Series)
1.2. Video output: SD/HD-SDI (Cube 3xx Series), HDMI (Cube 4xx Series)
1.3. Audio output: 2Ch. Embedded HDMI/SDI audio, Line in via 1/8” stereo TRS, Mic in via 1/8”
stereo jack* (Cube 150 and 250 models only)
1.4. Audio output: 2Ch. Embedded HDMI/SDI audio, Line out via 1/8” stereo TRS
2. Power:
2.1. LEMO pin configuration:
1. DC +
2. No Connect
3. No Connect
4. DC -
2.2. Cube accepts 6-28 volts DC input via a 4 pin LEMO connector.
2.3. An AC adapter is included with Cube. Teradek also offers a number of power accessory
cables and battery plates to integrate with your existing power equipment. Accessories are
available online at http://store.teradek.com or through your local Teradek dealer.
3. Ethernet, USB, antenna
Left to right: Cube x00, x20, x50 back connections
3.1. 10/100 Ethernet port –Use this for connecting to networks via Ethernet.
3.2. USB port (if applicable) –Used for connecting to Wireless broadband USB modem.
3.3. Go Live! Button –Used for various tasks including broadcast start and stop, pairing, and
factory resets. Please See Description of Button and Standard LED (page 7) for more
information.
3.4. Antenna (if applicable) –RP-SMA connector used to attach antenna (included). NOTE: this
is labeled 2.4/5GHz on both single and dual-band equipped Cubes.
Male 0B.304
LEMO on Cable
Female 0B.304
LEMO in Cube
4.
3.
1.
2.
1.
2.
4.
3.
3. Description of Button and Standard LED Operation
1. LED functions
1.1. USB/PWR (model dependent):
1.1.1.PWR –Green is on
1.1.2.USB –USB modem status. Off, nothing connected. Green, USB modem connected.
Orange, USB modem connection in progress. Red, USB modem connection failed
1.2. WiFi
1.2.1.Cube 100/200 –USB modem status (see above).
1.2.2.Cube 120/150, 220/250, 320/350, 420/450 –Wireless status. Off, wireless disabled.
Red, wireless disconnected. Green, wireless associated/connected.
1.3. ENC/DEC –Green, encoding/decoding. Orange, no video detected. Red, codec is restarting
or recording is in progress.
1.4. VID –Off, no video sync. Green, video sync. Orange, resolution mismatch. Red, resolution
not supported.
2. Button operation –Hold down the reset/’Go Live’ button for the indicated times to use the
following functions:
2.1. 1-3 seconds (Livestream/RTSP Announce/RTMP mode only): Broadcast start or stop. ENC
LED blinks green rapidly, and then indicates broadcast status. See Stream Modes (page
15) for more information.
2.2. 1-4 seconds (Other stream modes), 7-9 seconds (Livestream, etc.): Pairing –ENC/DEC and
WiFi LEDs blink green rapidly. See the Decoder section, page 14 for more information.
2.3. 10-15 seconds: Network reset –WiFi LED cycles red, amber, green. See XXXXXXX (insert
reference) for more information.
2.4. 20+ seconds: Full factory reset –ENC and WiFi LEDs cycle red, amber, green. See
XXXXXXX (insert reference) for more information.
2.5. NOTE: when your stream type is set to ‘Live Internet Streaming or ‘RTSP Announce,’ the
button operation changes as follows:
2.5.1.1-3 seconds: Broadcast start or stop. ENC LED blinks green rapidly, and then indicates
broadcast status. See Stream Modes (page 15) for more information.
2.5.2.7-9 seconds: Pairing –see above.
Connect Cube to Your Network
Cube allows you to connect multiple ways. The simplest is to connect Cube to one other device (Ad Hoc
mode), or you can add Cube to an existing network (Infrastructure mode). Find brief descriptions of these
modes below.
In Ad Hoc mode, Cube will create and advertise its own network name (SSID). Your computer,
decoder, or mobile device connects directly to Cube, with no additional network equipment
required.
When using Infrastructure mode, Cube must be configured to join an existing wireless network,
or connected to a network switch via Ethernet. Infrastructure mode allows Cube to communicate
with all devices on your network, and is recommended for streaming to the Internet. Wireless
range is typically improved when Cube is connected via a wireless access point.
1. Ad Hoc instructions
1.1. Connect video and power to your Cube Encoder (see Connect and Power Your Device, page
5).
1.2. On your computer, open your wireless networking utility.
1.3. Choose your Cube from the list of WiFi devices in your area and connect to that network.
2. Infrastructure instructions
2.1. Connect video and power to your Cube Encoder (see Connect and Power Your Device, page
5).
2.2. Connect Cube to your computer via Ethernet.
2.3. Launch TeraCentral (included on the USB drive), and click the ‘Configure Settings’ button next to
your Cube’s listing. Your browser will open to Cube’s setup wizard.
2.4. Click ‘Next’ and then ‘Configure Wireless Interface.’
2.5. Select ‘Infrastructure Mode,’ wait for Cube to scan for available wireless networks, and select
your access point’s SSID.
2.6. Enter the network password, if applicable. Click OK.
2.7. Click ‘Apply New Network Settings,’ Cube will join your network.
2.8. Verify that the WiFi LED turns green after applying. You can now disconnect the ethernet cable
and connect your computer to the chosen wireless network.
Connect to Cube using TeraCentral
1. Launch TeraCentral from the included USB stick, or install TeraCentral on your computer and run the
application.
2. In TeraCentral, click your video stream’s Launch button. The video will begin playing in VLC. You can
also launch Cube’s menu system from TeraCentral by clicking the ‘Configure settings’ button next to
your Cube’s listing.
3. Refer to the following sections for other streaming applications.
Encoder –Pick Your Application
Cube can be used for a variety of different applications –local monitoring with a computer/decoder, local
monitoring with iOS devices, or Internet streaming with Livestream. For information on other advanced or
activatable features (refer to later sections). Cube’s username is ‘admin’ and the default password is
‘admin.’ Changing your password is strongly recommended; see System (Page 25) for more information.
1. Local monitoring with computers and/or decoders
Cube’s default streaming type is RTP. This is used by many widely available video players for network
video streaming.
1.1. To view your video stream on a PC or Mac with TeraCentral installed, simply open TeraCentral
and click the ‘Launch Video’button. Refer to the Encoder Controls (page 17) section for
information about the controls you have over the video stream. If using a decoder, please skip to
the Decoder section (page 14).
Altri manuali per CUBE
2
Indice
Altri manuali Teradek Convertitore multimediale
Teradek
Teradek Brik Manuale utente
Teradek
Teradek CUBE Manuale utente
Teradek
Teradek VidiU Manuale utente
Teradek
Teradek beam Manuale utente
Teradek
Teradek Cube 605 Manuale utente
Teradek
Teradek CUBE Series Manuale utente
Teradek
Teradek Slice Manuale utente
Teradek
Teradek Slice Manuale utente
Teradek
Teradek CUBE Series Manuale utente
Teradek
Teradek Vidiu X Manuale utente
