Terex 43032 Manuale utente
Operator's Manual
Serial Number Range
GS-3384
from
43032
GS-3390
from
47263
GS-4390
from
47263
GS-5390
from
47263
North America
South America
Asia
AUS
Australia
with
Maintenance
Information
ourth
Edition
ourth
Printing
Part No. 133564
Operator's Manual Fourth Edition • Fourth Printing
Important
Read, understand and obey these safety rules and
operating instructions before operating this
machine. Only trained and authorized personnel
shall be permitted to operate this machine. his
manual should be considered a permanent part of
your machine and should remain with the machine
at all times. If you have any questions, contact us.
Contact Us:
Internet: www.genielift.com
E-mail: [email protected]
Contents
Introduction..................................................................1
Symbol and Hazard Pictorials Definitions..............4
General Safety............................................................6
Personal Safety........................................................10
Work Area Safety......................................................11
Legend.......................................................................19
Controls......................................................................20
Inspections................................................................25
Operating Instructions..............................................38
ransport and Lifting Instructions...........................44
Maintenance..............................................................47
Specifications............................................................51
Copyright © 2002 by erex Corporation
Fourth Edition: Fourth Printing, November 2015
Genie is a registered trademark of erex South Dakota, Inc.
in the U.S.A. and many other countries. “GS” is a trademark
of erex South Dakota, Inc.
hese machines comply with
ANSI/SIA 92.6
CAN B.354.4
GS-3384 • GS-3390• GS-4390• GS-5390 Part No. 133564
Fourth Edition • Fourth Printing
Owners, Users and Operators:
hank you for choosing our machine for your
application. Our number one priority is user safety,
which is best achieved by our joint efforts. We feel
that you make a major contribution to safety if you,
as the equipment users and operators:
1 Comply with employer, job site and
governmental rules.
2 Read, understand and follow the instructions
in this and other manuals supplied with this
machine.
3 Use good safe work practices in
a commonsense way.
4 Only ave trained/certified operators,
directed by informed and knowledgeable
supervision, running the machine.
Operator's Manual
Introduction
Danger
Failure to obey the instructions and
safety rules in this manual will result
in death or serious injury.
Do Not Operate Unless:
You learn and practice the principles of safe
machine operation contained in this operator’s
manual.
1 Avoid azardous situations.
Know and understand t e safety rules
before going on to t e next section.
2 Always perform a pre-operation inspection.
3 Always perform function tests prior to use.
4 Inspect the workplace.
5 Only use the machine as it was intended.
You read, understand and obey the
manufacturer’s instructions and safety
rules—safety and operator’s manuals and
machine decals.
You read, understand and obey employer’s
safety rules and worksite regulations.
You read, understand and obey all applicable
governmental regulations.
You are properly trained to safely operate the
machine.
Part No. 133564 GS-3384 • GS-3390• GS-4390• GS-5390 1
Operator's Manual
Introduction
Hazard Classification
Decals on this machine use symbols, color
coding and signal words to identify the following:
Safety alert symbol—used to alert
you to potential personal injury
hazards. Obey all safety
messages that follow this symbol
to avoid possible injury or death.
Indicates a hazardous situation
DANGER
which, if not avoided, will result in
death or serious injury.
Indicates a hazardous situation
WARNING
which, if not avoided, could result
in death or serious injury.
Indicates a hazardous situation
CAUTION
which, if not avoided, could result
in minor or moderate injury.
Indicates a property damage
NOTICE
message.
Fourth Edition • Fourth Printing
Intended Use
his machine is intended to be used only to lift
personnel, along with their tools and materials
to an aerial work site.
2 GS-3384 • GS-3390• GS-4390• GS-5390 Part No. 133564
Fourth Edition • Fourth Printing Operator's Manual
Introduction
Safety Sign Maintenance
Replace any missing or damaged safety signs.
Keep operator safety in mind at all times. Use mild
soap and water to clean safety signs. Do not use
solvent-based cleaners because they may damage
the safety sign material.
Part No. 133564 GS-3384 • GS-3390• GS-4390• GS-5390 3
Operator's Manual Fourth Edition • Fourth Printing
Symbol and Hazard Pictorials Definitions
Read the operator’s Read the service Crush hazard Crush hazard
Collision hazard
manual manual
ip-over hazard ip-over hazard ip-over hazard ip-over hazard
Electrocution hazard
Electrocution hazard Explosion hazard Fire hazard Burn hazard
Skin injection hazard
Engage safety arm Keep away from Keep clear of Move machine to
Close chassis tray
moving parts outriggers and tires level ground
Lower the platform Do not set up where it Maintain required Only trained Use a piece of
cannot be leveled clearance maintenance
cardboard or paper to
with outriggers personnel should search for leaks
access
compartments
4 GS-3384 • GS-3390• GS-4390• GS-5390 Part No. 133564
Fourth Edition • Fourth Printing Operator's Manual
Symbol and Hazard Pictorials Definitions
Chock the wheels Release brakes iedown Lanyard attachment No smoking
point
Wheel load ransport diagram Side force Wind speed
Outrigger load
Voltage rating for Pressure rating for air Maximum Crushing hazard Hold rail while lowering
power to platform line to platform capacity
Collision hazard
Chock the wheels
Part No. 133564 GS-3384 • GS-3390• GS-4390• GS-5390 5
Operator's Manual Fourth Edition • Fourth Printing
General Safety
6 GS-3384 • GS-3390• GS-4390• GS-5390 Part No. 133564
Fourth Edition • Fourth Printing Operator's Manual
General Safety
Part No. 133564 GS-3384 • GS-3390• GS-4390• GS-5390 7
Questo manuale è adatto per i seguenti modelli
5
Indice
Altri manuali Terex Sistema di sollevamento
Terex
Terex GS32MT-101 Manuale utente
Terex
Terex Genie GS -1530/32 Manuale utente
Terex
Terex Genie GS-1432m Manuale utente
Terex
Terex SX135H-101 Manuale di installazione e funzionamento
Terex
Terex Genie Z-34/22 IC Manuale utente
Terex
Terex Genie GTH-4014 AU Manuale utente
Terex
Terex SX135D-101 Manuale utente
Terex
Terex Genie GS-1432m Manuale utente
Terex
Terex MAC 25-4 SL Manuale utente
Terex
Terex Genie SX-105 XC Manuale di installazione e funzionamento
Terex
Terex Genie GS-1932 XH Manuale utente
Terex
Terex Genie Lift Guard S-60 Manuale utente
Terex
Terex Genie S-40XC Manuale di installazione e funzionamento
Terex
Terex Genie Z-60 DC Manuale utente
Terex
Terex Genie Z-51/30J Manuale di installazione e funzionamento
Terex
Terex Genie IWP Series Manuale utente
Terex
Terex Genie GS-1432m Manuale di installazione e funzionamento
Terex
Terex Genie GS84D-401 Manuale di installazione e funzionamento
Terex
Terex Genie TX-34/20 Manuale utente
Terex
Terex Genie SX-135 XC Manuale utente
Manuali Sistema di sollevamento popolari di altre marche
Genie
Genie Z-60/34 Manuale utente
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuale utente
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuale utente
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuale di programmazione
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuale di programmazione
