4.4 Min/Max Mode
Notes:
- If you have multiple remote temperature sensors, select the Channel you
wish to view the min/max data before you enter the min/max mode.
- Resetting the minimum and maximum values resets all three channels at the
same time for multi-channel operation.
1. Minimum Values. While in Normal Mode, press the MIN/MAX
button to enter the min/max mode. The minimum water
temperature and indoor temperature will be displayed. Press the
CLEAR button (on the top of the display) to clear the minimum
values to the current measured values.
2. Maximum Values. Press the MIN/MAX button again, and the
maximum water temperature and indoor temperature will be
displayed. Press the CLEAR button (on the top of the display) to
clear the maximum values to the current measured values.
3. Press the MIN/MAX button again to exit the min/max mode.
4.5 °C/°F Units of Measure
To toggle between °C/°F temperature units of measure on the display, press
the C/F button on the back of the display.
4.6 Multi-Channel Operation
The station supports up to 3 remote thermometers (one is included).
4.6.1 Multi-channel Sensor Initialization
Place the multiple remote sensors about 10 feet from the console. Power up
the sensors and console in the following order:
1. Power up the first remote thermometer and set the channel number dip
switches, as described in Section 2.2. Verify the display reads
Channel 1.
2. Power up the second remote thermometer and set the channel number
dip switches, as described in Section 2.2. Verify the display reads
Channel 2.
3. Power up the third remote thermometer (if available) and set the
channel number dip switches, as described in Section 2.2. Verify the
display reads Channel 3.
