Large RFID Cabinet User Guide, REV01, 08/17/2023 10
4. GETTING STARTED
4.1 Unpacking the Device
Before unpackaging the device, inspect for any damage that may have occurred during transit. If any
damage is present, please contact Terso Solutions Technical Support (reference section 7).
Please follow the guidelines below to successfully unpack your device:
•Ensure all wheels are in solid contact with the ground. Lock the front wheels by pushing the
wheel locks downward into locked position.
•Remove all packaging, including straps. Gently position the device in place on the ground.
•Remove accessories from inside the device. A power cable and Ethernet cable should be
included. Other items may also be included such as other cables and drawers, or other device
specific items.
4.2 Transporting the Device
When transporting the device to the designated installation location or relocating the device:
1. Unlock the two front wheels by pushing the wheel locks upwards into the unlocked position.
2. Carefully roll the cabinet forward by firmly pushing the handle on either side of the device.
3. Carefully roll the cabinet into position leaving at least a 3-inch (in.) gap between the cabinet and
the wall.
4. Relock the front wheels by pushing the wheel locks in the downward locked position.
Do not push or roll the device using anything other than the handles on either side of
the device. Failing to do this may cause the device to tip leading to injury to the user or
damage to the device.
