TESTO 881 Guida di riferimento

Altri manuali per 881

1

Altri manuali TESTO Attrezzature da laboratorio

Manuali Attrezzature da laboratorio popolari di altre marche

Qiagen

Qiagen DML 3000 Manuale utente

Queensgate

Queensgate NANOSCAN OP400 Manuale di programmazione

Conviron

Conviron GEN1000-GE Manuale utente

Parr Instrument

Parr Instrument 4560 Manuale di istruzioni

IKA

IKA IC control Manuale utente

Integra

Integra DOSE IT Manuale utente

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuale utente

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuale utente

NI

NI PXI-5422 Manuale

Collomix

Collomix Aqix Manuale utente

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente

Ocean Insight

Ocean Insight FLAME-NIR+ Manuale utente

Parker

Parker ALIGN-MG-NA Manuale utente

BD

BD 644787 Manuale utente

DENTAURUM

DENTAURUM Compact Megaplus Manuale utente

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuale utente

VWR

VWR SAS Super IAQ Manuale utente

illumina

illumina MiSeqDx Manuale utente

Brief instructions en

testo 881 · Thermal imager

Contact

GREAT BRITAIN / IRELAND

Testo Ltd.

Alton, Hampshire GU34 2QJ

Tel. (14 20) 54 44 33, Fax (14 20) 54 44

E-mail: [email protected]

USA

Testo Inc.

Flanders, NJ. 07836

Tel. (973) 2 52 17 20, Fax (973) 2 52 17 29

E-mail: [email protected]

AUSTRALIA

Testo Pty Ltd

Croydon South VIC 3136

Tel. (3) 98 00 46 77, Fax (3) 98 00 46 99

E-mail: [email protected]

The most up-to-date address details of our subsidiaries and

agencies can be found in Internet at: www.testo.com

Changing assignment of the quick

select buttons

Change the left or right quick select button:

1Call up: Move Joystick to the left or right.

2Navigate: Move Joystick up / down.

3Confirm: Press [OK] .

or

Cancel: Press [Esc] .

Getting to know the quick select

buttons

Using the quick select buttons, the set functions are

called up directly. Factory settings:

Left quick select button : Adjust scaling.

Right quick select button :

testo 881-2: Change colour palette.

testo 881-1/3: Select image type.

Building inspection

Electrical maintenance work

Mechanical maintenance









Image type

Light

Palette

Emissivity...

Scale...

Adjustment

Scale… Image type

0970 8809 en 01 V01.00 en-US

Commissioning

1Push the rechargeable battery all the way

into the rechargeable battery slot until this is flush

with the bottom of the handle.

- The thermal imager starts automatically.

2Remove protective film from the display .

- Instrument language (Language) and temperature

unit (Unit) can be set:

3Move Joystick up / down to select the desired

option.

4Press [OK] .

5Move Joystick up / down to change the setting.

6Press [OK].

7Press [Apply] function key to apply the

settings.

8Press [] to switch off the thermal imager.

9Connect power supply ().

10 Completely charge battery (3 hours).

11 Insert Memory card in the card slot (SD) .

- The camera is now ready for operation.

Recording the image

1Freeze image: Press trigger button once.

2Save image: Press trigger button again.

or

Discard image: Press [Esc] .

Getting to know the menu

1Open menu: Press [OK] .

2Navigate: Move Joystick up / down.

3Open submenu (only for menu points marked

with ): Move joystick to the right.

4Call up a function: Press [OK].

or

Exit menu: Press [Esc] .







Focusing the picture

With motor focus (testo 881-3 only)

1Switch on motor focus: Slide motor focus

switch towards the display (position ).

2Focus: Move motor focus control .

Manual

testo 881-3 only: Caution! Manually turning while

motor focus is switched on damages the auto

mechanism.

Switch off motor focus: Slide motor focus

switch towards the lens (position: ).

Turn lens by hand.











Apply

Switching on / off

Remove protection cap from the lens.

Switch on: Press [ ] .

- The measurement view is opened after the warm-

up period.

- The thermal imager performs an automatic

zeroing approx. every 60 sec. This can be

recognized by a “click”. The image is frozen

briefly when this occurs.

Switch off: Press [ ] again.













Measurement

Image gallery

Scale...

Display...

Emissivity...

Palette

Audio…

Configuration



