1.
INTRODUCTION........................................................................................................................1
2.
GENERAL CHARACTERISTICS...............................................................................................1
2.1.
Electrical characteristics of the displays............................................................................. 1
2.1.1.
Electrical characteristics of the DN-107/NE displays..............................................1
2.2.
Dimensions and fixing of the displays ................................................................................ 2
2.2.1.
Dimensions of the displays DN-107 /3......................................................................... 2
2.2.2.
DN-119 weight and power consumption...................................................................... 2
2.2.3.
Fixing of the displays DN-107...................................................................................... 3
3.
INSTALLATION..........................................................................................................................1
3.1.
Power supply ...................................................................................................................... 1
3.2.
Connecting to the Ethernet line .......................................................................................... 2
4.
OPERATION ..............................................................................................................................1
4.1.
Initial start-up ...................................................................................................................... 1
4.2.
Parameter programming..................................................................................................... 1
4.2.1.
Enter to modify parameters.......................................................................................... 2
4.2.2.
Exit modify parameters ................................................................................................ 2
4.2.3.
Function of each parameter......................................................................................... 2
4.3.
Protocols............................................................................................................................. 5
4.3.1.
TCP/IP Protocol ........................................................................................................... 5
4.3.2.
UDP Protocol ............................................................................................................... 5
4.3.3.
Modbus/TCP Protocol.................................................................................................. 6
4.3.4.
Valid Characters........................................................................................................... 8
4.4.
IP Address ........................................................................................................................ 10
4.5.
Modifying the port settings................................................................................................ 10
4.5.1.
Configure to use the UDP/IP protocol........................................................................ 11
4.6.
Colour configuration.......................................................................................................... 12
4.6.1.
Parameters to define the internal bit r1...................................................................... 12
4.6.2.
Parameters to define the internal bit r2...................................................................... 12
4.6.3.
Parameters to define the colour................................................................................. 13
4.6.4.
Work with only one colour.......................................................................................... 13
Revision history..............................................................................................................................1
