Texas Instruments LaunchPad CC1312PSIP Manuale utente

™

Meet the

CC1312PSIP

LaunchPad

Development Kit

Connect your LaunchPad to a computer

and visit dev.ti.com

Part Number: LP-EM-CC1312PSIP

BoosterPack Ecosystem

SimpleLink ULP Sense

BoosterPack

- Flow meter measurements

- Ultra low power accelerometer

- Two cap touch buttons

- Analog Light Sensor

- Reed switch

- 0-200kΩpotentiometer

See them all @ ti.com/boosterpacks

Software Tools SmartRF Studio

A powerful application to

evaluate radio performance.

Professional Software tools

LaunchPads are supported by

professional IDEs that

provide industrial-grade

features and full debug-

capability. Set breakpoints,

watch variables, profile code,

inspect memory and more.

Sharp 128x128 Memory

LCD and microSD card

BoosterPack

- 1.28 128 x 128 pixel LCD

(LS013B7DH03)

- microSD card slot

- DCDC 3V to 5V converter

- Ultra-low-power operation

2023 Texas Instruments Incorporated. The platform bar, LaunchPad, EnergyTrace and Code Composer Studio

are trademarks of Texas Instruments.

All other trademarks are the property of their respective owners.

The BoosterPack™ connector

The pinout to connect BoosterPack accessories (available separately) are shown below.

www.ti.com/ccs

Code Composer Studio

IDE

XDS110 EnergyTrace™ Technology

The LP-EM-CC1312PSIP is compatible with the EnergyTrace technology.

EnergyTrace implements a new method for measuring MCU current consumption. It uses

a DC-DC solution to measure the time density of charge pulses, allowing accuracy on

ultra low power measurements. Its high dynamic range (700 nA to 400 mA) and fast

sampling rate (256 kSPS) captures the complete operational profile of the wireless MCU.

Find more information at

ti.com/EnergyTrace

EnergyTrace Profile

EnergyTrace Profile runtime and energy data for low power modes along with each

function run during Active Mode.

Graphical Power Data in Code Composer Studio

These two tabs of the EnergyTrace Technology window show a graph over time of

power and energy.

UART (RXD, TXD), Reset (LP_RST) and JTAG (TMS, TCK, TDO and TDI) are also present in the

LP-EM Debug Connector. Power (GND, 3V3 and 5V) is also provided.

SPAZ037

GND

DIO19

DIO11

LP_RST

DIO9

DIO8

DIO15

DIO14

DIO7

DIO6

DIO20

DIO4

SPI_CS

SPI_MOSI

SPI_MISO

CTS

SWO

BP_RST*

TMS

TCK

TDO

TDI

BTN_2

BTN_1

RLED

GLED

Flash_CS

3V3

DIO23

GND

DIO22

DIO24

DIO10

SPI_CLK

DIO31

DIO21

I2C_SCL

DIO5

I2C_SDA

DIO25

DIO26

DIO27

DIO28

DIO29

DIO30

DIO1

DIO2

Analog

RXD

TXD

DIO12

DIO13

A closer look at your new

LaunchPad Development Kit

Featured microcontroller: CC1312PSIP

This LaunchPad is great for...

- Battery-operated wireless applications operating in the Sub-1GHz ISM RF bands (868MHz and 915MHz)

- Add RF capabilities to your product using one of the supported protocols: IEEE 802.15.4g, Wi-SUN®,

Wireless M-Bus, MIOTY®and proprietary protocols

What comes in the box?

LP-EM-CC1312PSIP

LaunchPad

CC1312PSIP Microcontroller

- 48 MHz CPU

- 352kB Flash, 80 kB RAM

- Programmable radio supporting

various protocols and up to +20 dBm

at 868MHz and 915MHz

- Low power consumption

QSG

This Quick

Start Guide

10-pin

Debug Cable

2-wire

Power Cable

CC1312PSIP

{

- Four 32-bit or eight x 16-bit timers

- ADC with 8 channel, 12 bits and 200 ksamples/s

- DAC with 8 bits

- Serial communications: UART, SPI, I2C

- Two comparators

Separate LaunchPad

Hardware setup

LP-XDS110 or LP-XDS110ET

USB to the host

computer

USB to the host

computer

10-pin Debug Connector

Allows using an external JTAG Debug

Probe to debug/program the device

CC1312PSIP

Wireless Microcontroller

LP-EM-CC1312PSIP Overview

Remove all jumpers,

except GND and 3V3

Jumper on the position

XDS110 Power

Option 2: Using the 10-pin debug connector

LP-EM Debug Connector

Together with a LP-XDS110 or

LP-XDS110ET, allows:

- Debugging and programming

- Communicate to the host via UART

- Powering the microcontroller

20-pin BoosterPack

plug-in module connector

(J1, J2, J3 & J4)

Button/Switch

BTN-1 (DIO15)

Button/Switch

BTN-2 (DIO14)

User LEDs

Red (DIO6)

Green (DIO7)

{

Antenna

LP-EM-CC1312PSIP

What do you need?

To use your new LaunchPad, you need to connect an external Debug Probe to either the 20-pin

LP-EM Debug connector on the edge of the board or to the 10-pin Debug connector and supply

power separately.

Option 1: Using the LP-EM Debug Connector

This is the easiest way to setup the hardware. It requires either an LP-XDS110 or

2-wire Power Cable

10-pin Debug Cable

LP-EM-CC1312PSIP

For additional details, consult dev.ti.com/LP-EM-CC1312PSIP

IMPORTANT NOTICE AND DISCLAIMER

TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATA SHEETS), DESIGN RESOURCES (INCLUDING REFERENCE

DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”

AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY

IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD

PARTY INTELLECTUAL PROPERTY RIGHTS.

These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate

TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable

standards, and any other safety, security, regulatory or other requirements.

These resources are subject to change without notice. TI grants you permission to use these resources only for development of an

application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license

is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you

will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these

resources.

TI’s products are provided subject to TI’s Terms of Sale or other applicable terms available either on ti.com or provided in conjunction with

such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for

TI products.

TI objects to and rejects any additional or different terms you may have proposed. IMPORTANT NOTICE

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265

Questo manuale è adatto per i seguenti modelli

Altri manuali Texas Instruments Microcontrollore

Texas Instruments

Texas Instruments DA8xx EVM PSP Manuale utente

Texas Instruments

Texas Instruments TMS320F280039C Manuale utente

Texas Instruments

Texas Instruments Chipcon Products CC1110DK Manuale utente

Texas Instruments

Texas Instruments CC11 L Series Manuale utente

Texas Instruments

Texas Instruments SimpleLink MSP432E4 Manuale del prodotto

Texas Instruments

Texas Instruments C2000 Piccolo LaunchPad Guida all'installazione

Texas Instruments

Texas Instruments MSP430F6723A Manuale utente

Texas Instruments

Texas Instruments LaunchPad LP-EM-CC2340R5 Manuale utente

Texas Instruments

Texas Instruments AM5729 Manuale utente

Texas Instruments

Texas Instruments MSPM0G310 Series Manuale utente

Texas Instruments

Texas Instruments TMS320F28376D Manuale utente

Texas Instruments

Texas Instruments CC3220 Manuale utente

Texas Instruments

Texas Instruments LaunchPad CC2650 Manuale utente

Texas Instruments

Texas Instruments MSP430F663x Manuale utente

Texas Instruments

Texas Instruments Chipcon CC2420DK Manuale di programmazione

Texas Instruments

Texas Instruments CC1110 Manuale utente

Texas Instruments

Texas Instruments LaunchPad CC1354P10-6 Manuale utente

Texas Instruments

Texas Instruments Hercules TMS570LS04 Series Manuale utente

Texas Instruments

Texas Instruments SWRU351 Manuale utente

Texas Instruments

Texas Instruments CC2531 Manuale di installazione

Texas Instruments

Texas Instruments CC1125 Manuale utente

Texas Instruments

Texas Instruments TAS6584-Q1 EVM Manuale utente

Texas Instruments

Texas Instruments CC3220 Manuale utente

Texas Instruments

Texas Instruments MSP430F67621 Manuale utente

Manuali Microcontrollore popolari di altre marche

AMS

AMS AS7261 Demo Kit Manuale utente

Novatek

Novatek NT6861 Manuale utente

Espressif Systems

Espressif Systems ESP8266 SDK Guida all'installazione

Nuvoton

Nuvoton ISD61S00 ChipCorder Guida

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuale utente

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuale utente

NEC

NEC 78GK0S/K 1+ Series Istruzioni per l'installazione e il funzionamento

Mikroe

Mikroe SEMITECH N-PLC Click Istruzioni per l'installazione e il funzionamento

Intel

Intel Agilex Manuale utente

Cypress

Cypress CY4607 HX2VL Manuale utente

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuale utente

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuale utente

Espressif Systems

Espressif Systems ESP8266EX Istruzioni operative

Abov

Abov AC33M8128L Manuale utente

Laird

Laird BL654PA Manuale utente

Silicon Laboratories

Silicon Laboratories C8051F800 Manuale utente

Energy micro

Energy micro EFM32 Giant Gecko Starter Kit Manuale utente

Mikroe

Mikroe click Proximity 2 Manuale utente