Texecom Premier Elite 32XP-W Manuale utente

Installation Manual

Premier Elite 8XP-W & Premier Elite 32XP-W

INS467-8

Premier Elite 8XP-W & 32XP-W Installation Manual 
2 INS467-8 
1. Content 
1. Content.................................................2 
2. Premier Elite 8XP-W & 32XP-W ............ 3 
3. Ricochet V3.xx and above.................... 4 
Panel flashing consequences .......................... 4 
System Requirements.................................... 5 
System Design Considerations ..................... 5 
Multiple Expander Systems.............................. 5 
Learning Devices ............................................. 5 
Learning Premier Elite SmartKey™................... 5 
Placing Devices ............................................... 5 
4. Quick Start Guide ................................6 
5. System Overview ................................. 7 
Mounting the Expander.................................. 7 
Wiring ............................................................. 8 
Selecting an Address..................................... 8 
Ricochet Expander Addressing..................... 8 
Introduction ..................................................... 8 
Example 1 Totally wireless system(s)............... 9 
Example 2 Premier Elite 168™, + 32XP-W, 8XP-
W's & 8XP's mix ............................................... 9 
Example 3 Premier Elite™48, 32XP-W + 8XP's. 9 
6. Programming ..................................... 10 
Premier Elite™ V2.10> 12/24/48/88/168 
Ricochet Learn Menu................................... 10 
Auto Zone Type & Area................................ 11 
Deleting Devices .......................................... 11 
Summary of Keys used................................ 12 
Premier EliteV2.00 - V2.09 24/48/88/168 & 640 
+ Ricochet V2.xx.......................................... 12 
Option Switches ............................................ 12 
Introduction ................................................... 12 
Deleting Devices............................................ 13 
Device Modes of Operation............................ 13 
Zone Types & Attributes................................. 13 
Premier Elite SmartKey™............................. 15 
Introduction ................................................... 15 
Premier Elite SmartKey™ Routing .................. 15 
Deleting a Premier Elite SmartKey™............... 15 
Learning Premier Elite SmartKey™................. 16 
Premier 412/816 V9.5 &V11.10 & Later, Premier 
832 2.5 &V4.10 & Later................................. 17 
Option Switch Settings................................... 17 
Expander Settings ......................................... 17 
Removing Detectors ...................................... 18 
Learning SmartKey™ ..................................... 18 
SmartKey™.................................................... 19 
Learning Devices directly to the 8XP-W & 
32XP-W......................................................... 19 
Using the Engineers Keypad ....................... 19 
7. Ricochet Diagnostics .......................... 20 
Premier Elite 8XP-W & 32XP-W V3.XX ......... 20 
Green Power LED .......................................... 20 
Bank of 8 LED’s............................................. 20 
LED................................................................20 
Status.............................................................20 
Premier Elite V2.XX & later ...........................20 
Devices ..........................................................20 
Premier Elite SmartKey™................................20 
Interpreting Keypad Displays..........................20 
Ricochet Diagnostics Menu ............................23 
Premier Elite V3.XX>....................................24 
Low signal security.........................................24 
8. Modes of Operation ...........................24 
Commission Mode........................................24 
Expander........................................................24 
Device Commission Mode..............................24 
Device Specific Functions............................25 
All devices......................................................25 
Impaq Plus-W.................................................25 
Impaq Contact-W ...........................................25 
Walktest Mode ..............................................25 
Control Panel .................................................25 
Expander........................................................25 
Engineers Keypad..........................................25 
Ricochet Monitor ............................................25 
9. System Attributes ..............................26 
Polling...........................................................26 
System Devices ............................................26 
Auto Mode .....................................................26 
Always Awake ................................................26 
Device Specific...............................................26 
Hybrid Mode (V2.xx).......................................26 
Premier Elite SmartKey™ .............................27 
LED Indications ..............................................27 
PA Activation ..................................................27 
Enable/Disable Alarm Status LED’s ................27 
Auxiliary Functions .........................................27 
Instant Disarm ................................................27 
Alarm Status LED’s.........................................27 
Arm Fail Indication..........................................28 
Battery Considerations.................................28 
Premier Elite 8XP-W & 32XP-W Power Loss29 
10. Specifications ..................29 
Electrical .......................................................29 
Physical.........................................................29 
Wireless ........................................................29 
Standards......................................................30 
Warranty........................................................30 
Notes:............................................................31 

Premier Elite 8XP-W & 32XP-W Installation Manual

INS467-8 3

2. Premier Elite 8XP-W & 32XP-W

Texecom has developed a new method of wireless security signalling based on the concept of mesh

networking. Mesh-networking is the process whereby every single wireless device is capable of receiving

and retransmitting any signal from any other wireless device on the network. The size, scalability and range

of the entire system are extended as wireless signalling is no longer limited by point-to point

communications. The range of a Ricochet®enabled wireless system is greater than previous systems, with

multiple devices capable of relaying messages to and from even the most remote locations in a building.

Each Ricochet enabled device provides signalling routes to and from control panels. If the wireless

communication between devices weakens, the Ricochet network ‘self-heals’ and automatically re-routes

communications via alternate Ricochet enabled devices. The reliability of the wireless system increases as

more Ricochet devices are installed. SignalSecurity™ further enhances network reliability with each device

already aware of the number of communication paths available to it.

The 8XP-W &32XP-W expanders can be used on any premier control panel; however certain features and

functions are dependent on the version of panel firmware as detailed in the table below. To determine the

firmware version of your control panel press /4 on the keypad.

Firmware versions prior to those listed are NOT compatible.

Control Panel

Premier 8 XP-W &

32XP-W

Legacy

Ricochet

Ricochet V2/V3.xx

Premier 412

V10.5 –V11.07

V11.10> & PV1.0>

Ricochet Mode

Premier 816

V10.5 –V11.07

V11.10> & PV1.0>

Ricochet Mode

Premier 816E

Not supported

Premier 832

V3.5 –V4.07

V4.10> & PV1.0>

Ricochet Mode

Premier 24

V7.00 –V8.23

V8.24>

Ricochet Mode

Premier 48/88/168

V7.00 –V8.13

V8.15>

Ricochet Mode

Premier 640

V7.00 –V8.15

Not Released

Ricochet Mode

V1 Premier Elite

24/48/88/168 & 640

N/A

V1.00>

Ricochet Mode

V2-V2.09 Premier

Elite 24/48/88/168 &

640

See Section 3

N/A

V2.00>

** V2.10 > Premier

Elite

12/24/48/88/168 &

640*

See Section 3

N/A

V2.10>

V4.00 > Premier

Elite

12/24/48/88/168 &

640*

See Section 3

N/A

V3.00>

** New dedicated Ricochet learn menu added. Existing methods of learning still exist.

Premier Elite 8XP-W & 32XP-W Installation Manual

4 INS467-8

3. Ricochet V3.xx and above

Premier Elite Series™control panels with V4.xx firmware now contains additional Ricochet V3 capability.

This new technology adds new features and functions for Ricochet enabled security systems.

DO NOT mix V1 &V2/V3 expanders on the same Premier Elite panel

V3 Expander Diagnostics

V3 expanders have the ability to display diagnostic information about devices. Please see page 20 for full

details.

V3 Expander & V4 Premier Elite Control Panels

Temperature Readings are available from supported devices

Expanders can be replaced without the need to relearn devices

oThis only applies if devices were originally learned to a V4 panel.

Panel flashing consequences

Panel

Version

Expander

Version

Relearn devices if

you replace the

expander?

Relearn if you Flash Elite

24/48/88/168 & 640 to

V4.X.X

Relearn if you Flash

Elite 12-W/24-W & 48-W

to V4.X.X

V2.X.X

V3.X.X

All

Versions

Yes

V4.X.X>

1.X.X

2.X.X

Yes

3.0.6

V3 Multiple Expander Support

V2 introduced multiple expander support to the system allowing for greater flexibility in system design, and

also taking wireless capability to new levels.

Control Panel Capacity

The table below details the maximum number of expanders, devices and Premier Elite SmartKey™ that

may be used on the different control panels, other configurations may be possible by mixing Premier Elite

32XP-W & Premier Elite 8XP-W.

Panel

32XP-W

8XP-W

Expanders

Devices

Premier Elite

SmartKey™

Expanders

Devices

Premier Elite

SmartKey™

Premier Elite 12-W &

Live™

N/A

Premier Elite 24™

Premier Elite 48™

Premier Elite 48-W™

N/A

Premier Elite 88™

100

Premier Elite 168™

128

200

Premier Elite 640™

512

256

512

1000

Premier Elite 32XP-W take 4 address slots on the network, Premier Elite 8XP-W take one address

Premier Elite 8XP-W & 32XP-W Installation Manual

INS467-8 5

System Requirements

To enable all of the advanced functionality and diagnostics capability for Ricochet V3 the following are

minimum requirements:-

Wintex™ Version 6.2 Build 4 or later

Ricochet Monitor™ 0.2.18.5.1 or later

Premier Elite™ Series V4.xx or later

Premier Elite™ 32XP-W & 8-W Expanders V3.xx or later

Expander firmware version can be found on the round green sticker located on the RH side of the PCB.

System Design Considerations

To ensure correct setup and operation of the Wireless Network it is important that the following procedures

are used when learning and placing devices.

Multiple Expander Systems

When using multiple expanders great care should be taken when designing the system. Each expander

should be treated as its own wireless network; it is not possible for devices to hop from one wireless

network to the other; it is also not possible for expanders to pass wireless signals from devices not

assigned to them and nor can the expanders talk to each other.

Learning Devices

All devices should be learnt before they are placed in their final location. The expander should be in

commission mode, please see page 24.This will ensure that they are registered on the receiver or control

panel, and that Mesh Networks and routing are established correctly. Please refer to the relevant section in

this document to Learn Devices to the system.

Learning Premier Elite SmartKey™

Premier Elite SmartKey™ should only be learned AFTER all devices and expanders are in their final

location, this is critical on larger systems where multiple expanders are being used

Devices should be at least 30cm’s away but no further than 10m from the receiver when being learned.

Placing Devices

Once all of the devices have been learnt, they will need placing in their desired location, this should be

done by installing devices closest to the expander first and then working outwards so that the last devices

installed are those furthest away from the expander.

Make sure to install devices with the expander in Commission mode. See page 24.

Devices also have a commission mode which will indicate a secure and valid path of communication to the

receiver. See page 24.

You should wait at least 20 minutes after installing the last device to make sure routing has been correctly

established between all system devices.

For maximum reliability and system integrity avoid long and thin set-ups. Do not mount devices on or near

metal. Keep devices away from mains electricity supplies.

Devices are capable of hopping through up to two other devices, or a maximum of three hops.

Premier Elite 8XP-W & 32XP-W Installation Manual

6 INS467-8

Connect Receiver to Control

Panel Network & Leave

Tamper Circuit Open.

See Page 7

4. Quick Start Guide

Check Panel Firmware

Version

See Page 3

Ricochet V1 & V2

Legacy

Contact Technical Support

for a Legacy Manual.

Ensure all Option Switches

are off

See Page 7

Learn Devices to Control

Panel

See Page 10 Onwards

set attributes

See Page 10 Onwards

Place Devices in desired

location, use LED to

indicate Signal Security

See Page 5 & 24

Wait 20 Minutes for Mesh

Network to establish

Walk Test System

See Page 25

Change Device Attributes according to

application

See pages 20 & 26

Premier Elite 8XP-W & 32XP-W Installation Manual

INS467-8 7

5. System Overview

1: Engineers Keypad Connection

An engineer’s keypad (Premier/Elite LCD keypad and interface lead)

can be temporarily plugged onto this connector to allow system

programming and testing. (Functions dependent on Panel firmware

version) Set the keypad address switches to all on.

2: Network Connection

The + and –terminals provide power whilst the T and R terminals

are transmit and receive data.

3: For Future Use

4: Comm. Port Connection

Serial communications port for connecting the 8 XP-W & 32XP-W to

a PC via PC Com/USB Com or Com IP/WiFi for use with Ricochet

Monitor Software.

5: Lid Tamper

When open puts the system into commission mode and digitally

attenuates the receiver signal by 15Db.

6: Programming/Diagnostic LED’s

Allows programming of devices directly to the receiver, in

conjunction with the learn switch (Legacy mode only). For

diagnostic information please see page 20

7: Antenna

RF Antenna.

8: Network LED's

Green LED = Data received by the expander from the panel Red

LED = Data transmitted by the expander to the panel. (The flash

rate depends on the mode and RF activity)

9: Heartbeat LED

Flashes steadily to indicate that the receiver is functioning correctly.

If the light is ON or OFF all the time, then there could be a hardware

problem.

10: Learn Switch

To be used with programming LED’s to learn devices directly to the

receiver.

11: Options Switch

Use to select the receiver functionality depending on panel

firmware.

Switch 1 ON =firmware dependant, please see the relevant

programming section.

Switch 2 ON = Legacy Mode

OFF = Ricochet

Switch 3 OFF = Impaq Contact-W Wired Input 2 will report as

Tamper (default)

ON = input 2 will report as an Alarm.

Switch 4 Walk test

12: Address Switch

Used to assign the address of the receiver on the network

13: RF LED

Flashes when transmitting or receiving RF data

14: Tamper Disable

Disables the lid and rear tamper

15: Engineer’s Keypad LED's

Red LED flashes constantly, the flash rate increases when data is

being transmitted.

16: Flash Programming Port

Variant dependent, for flashing the expander with updated firmware.

Mounting the Expander

Remove each screw cap by inserting a flat bladed screwdriver into the slot and turning anti-clockwise,

excessive force is NOT required. Remove both of the cover screws and put them in a safe place along with

the screw caps. Gently pull the cover away from the base applying slight pressure to the sides at the top of

the expander if required. The front cover should now be off.

Mount the expander using at least two appropriate countersunk screws (no larger than No. 8). A keyhole slot

has been provided to assist mounting and aid levelling.

If required a screw should be placed into the knockout on the rear of the expander to enable the rear/wall

tamper.

Do not mount near metal or mains supplies. When using with metal control panels a minimum of 50cm gap is

required. Do not mount near aerials of any description, or other wireless equipment.

1 2 3 4 5 6 7 8

2 4

Premier Elite 8XP-W & 32XP-W Installation Manual

8 INS467-8

Wiring

It is strongly recommended that the system is completely powered down (mains and battery) before wiring

the expander. Connect the expander to the control panel using 4-core cable as follows:

Expander

Control Panel

Description

+12V Supply

0V Supply

Transmit Data

Receive Data

The networks are made up of four terminals incorporating power and data. To ensure correct operation, all

four terminals on the device must be connected to the corresponding terminals on the control panel or

previous device.

Expanders can be connected using 4-core cable. However, it is recommended that 6 or 8-core cable is used

as the spare cores can be used to ‘Double Up’ on the power connections if needed.

Standard 7/0.2 alarm cable can be used for most installations. However, under certain conditions it may be

necessary to use screened cable.

Selecting an Address

Each expander must be assigned a different address using the DIL switches located on the PCB. The table

below shows the expander addressing:

Address

DIL 1

DIL 2

DIL 3

DIL 4

On or Off

Off

Never set two expanders on the same network to the same address. Expanders are factory set to address 1.On

legacy panels the expander will occupy 1 x Expander slot on the control panel, as well as the Network Receiver

slot.

Ricochet Expander Addressing

Introduction

The address range and switch position will depend on which combination of expanders are being used. Each

32XP-W takes up 4 address slots on the control panel network, however the network slots are virtual until

Premier Elite 8XP-W & 32XP-W Installation Manual

INS467-8 9

devices are assigned to available zones. It is possible that if a 32XP-W is being used at Address 1, but only 16

devices have been used, Address 3 & 4 are available for hardwired 8XP's or 8XP-W's.

Please see some examples of mixing different types of Expanders on various Elite panels and the addressing

requirements.

Example 1 Totally wireless system(s)

Panel

32XP-W

Network 1

Network 2

Network 3

Network 4

Network 5

Network 6

Network 7

Network 8

Expanders

(Max)

Premier

Elite 88™

Exp

N/A

Expander

Address

N/A

Premier

Elite 168™

Exp

N/A

Expander

Address

N/A

Premier

Elite 640™

Exp

Expander

Address

Example 2 Premier Elite 168™,+ 32XP-W, 8XP-W's & 8XP's mix

Panel

Network 1

Network 2

Expanders (Wireless)

Expanders (Mixed)

Premier Elite 168™

32XP-W

2 x 8XP-W

8XP-W

8XP

Expander Address

5 & 6

Devices (Max)

Premier Elite SmartKey™(Max)

N/A

Example 3 Premier Elite™48,32XP-W + 8XP's

Panel

Network 1

Expanders (Mixed)

Premier Elite 48™

32XP-W

2 x 8XP

Expander Address

3 & 4

Devices Used

Premier Elite SmartKey™(Max)

N/A

Premier Elite 8XP-W & 32XP-W Installation Manual

10 INS467-8

6. Programming

For all Legacy Control panels, please contact Technical Support to obtain a legacy manual.

It is highly recommended that you upgrade the Panel Firmware to the latest version to ensure full

compatibility; however the system is backwards compatible as detailed in the table on page 3.

It is not possible to upgrade Premier panels to Premier Elite firmware.

Premier Elite™ V2.10> 12/24/48/88/168 Ricochet Learn Menu

V2.10 contains a dedicated Ricochet learn menu accessible via the /key when in Engineer menu.

This new feature is only for devices, SmartKey™ should be learnt to the system in the User Menu as

described later in this section.

Learn Devices from first power up

Follow the instructions given in INS176-8 or later for the first power up of the system.

When the "Confirm Devices" menu appears check and make sure all installed Keypads and Expanders are

showing; press /and /again to confirm.

Providing the system has a Ricochet®enabled expander installed, the following will appear. The flow

diagram shows the procedure to learn devices:-

YES to Select:-

Learn Ricochet



Learn Device?

Zone ??? N?,E??

Power up Device!

N?,E?,D?? - 20s

Learn Device to

Zone ??? N?,E??



nnU



Altri manuali per Premier Elite 32XP-W

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Texecom Estensione

Texecom

Texecom Premier Elite 8XP Manuale utente

Texecom

Texecom Premier 8X Manuale utente

Texecom

Texecom Premier OP16 Manuale utente

Texecom

Texecom Premier Elite 32XP-W Manuale utente

Texecom

Texecom W/32XP-W Manuale utente

Texecom

Texecom Premier8XP Manuale utente

Texecom

Texecom premier 60ixd Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente