Texecom W/32XP-W Manuale utente
Premier Elite 8XP-
W/32XP-W
Wireless Mesh Networking Expander
INS467-9
INS467-9 2/47
Content
1.0 Premier Elite 8XP-W & 32XP-W 3 ............................................................................................
2.0 Ricochet V3.xx and above 4 .....................................................................................................
2.1 System Requirements 6 .........................................................................................................
2.2 System Design Considerations 6 ............................................................................................
3.0 Quick Start Guide 8 ...................................................................................................................
4.0 System Overview 9 ....................................................................................................................
4.1 Mounting the Expander 11 .....................................................................................................
4.2 Wiring 12 ................................................................................................................................
4.3 Selecting an Address 12 .........................................................................................................
4.4 Ricochet Expander Addressing 13 ..........................................................................................
5.0 Programming 14 ........................................................................................................................
5.1 Premier Elite™ V2.10 / 12/24/48/88/168 Ricochet Learn Menu 15 .........................................
5.2 Auto Zone Type & Area 17 .....................................................................................................
5.3 Deleting Devices 17 ...............................................................................................................
5.4 Summary of Keys used 19 ......................................................................................................
5.5 Premier EliteV2.00 - V2.09 24/48/88/168 & 640 + Ricochet V2.xx 19 ....................................
5.6 Premier Elite SmartKey™ 22 ..................................................................................................
5.7 Premier 412/816 V9.5 &V11.10 & Later, Premier 832 2.5 &V4.10 & Later 26 ........................
5.8 Learning Devices directly to the 8XP-W & 32XP-W 30 ............................................................
5.9 Using the Engineers Keypad 30 ..............................................................................................
6.0 Ricochet Diagnostics 30 ...........................................................................................................
6.1 Premier Elite 8XP-W & 32XP-W V3.XX 30 ...............................................................................
6.2 Premier elite V2.XX & later 31 ................................................................................................
6.3 Premier Elite V3.XX / 36 .........................................................................................................
7.0 Modes of Operation 36 .............................................................................................................
7.1 Commission Mode 36 .............................................................................................................
7.2 Device Specific Functions 37 ..................................................................................................
7.3 Walktest Mode 38 ...................................................................................................................
8.0 System Attributes 39 ................................................................................................................
8.1 Polling 39 ................................................................................................................................
8.2 System Devices 39 .................................................................................................................
8.3 Premier Elite SmartKey™ 41 ..................................................................................................
8.4 Battery Considerations 44 ......................................................................................................
8.5 Premier Elite 8XP-W & 32XP-W Power Loss 44 .......................................................................
9.0 Specifications 45 ........................................................................................................................
9.1 Electrical 45 ............................................................................................................................
9.2 Physical 45 .............................................................................................................................
9.3 Wireless 46 .............................................................................................................................
9.4 Standards 46 ..........................................................................................................................
9.5 Warranty 47 ...........................................................................................................................
INS467-9 3/47
1.0 Premier Elite 8XP-W & 32XP-W
Texecom has developed a new method of wireless security signalling based on the
concept of mesh networking. Mesh-networking is the process whereby every single
wireless device is capable of receiving and retransmitting any signal from any
other wireless device on the network. The size, scalability and range of the entire
system are extended as wireless signalling is no longer limited by point-to point
communications. The range of a Ricochet® enabled wireless system is greater
than previous systems, with multiple devices capable of relaying messages to and
from even the most remote locations in a building. Each Ricochet enabled device
provides signalling routes to and from control panels. If the wireless
communication between devices weakens, the Ricochet network ‘self-heals’ and
automatically re-routes communications via alternate Ricochet enabled devices.
The reliability of the wireless system increases as more Ricochet devices are
installed. SignalSecurity™ further enhances network reliability with each device
already aware of the number of communication paths available to it.
The 8XP-W & 32XP-W expanders can be used on any premier control panel;
however certain features and functions are dependent on the version of panel
firmware as detailed in the table below. To determine the firmware version of your
control panel press N/N 4 on the keypad.
N Firmware versions prior to those listed are NOT compatible.
INS467-9 4/47
2.0 Ricochet V3.xx and above
Premier Elite Series™ control panels with V4.xx firmware now contains
additional Ricochet V3 capability. This new technology adds new features and
functions for Ricochet enabled security systems.
N DO NOT mix V1 &V2/V3 expanders on the same Premier Elite panel
V3 Expander Diagnostics
V3 expanders have the ability to display diagnostic information about devices.
Please see chapter 6.0 for full details.
V3 Expander & V4 Premier Elite Control Panels
Temperature Readings are available from supported devices
INS467-9 5/47
Expanders can be replaced without the need to relearn devices
This only applies if devices were originally learned to a V4 panel.
V3 Multiple Expander Support
V2 introduced multiple expander support to the system allowing for greater
flexibility in system design, and also taking wireless capability to new levels.
Control Panel Capacity
The table below details the maximum number of expanders, devices and Premier
Elite SmartKey™ that may be used on the different control panels, other
configurations may be possible by mixing Premier Elite 32XP-W & Premier
Elite 8XP-W.
N Premier Elite 32XP-W take 4 address slots on the network, Premier Elite 8XP-W
take one address
INS467-9 6/47
2.1 System Requirements
To enable all of the advanced functionality and diagnostics capability for Ricochet
V3 the following are minimum requirements:-
Wintex™ Version 6.2 Build 4 or later
Ricochet Monitor™ 0.2.18.5.1 or later
Premier Elite™ Series V4.xx or later
Premier Elite™32XP-W & 8-W Expanders V3.xx or later
N Expander firmware version can be found on the round green sticker located on
the RH side of the PCB.
2.2 System Design Considerations
To ensure correct setup and operation of the Wireless Network it is important that
the following procedures are used when learning and placing devices.
Multiple Expander Systems
When using multiple expanders great care should be taken when designing the
system. Each expander should be treated as its own wireless network; it is not
possible for devices to hop from one wireless network to the other; it is also not
possible for expanders to pass wireless signals from devices not assigned to them
and nor can the expanders talk to each other.
Learning Devices
All devices should be learnt before they are placed in their final location. The
expander should be in commission mode, please see chapter 7.1.This will ensure
that they are registered on the receiver or control panel, and that Mesh Networks
and routing are established correctly. Please refer to the relevant section in this
document to Learn Devices to the system.
Learning Premier Elite SmartKey™
Premier Elite SmartKey™ should only be learned AFTER all devices and
INS467-9 7/47
expanders are in their final location, this is critical on larger systems where
multiple expanders are being used
N Devices should be at least 30cm’s away but no further than 10m from the
receiver when being learned.
Placing Devices
Once all of the devices have been learnt, they will need placing in their desired
location, this should be done by installing devices closest to the expander first and
then working outwards so that the last devices installed are those furthest away
from the expander.
Make sure to install devices with the expander in Commission mode. See chapter
7.1.
Devices also have a commission mode which will indicate a secure and valid path
of communication to the receiver. See chapter 7.1.
N You should wait at least 20 minutes after installing the last device to make sure
routing has been correctly established between all system devices.
N For maximum reliability and system integrity avoid long and thin set-ups. Do
not mount devices on or near metal. Keep devices away from mains electricity
supplies.
N Devices are capable of hopping through up to two other devices, or a maximum
of three hops.
INS467-9 8/47
3.0 Quick Start Guide
INS467-9 9/47
4.0 System Overview
1: Engineers Keypad Connection
An engineer’s keypad (Premier/Elite LCD keypad and interface lead) can be
temporarily plugged onto this connector to allow system programming and testing.
(Functions dependent on Panel firmware version) Set the keypad address switches
to all on.
2: Network Connection
The + and – terminals provide power whilst the T and R terminals are transmit and
receive data.
3: For Future Use
INS467-9 10/47
4: Comm. Port Connection
Serial communications port for connecting the 8 XP-W & 32XP-W to a PC via PC
Com/USB Com or Com IP/WiFi for use with Ricochet Monitor Software.
5: Lid Tamper
When open puts the system into commission mode and digitally attenuates the
receiver signal by 15Db.
6: Programming/Diagnostic LED’s
Allows programming of devices directly to the receiver, in conjunction with the
learn switch (Legacy mode only). For diagnostic information please see chapter
6.0.
7: Antenna
RF Antenna.
8: Network LED's
Green LED = Data received by the expander from the panel Red LED = Data
transmitted by the expander to the panel. (The flash rate depends on the mode
and RF activity)
9: Heartbeat LED
Flashes steadily to indicate that the receiver is functioning correctly. If the light is
ON or OFF all the time, then there could be a hardware problem.
10: Learn Switch
To be used with programming LED’s to learn devices directly to the receiver.
11: Options Switch
Use to select the receiver functionality depending on panel firmware.
Switch 1 ON =firmware dependant, please see the relevant programming section.
Switch 2 ON = Legacy Mode
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Texecom Estensione
Texecom
Texecom Premier Elite 8XP Manuale utente
Texecom
Texecom Premier 8X Manuale utente
Texecom
Texecom Premier OP16 Manuale utente
Texecom
Texecom Premier Elite 32XP-W Manuale utente
Texecom
Texecom Premier8XP Manuale utente
Texecom
Texecom premier 60ixd Manuale utente
Texecom
Texecom Premier Elite 32XP-W Manuale utente
