TEXIO DL-1060 Manuale utente

INSTRUCTION MANUAL

6 1/2 DIGITAL MULTIMETER

DL-1060

DL-1060G/ DL-1060VG

DL-1060R/ DL-1060VR

B71-0180-31

 
CONTENTS 
 
USING THE PRODUCT SAFELY··········································································· Ⅰ-Ⅲ
OVERVIEW ························································································································1 
1 GENERAL INFOMATION ····································································································1 
1.1 Feature Overview ···································································································1 
1.2Inspection ·············································································································2 
1.3Taking off the black rubber ring··················································································2 
1.4The DL-1060’s Dimension ························································································3 
1.5Update of the user's manual······················································································3 
2 SETTING UP DL-1060 ·····································································································4 
2.1 To adjust the handle································································································4 
2.2 To connect the power ······························································································6 
2.2.1 To convert the voltage ········································································································6 
2.2.2 To change the power-line fuse································································································9 
2.2.3 To change the current input fuse··························································································· 13 
2.3 Factory Default When Power-ON ············································································· 16 
3 DL-1060 FUNCTION INTRODUCTION ·················································································· 17 
3.1 The Front Panel ··································································································· 17 
3.2 The Display········································································································· 19 
3.2.1 Annunciators··················································································································· 19 
3.3 The Rear Panel···································································································· 20 
BASIC MEASUREMENT FUNCTION····················································································· 21 
1 VOLTAGE MEASUREMENTS (DCV &ACV)··········································································· 21 
2 RATIO MEASUREMENTS (DC VOLTAGE ONLY)······································································· 22 
3 CURRENT MEASUREMENTS (DC &AC) ·············································································· 24 
4 RESISTANCE MEASUREMENTS (2 &4-WIRE)········································································· 25 
5 FREQUENCY &PERIOD MEASUREMENTS············································································· 26 
6 CONTINUITY MEASUREMENTS·························································································· 28 
7 DIODE MEASUREMENTS································································································· 29 
8 TEMPERATURE MEASUREMENTS ······················································································ 30 
8.1 Thermocouple Measurements ················································································· 31 
8.2 RTD Measurements ······························································································ 31 
8.2.1 2-Wire RTD Measurements································································································ 32 
8.2.2 3-Wire RTD Measurements································································································ 32 
8.2.3 4-Wire RTD Measurements································································································ 33 
9 CAPACITANCE MEASUREMENTS ······················································································· 34 
10 2ND MEASUREMENT··································································································· 35 
FRONT PANEL OPERATIONS····························································································· 38 
1 MEASUREMENT CONFIGURATION······················································································ 38 
1.1 Set ADC (Auto Zero) ····························································································· 38 
1.2 Filter ·················································································································· 40 
1.2.1 AC Filter (AC only)··········································································································· 40 
1.2.2 Digital Filter ······················································································································ 41 
1.3 Resolution & NPLC Setting····················································································· 44 
1.4Threshold Resistance (Continuity)············································································ 46 
1.5Range (Manual & Auto)·························································································· 47 
1.6Rate (Integration Time) ·························································································· 48 
1.7Sensor Selection for Temperature Measurements························································ 50 
1.8Remote Interface Selection····················································································· 55 
2 TRIGGER OPERATIONS·································································································· 58 
2.1 Trigger Mode ······································································································· 59 
2.2 Trigger Source ····································································································· 61 
2.3 Trigger Setting ····································································································· 62 
3 MATH OPERATIONS······································································································ 66 
3.1Percent(%)·········································································································· 67 
3.2Average (AVG/MIN/MAX/COUNT)············································································ 68 
3.3Null(Relative)······································································································· 69 
3.4Limits Test ·········································································································· 70 
3.5MX+B················································································································· 72 
3.6dB/dBm ·············································································································· 73 

 
 
3.4 SYSTEM RELATED OPERATIONS······················································································· 76 
3.4.1 Display··············································································································· 76 
3.4.2 Beeper ··············································································································· 77 
3.4.3 Reading Memory (Store & Recall) ············································································ 79 
3.4.4 Sensitivity Band (Hold)··························································································· 80 
3.4.5 Initial Mode·········································································································· 82 
3.4.6 Language············································································································ 83 
3.4.7Error Condition····································································································· 83 
3.4.8Firmware Revision ································································································ 84 
3.4.9Calibration··········································································································· 84 
3.4.10 Self-test ············································································································ 85 
4 REMOTE INTERFACE OPERATIONS ··················································································· 86 
4.1 PASS/FAIL OUTPUT FROM USB CONNECTOR······································································· 86 
4.2 SETTING UP FOR REMOTE INTERFACE ··············································································· 87 
4.3 REMOTE INTERFACE COMMANDS······················································································ 88 
5 ERROR MESSAGE············································································································ 98 
5.1 ERROR TYPE·············································································································· 98 
5.1.1 Execution Errors··································································································· 98 
APPENDIX·························································································································102 
A. SPECIFICATION LIST ·······································································································102 
B. REMOTE INTERFACE REFERENCE ·······················································································106 
B.1 An Introduction to the SCPI Language··········································································106 
B.2 Output Data Formats ································································································109 
B.3 The MEASure? Command ·························································································109 
B.4 The CONFigure Command ························································································111 
B.5 The Measurement Configuration Command···································································112 
B.6 The Math Operation Command···················································································117 
B.7 The Triggering Commands·························································································119 
B.8 The System-Related Commands·················································································120 
B.9 The SCPI Status Reporting ························································································123 
B.10 Status Reporting Commands ····················································································127 
B.11 SCPI Compliance Information ···················································································128 
B.12 GP-IB (IEEE-488) Compliance Information ··································································129 
C. ABOUT APPLICATION PROGRAMS ·······················································································131 
C.1 Using MEASure? for a Single Measurement ··································································131 
C.2 Using CONFigure with a Math Operation ······································································133 
C.3 THE DEVQUERY FUNCTION ····················································································136 
 

USING THE PRODUCT SAFELY

■ Preface

To use the product safely, read this instruction manual to the end. Before using this product, understand how

to correctly use it. If you read the manuals but you do not understand how to use it, ask us or your local

dealer.After you read the manuals, save it so that you can read it anytime as required.

■ Pictorial indication and warning character indication

The manuals and product show the warning and caution items required to safely use the product. The

following pictorial indication and warning character indication are provided.

Some parts of this product or certain sections of the user’s guide may show

this pictorial indication. In this case, if that part of the product is used

incorrectly, the user’s body or the product may be exposed to serious danger.

Be sure to refer to this user’s guide when using parts with this pictorial

indication.

Some part of this product or the manuals may show this pictorial indication.

In this case, there are high voltage points. Be careful enough to handle the

product to avoid electric shock.

WARNING

If you ignore this indication and incorrectly use the product, you may be killed

or seriously injured. This indication means that a warning item is provided in

order to avoid extreme risk.

CAUTION

If you ignore this indication and incorrectly use the product, you may suffer

slight injury or the product may be damaged. This indication means that a

caution item is provided in order to avoid risk.

Please be informed that we are not responsible for any damages to the user or to the third person, arising

from malfunctions or other failures due to wrong use of the product or incorrect operation, except such

responsibility for damages as required by law.

USING THE PRODUCT SAFELY

WARNING

CAUTION

■ Do not remove the product's covers and panels

Never remove the product's covers and panels for any purpose.

Otherwise, the user's electric shock or fire may be incurred.

■ Warning on using the product

Warning items given below are to avoid danger to user's body and life and avoid the damage or deterioration of the

product. Use the product, observing the following warning and caution items.

■ Warning items on power supply

● Power supply voltage

The rated power supply voltages of the product are 100, 120, 220, and 240VAC. The rated power supply voltage for

each product should be confirmed by reading the label attached on the back of the product or by the “rated” column

shown in the instruction manual. The specification of power cord attached to the products is rated to 125VAC for all

products which are designed to be used in the areas where the power-line voltage is not higher than 125VAC.

Accordingly, you must change the power cord if you want to use the product at the power supply voltage higher than

125VAC. If you use the product without changing power cord to 250VAC rated one, electric shock or fire may be

caused. When you used the product equipped with power supply voltage switching system, please refer to the

corresponding chapter in the instruction manuals of each product.

● Power cable

Important: The attached power cord set can be used for this device only.

If the attached power cord is damaged, stop using the product and call us or your local dealer. If the power cord is

used without the damage being removed, an electric shock or fire may be caused.

● Protective fuse

If an input protective fuse is blown, the product does not operate. For a product with external fuse holder, the fuse

may be replaced. As for how to replace the fuse, refer to the corresponding chapter in the instruction manual. If no

fuse replacement procedures are indicated, the user is not permitted to replace it. In such case, keep the case closed

and consult us or your local dealer. If the fuse is incorrectly replaced, a fire may occur.

■ Warning item on Grounding

If the product has the GND terminal on the front or rear panel surface, be sure to ground the product to safely use it.

■ Warnings on installation environment

● Operating temperature and humidity

Use the product within the operating temperature indicated in the “rating” temperature column. If the product is used

with the vents of the product blocked or in high ambient temperatures, a fire may occur. Use the product within the

operating humidity indicated in the “rating” humidity column. Watch out for condensation by a sharp humidity

change such as transfer to a room with a different humidity. Also, do not operate the product with wet hands.

Otherwise, an electric shock or fire may occur.

●Use in gas

Use in and around a place where an inflammable or explosive gas or steam is generated or stored may result in an

explosion and fire. Do not operate the product in such an environment. Also, use in and around a place where a

corrosive gas is generated or spreading causes a serious damage to the product. Do not operate the product in such

an environment.

●Installation place

Avoid installing the product on inclined places or on places subject to vibration. Otherwise, the product may slip or fall

down to cause damages or injury accidents.

III

USING THE PRODUCT SAFELY

■Do not let foreign matter in

Do not insert metal and inflammable materials into the product from its vent and spill water on it. Otherwise, electric

shock or fire may occur.

■Warning item on abnormality while in use

If smoke or fire is generated from the product while in use, stop using the product, turn off the switch, and remove the

power cord plug from the outlet. After confirming that no other devices catch fire, ask us or your local dealer.

■Input/output terminal

Maximum input to terminal is specified to prevent the product from being damaged. Do not supply input, exceeding

the specifications that are indicated in the "Rating" column in the instruction manual of the product. Also, do not

supply power to the output terminals from the outside. Otherwise, a product failure is caused.

■Calibration

Although the performance and specifications of the product are checked under strict quality control during shipment

from the factory, they may be deviated more or less by deterioration of parts due to their aging or others. It is

recommended to periodically calibrate the product so that it is used with its performance and specifications stable.

For consultation about the product calibration, ask us or your local dealer.

■Daily Maintenance

When you clean off the dirt of the product covers, panels, and knobs, avoid solvents such as thinner and benzene.

Otherwise, the paint may peel off or resin surface may be affected. To wipe off the covers, panels, and knobs, use a

soft cloth with neutral detergent in it. During cleaning, be careful that water, detergents, or other foreign matters do

not get into the product. If a liquid or metal gets into the product, an electric shock and fire are caused. During

cleaning, remove the power cord plug from the outlet.

Use the product correctly and safely, observing the above warning and caution items.

Because the instruction manual indicates caution items even in individual items, observe

those caution items to correctly use the product.

If you have questions or comments about the manuals, ask us or E-Mail us.

1Overview

This chapter will give you an overview of DL-1060’s features and guide you through

the basics of DL-1060 digital multimeter

1.1 General Infomation

This section contains general information about DL-1060 Multimeter.

1.1.1 Feature Overview

DL-1060 series is a 6 1/2 digits multimeter. It has…

⚫Best performance/price ratio

⚫High-speed sampling rate (50000 Rdgs/sec. at NPLC 0.001)

⚫Direct Thermocouple Measurement (Built-In Cold Junction Compensation to improve

Accuracy)

⚫Dual Measurement & Dual Display (Including Thermocouple Measurement)

⚫Capacitance Measurement

⚫Several Measurements & Mathematic Functions

⚫Wide Range Current Measurement (Up to 10A)

⚫DCV Accuracy (0.012% in 1 year)

⚫High Sensitivity (DCV: 0.1 μV & Resistance: 100 μΩ)

⚫Plug & Play Interface: Built-In USB (USB-TMC)

⚫High Storage Memory (Up to 2000 Readings)

⚫Free Application Software

In addition, the DL-1060 series provides wide ranges for general measurements, such

as…

1. DCV: 100mV, 1V, 10V, 100V, and 1000V

2. ACV: 100mV, 1V, 10V, 100V, and 750V

3. DCI: 10mA, 100mA, 1A, 3A, and 10A

4. ACI: 1A, 3A, and 10A

5. 2 and 4-wired resistance: 100Ω, 1KΩ, 10KΩ, 100KΩ, 1MΩ, 10MΩ, and 100MΩ

6. Capacitance: 1nF, 10nF, 100nF, 1μF, 10μF, 100μF, 1000μF, and 10000μF

7. Thermocouple: -250℃to 1820℃

8. RTD: 2W and 4W

9. Frequency and Period: 100mV to 750V (From 3Hz to 300KHz)

10. Diode: 1V

11. Continuity (for 2W): 1000Ω

Some additional capabilities of DL-1060 include:

⚫Full Math Functions - Percent, Average, Null, Limits, MX+B, dB, and dBm.

⚫Resolution Adjustment - 0.001, 0.006, 0.02, 0.06, 0.2, 0.6, 1, 2, 10, and 100 NPLC

⚫USB, GP-IB(DL-1060G/VG), and RS-232C(DL-1060R/VR) remote control interface.

⚫Through DL-1060 AP software (DL-TOOL) for simulating the real operation on PC.

⚫Through Microsoft Office Word & Excel (DL-LINK) for remotely storing and recalling

the measured values.

1.1.2 Inspection

Your product package is supplied with the following items:

⚫One DL-1060 Multimeter unit.

⚫One power line cord.

⚫One USB cable.

⚫Standard Test Leads[1]

⚫One CD (including this electronic User's Manual and software applications).

[1] DL-1060 series is provided with a Standard Test Lead set, descryibed below.

Test Lead Ratings:

Material:

IEC 61010-031 CAT III

Operating Voltage: 1000V DC

Current: 10 Ampers

UL/CE Rated

Probe Body: Outer Insulation-Santoprene Rubber.

Banana Plug: Body Brass, Nickel Plated Spring Beryllium

Copper,Nickel Plated.

Insulation: Polypropylene Resin Flasme Retardant Grade

2038.

Others: If any part of the Test Lead Set is damaged, please do not use and replace with a

new set.

If users use the Test Lead Set without following the specification

of DL-1060, the protection of the Test Lead Set could be

impaired. In addition, please don’t use a damaged Test Lead Set

against the instrument break or personal injury.

1.1.3 Taking off the black rubber ring

Before using the DL-1060 DMM, taking off the black

rubber ring from the Power Switch

WARNING

1.1.4 The DL-1060’s Dimension

Please get the dimension’s information in the following different ways.

1. The dimension without the handle and the front & Rear Bumpers is in the following

Figure 1-1. (L x W x D - 214.6 x 88.6 x 280.7 mm)

2. The dimension with the handle and the front & Rear Bumpers is in the following

Figure1-2. (L x W x D . 252.8 x 107 x 305 mm)

3. The dimension with the front & Rear Bumpers, but without the handle is in the

following Figure 1-3. (L x W x D . 226.8 x 107 x 305 mm)

Figure 1-1

Figure 1-2

Figure 1-3

1.1.5 Update of the user's manual

To update the user's manual, please check our web site. The last update may be

downloaded from the web site.

(http://www.texio.co.jp/)

1.2Setting up DL-1060

The purpose of this section is to prepare you for using DL-1060 DMM. You may want

to check if you have all the parts with your multimeter. All our products are handled

and inspected professionally before shipping out to our customers. If you find any

damaged or missing parts, please contact your local service representative

immediately and do not attempt to operate the damaged product.

1.2.1 To adjust the handle

You may adjust the carrying handle to suit your needs. The following figures shows

you how to adjust the handle.

I. Taking off the handle from the Multimeter

【Step 1】(Turn up the handle)

Pull slightly outward on both sides of the handle and slowly rotate it up as shown in

Figure 1-4.

Figure 1-4

【Step 2】(Pull out the handle)

When the handle is turned up to 90° with the multimeter please pull out the handle

from the multimeter as shown in Figure 1-5.

Figure 1-5

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali TEXIO Multimetro

TEXIO

TEXIO DL-2052 Manuale utente

TEXIO

TEXIO DL-2060 Manuale utente

Manuali Multimetro popolari di altre marche

Agilent Technologies

Agilent Technologies 34420A Manuale utente

Fluke

Fluke 83 Manuale utente

Hameg

Hameg HM 8012 Manuale utente

Mastech

Mastech MY70 Manuale utente

Steren

Steren MUL-300 Manuale utente

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Manuale utente

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Manuale utente

PeakTech

PeakTech 4000 Manuale per l'uso e la cura

YOKOGAWA

YOKOGAWA 90050B Manuale utente

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Manuale utente

Fluke

Fluke 8846A Manuale operativo e di manutenzione

Tempo Communications

Tempo Communications MM200 Manuale utente

Elenco Electronics

Elenco Electronics CM-1555 Manuale utente

Mastech

Mastech MS8238C Manuale utente

SDAR

SDAR 830A, 830B, 830D, 830C Manuale utente

RS PRO

RS PRO RS-9519BT Manuale utente

BGS technic

BGS technic 8890 Manuale utente

Amprobe

Amprobe Hexagon 60 Manuale utente