Ultra Cable Feeder
Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
4
IMPORTANT SAFETY INFORMATION
Do not use the cable feeder in a haz-
ardous environment. Hazards include
ammable liquids, gases,
or other materials. Using the cable
feeder in a hazardous environment
can result in a re or explosion.
Failure to observe these warnings will
result in severe injury or death.
Crushing hazard:
Keep all parts of the body away•
from the tires.
Do not wear loose clothing when•
operating this tool.
Failure to observe this warning could
result in severe injury or death.
This device contains no brake mech-
anism. Do not use as a cable brake or
to raise or lower loads.
A runaway condition could occur
resulting in severe injury or death.
Disconnect from power when loading cables.•
Accidental start-up can result in serious injury.
Do not attach lifting slings to the upper drive unit.•
The drive unit will break loose and the cable feeder
will fall.
Failure to observe this warning could result in severe
injury or death.
Electric shock hazard:
Inspect the power cord before con-•
necting to a power source. Using a
damaged cord can result in electric
shock.
Disconnect tool from power source•
before servicing. Electric shock can
result.
Failure to observe these warnings
could result in severe injury or death.
Do not remove guards.
Failure to observe this warning could
result in severe injury or death.
Do not load with cables totaling more than 150 mm•
(6") across. Cables may feed off of the tires, result-
ing in cable damage.
Do not allow sharp objects to contact the tires.•
Failure to observe this precaution may result in
damage to the tire.
Inspect the tool before using. Replace worn, •
damaged or missing parts with Greenlee replace-
ment parts. A damaged or improperly assem-
bled component could break and strike nearby
personnel.
Use this tool for manufacturer’s intended •
purpose only. Use other than that which is
described in this manual can result in injury or prop-
erty damage.
Note: Keep all decals clean and legible, and replace
when necessary.
