Note: 1. More details refer to User Manual. 2. For better readability, please print this document with laser printer. 3. Version:TS-500_QG_EN_V1.3.
TS-500 Presentation Imager Quick Guide
Note
Parts of the imager
Installing the cable
1. Switch off the host;
2. Refer to the below pictures, connect the host with the imager based on different cables;
3. Ensure that all connections are secure.
4. Switch on the host system. If the installation is successful, the beeper will beep and LED
will light.
RS232 cable USB cable
Return default parameters and version information
Default value initialization
Firmware version list
Note: If the host cannot receive data normally becausethe input speed of the imager is too
fast, please scan the barcode below:
Programming instruction and example
Two programming modes have been provided as bellows:
ØSingle-scan setting
Scan the appropriate
Single-scan setting
Example: to set Flow control to be XON/XOFF.
ØMultiple-scan setting
Example: to set Flow control to be XON/XOFF.
F
A standard packing includesa
, a USB cable and a CD (or a user manual).
F
include a RS232 cable, a 5V adaptor.
F
Scan window
Beeper
Trigger
All manuals and user guides at all-guidesbox.com
all-guidesbox.com
