THERMOSTAT / CONTROL OF TEMPERATURES
The thermostat temperature programs the desired
temperature that will appear on the display of the unit.
The thermostat has been programmed to maintain a
constant temperature.
The compressor will start when the temperature inside
the container increases between 0.5 ° and 1.5 ° C
SETTING THE TEMPERATURE
When the Fridge / Freezer is connected to the network with the AC or DC cable, the digital led shows the current
temperature inside the unit. To set the temperature use the up and down keys:
to increase the temperature press the button up to the desired temperature setting; press to lower the
temperature to the desired temperature.
ECO/MAX FUNCTION
This function allows to slow the speed of the compressor
to increase operational efficiency (ECO) or to increase
the speed of the compressor to provide rapid cooling
times (MAX).
Press the button to activate the ECO mode, the ECO
indicator will light up.
Press again the button to select the MAX mode, the
MAX red indicator will light up.
ENERGY SAVING SUGGESTIONS
Choose a well ventilated and protected from direct
sunlight location to allocate the Fridge/Freezer and
allow air to circulate around the refrigerator.
Cool food before placing it in the refrigerator.
Do not open or do not leave the lid open for longer than
is actually necessary.
If ice forms on the inside walls or on the lid, defrost the
refrigerator.
SETTING THE TEMPERATURE FOR FRIDGE / FREEZER DOUBLE DOOR
The temperature stated on the left side of the display corresponds to the left side of the container;
the temperature stated on the right side of the display corresponds to the right side of the container.
The temperature can be set independently for each of the two compartments in a range from -18 ° C to
+10 ° C.
Consider the compartment on the right for lowest temperatures similar to the freezer of a home
refrigerator.
Always set first the temperature of the compartment on the right.
The control panel will allow to set the temperature of the left area identical or warmer than the
the right area but it will not allow you to set a lower temperature compared to the right area.
Caution: the right area must always be set to a temperature equal or lower than the temperature of
the left area. If the right area is set at a temperature warmer than the temperature of the left area, the
temperature of the left area will be automatically adjusted to be equal to the right area temperature.
POWER OF A SINGLE COMPARTMENT
This Fridge-Freezer offers the possibility of keeping off the left area when it is not necessary to use it and
use the area on the right as a Fridge / Freezer.
To turn off the left area simultaneously press the 2 buttons to turn off or reactivate the area.
go to next pagego to the site www.polibox.com
