thomann Millenium SR-2012 Manuale utente
SR-2012, SR-2018, SR-2024, SR-2008
studio rack
assembly instructions
Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
E-mail: [email protected]
Internet: www.thomann.de
26.11.2019, ID: 129416, 129418, 129419, 351448
Table of contents
1 Safety instructions.......................................................................................................................................................................................................... 4
2 Scope of delivery.............................................................................................................................................................................................................. 5
3 Installation.......................................................................................................................................................................................................................... 7
4 Technical specications............................................................................................................................................................................................. 12
5 Protecting the environment.................................................................................................................................................................................... 14
Table of contents
SR-2012, SR-2018, SR-2024, SR-2008
3
1 Safety instructions
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children.
Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from the product. They could swallow the pieces
and choke!
Never let children play unattended with the product.
CAUTION!
Risk of injury to the hands
When assembling and screwing the individual parts, pay attention to sharp edges on tools, screws and components. Use only
suitable tools.
CAUTION!
Risk of injury due to heavy weight
Due to the heavy weight of the product, at least two persons are required for transport and assembly.
Safety instructions
studio rack
4
2 Scope of delivery
Before you assemble your rack, make sure the contents of package is complete according to the following list.
19-inch studio sack Millenium SR-2012
n1 × baseplate, steel sheet
n1 × cover plate, steel sheet
n2 × side panel, sheet steel with rack rails, guide rail for heavy duty angles and ventilation grilles
n2 × caster
n2 × caster with locking system
n4 × height-adjustable stand
n8 × Allen screw M6 × 20
n8 × plastic cap
n12 × heavy duty angle
n12 × Allen screw M6 × 15
n12 × nut for heavy duty angle
n24 × cage nut M6
n24 × Phillips screw M6 × 20
n24 × plastic washer
n1 × Allen wrench
n1 × assembly instruction
19-inch studio rack Millenium SR-2018
n1 × baseplate, steel sheet
n1 × cover plate, steel sheet
n2 × side panel, sheet steel with rack rails, guide rail for heavy duty angles and ventilation grilles
n2 × caster
n2 × caster with locking system
n4 × height-adjustable stand
n8 × Allen screw M6 × 20
n8 × plastic cap
n18 × heavy duty angle
n18 × Allen screw M6 × 15
n18 × nut for heavy duty angle
n32 × cage nut M6
n32 × Phillips screw M6 × 20
n32 × plastic washer
n1 × Allen wrench
n1 × assembly instruction
Scope of delivery
SR-2012, SR-2018, SR-2024, SR-2008
5
19-inch studio rack Millenium SR-2024
n1 × baseplate, steel sheet
n1 × cover plate, steel sheet
n2 × side panel, sheet steel with rack rails, guide rail for heavy duty angles and ventilation grilles
n2 × caster
n2 × caster with locking system
n4 × height-adjustable stand
n8 × Allen screw M6 × 20
n8 × plastic cap
n24 × heavy duty angle
n24 × Allen screw M6 × 15
n24 × nut for heavy duty angle
n48 × cage nut M6
n48 × Phillips screw M6 × 20
n48 × plastic washer
n1 × Allen wrench
n1 × assembly instruction
19-inch studio rack Millenium SR-2008
n1 × baseplate, steel sheet
n1 × cover plate, steel sheet
n2 × side panel, sheet steel with rack rails, guide rail for heavy duty angles and ventilation grilles
n2 × caster
n2 × caster with locking system
n4 × height-adjustable stand
n8 × Allen screw M6 × 20
n8 × plastic cap
n6 × heavy duty angle
n6 × Allen screw M6 × 15
n6 × nut for heavy duty angle
n16 × cage nut M6
n16 × Phillips screw M6 × 20
n16 × plastic washer
n1 × two-piece crossbar
n1 × Allen wrench
n1 × assembly instruction
Scope of delivery
studio rack
6
3 Installation
Overview
The following gure provides an overview of the positioning of the individual components. In addition to the Allen key supplied,
you will need a suitable Phillips screwdriver and a soft pad for the assembly.
Installation
SR-2012, SR-2018, SR-2024, SR-2008
7
Assembly steps
1. Turn the baseplate (1) so that you can screw the two side panels (2) in the baseplate (1) with each two Allen screws
M6 × 20 (3) using the Allen key supplied.
Use a soft padding to prevent damage to the mounting or housing surface.
2. Place the assembled unit with the baseplate facing down on a suitable mounting surface. Use a soft padding to prevent
damage to the mounting or housing surface.
Screw the heavy duty angles (4), the M6 × 15 Allen screws (5) and the heavy duty angle nuts (6) in the guide rails of the side
panels using the Allen wrench as shown. Make sure that the heavy duty angle nut (6) is inside the guide rail.
Installation
studio rack
8
3. Place the cover plate (7) of the housing on the mounted unit and screw the cover plate in place with four Allen screws
M6 × 20 (3) in the two side panels using the provided Allen wrench.
4. Insert the four plastic caps (8) into the recesses on the cover plate.
Installation
SR-2012, SR-2018, SR-2024, SR-2008
9
5. Place the assembled unit with the cover plate facing down on a suitable mounting surface. Use a soft padding to prevent
damage to the mounting or housing surface.
Mount the two casters (10) and the two locking casters (9) or alternatively the four height-adjustable feet (11) to the base
plate.
Only valid for item no. 351448 Millenium SR-2008
6. Position the assembled unit with the rollers / height-adjustable feet facing down.
Mount the crossbar (12) with four Phillips screws M6 × 20 (13) and four cage nuts M6 (14) with a Phillips screwdriver in the
rack rails of the side panels as shown.
Installation
studio rack
10
Altri manuali per Millenium SR-2012
1
Questo manuale è adatto per i seguenti modelli
7
Indice
Altri manuali thomann Rack e supporto
thomann
thomann STARVILLE T-Bar 120 Manuale utente
thomann
thomann ROADWORX Manuale utente
thomann
thomann Stageworx BLS-315 Pro Lighting Stand B Manuale utente
thomann
thomann t.racks Thon Studio Rack 10U Manuale utente
thomann
thomann THON Studio 2HE Manuale utente
thomann
thomann Millenium BS-2400 Manuale utente
thomann
thomann Combo Stand 40 Manuale utente
thomann
thomann Stageworx LB-3 Manuale utente
thomann
thomann Roadworx Multi Electric Stand Manuale utente
thomann
thomann THON Studio 2U Manuale utente
thomann
thomann Thon LP Manuale utente
thomann
thomann Millenium SR-2012 Guida rapida
thomann
thomann t.racks Thon Studio Rack 10U Manuale utente
thomann
thomann ROADWORX BLS-2700 Manuale utente
thomann
thomann Stageworx BLS-300 HD Manuale utente
thomann
thomann LD Systems U 300 RK Manuale utente
thomann
thomann VARYTEC Wind Up 85 kg TUV Manuale utente
thomann
thomann Stageworx BLS-315 Pro Lighting Stand B Manuale utente
thomann
thomann ROADWORX Lighting Stand 1 Manuale utente
thomann
thomann SP-320 Manuale utente
