THOR TH-SSM-CAT Manuale utente

THOR-SSM

Rev. : 02/09/2012 1

Welcome to the THOR Family!

Thank you for purchasing a THOR Small Switch! We appreciate your business, and we think

you’ll appreciate the many ways that your THOR system will save you money, time, and

effort.

The THOR Small Switch offers three fundamental uses:

•As a Multiplex Repeater: the DVI signals (+optional audio) coming from a signal

source are equalized and distributed on up to 7 equivalent outputs. A control is not

necessary. Distributed display systems can be realized (Digital Signage).

•As an 8-port Crosspoint Switch: each port can be switched optionally as an input or

output. You can, for example, switch and distribute the signals from 3 signal

sources on up to 5 displays (allowing simultaneous presentations on several

displays). Alternatively, signals coming from 7 signal sources can be switched in

turn to a single display. The changeover can be triggered remotely using the serial

interface (RS232) and/or by a push-button at the device.

•As a 7-port KVM Switch: up to 7 Single-head ports (a “Single-head” extender

system supports 1x monitor, 1x keyboard, 1x mouse) or up to 3 Dual-head ports (a

Dual-head extender system supports 2x monitor, 1x keyboard, 1x mouse). The

changeover can be triggered remotely using the serial interface (RS232) and/or by a

push-button at the device.

Cascade multiple devices in two stages for all applications to give up to 49/1 connections.

The THOR Small Switch has the advantage that it can be positioned up to 140m away from

both your signal source and display device. This becomes possible by using the proven

THOR Extender technology for the transmission of DVI- Monitor and USB-Keyboard and

Mouse signals over CATx- cable.

The operation of a THOR Small Switch always requires at least one Local Unit and up to

seven Remote Units from the THOR Extenders range.

DISCONTINUED

THOR-SSM

2 Rev. : 02/09/2012

Wherever long distances cause problems for remotely locating and switching a monitor

(keyboard/mouse) signal, e.g. airports, industrial plants, call centers or in distributed

computer centers, the THOR Small Switch is the best solution. Its flexibility allows it to

tackle many tasks.

In addition, there are 4 Media Extenders (DVI + optional audio) and 8 KVM- Extenders

(DVI+USB keyboard mouse + optional audio) available. The transmission of the signals

requires connecting CATx cable.

This manual will tell you all about your new THOR Small Switch, including how to install,

operate and troubleshoot it. For an introduction to the Converter, see Chapter 2.

The Converter product codes covered in this manual are:

8port THOR Small Switch devices:

TH-SSM-CAT

THOR-SSM,SWITCH,SMALL,ON,CATx

TH-SSM-MM THOR-SSM,SWITCH,SMALL,ON,MULTIMODE

TH-SSM-SM THOR-SSM,SWITCH,SMALL,ON,SINGLEMODE

TH-SSM THOR-SSM,SWITCH,SMALL,FIBER,NO,GBIC

TH-SU THOR-SU,SWITCHING,UNIT

THOR KVM/DVI extending devices:

TH-E-KIT-1-SL-4-CAT

THOR,E,EXTENDER,KIT,1Mon,SL,4xHID,CATx

TH-E-KIT-1-SL-4-CAT-A232

THOR,E,EXTENDER,KIT,1Mon,SL,4xHID,CATx,Anal.Audio,RS232

TH-E-KIT-1-SL-4-CAT-DA

THOR,E,EXTENDER,KIT,1Mon,SL,4xHID,CATx,Dig.Audio

TH-E-KIT-1-SL-4-MM

THOR,E,EXTENDER,KIT,1Mon,SL,4xHID,MM,Fiber

TH-E-KIT-1-SL-4-MM-A232

THOR,E,EXTENDER,KIT,1Mon,SL,4xHID,MM,Fiber,Anal.Audio,RS232

TH-E-KIT-1-SL-4-MM-DA

THOR,E,EXTENDER,KIT,1Mon,SL,4xHID,MM,Fiber,Dig.Audio

TH-E-KIT-1-SL-4-SM

THOR,E,EXTENDER,KIT,1Mon,SL,4xHID,SM,Fiber

TH-E-KIT-1-SL-4-SM-A232

THOR,E,EXTENDER,KIT,1Mon,SL,4xHID,SM,Fiber,Anal.Audio,RS232

TH-E-KIT-1-SL-4-SM-DA

THOR,E,EXTENDER,KIT,1Mon,SL,4xHID,SM,Fiber,Dig.Audio

TH-E-KIT-1-SL-2-CAT

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,CATx

TH-E-KIT-1-SL-2-CAT-A232

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,CATx,Anal.Audio,RS232

TH-E-KIT-1-SL-2-CAT-DA

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,CATx,Dig.Audio

TH-E-KIT-1-SL-2-CAT-V

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,CATx,VGA/IN

TH-E-KIT-1-SL-2-MM

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,MM,Fiber

THOR-SSM

Rev. : 02/09/2012 3

TH-E-KIT-1-SL-2-MM-A232

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,MM,Fiber,Anal.Audio,RS232

TH-E-KIT-1-SL-2-MM-DA

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,MM,Fiber,Dig.Audio

TH-E-KIT-1-SL-2-MM-V

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,MM,Fiber,VGA/IN

TH-E-KIT-1-SL-2-SM

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,SM,Fiber

TH-E-KIT-1-SL-2-SM-A232

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,SM,Fiber,Anal.Audio,RS232

TH-E-KIT-1-SL-2-SM-DA

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,SM,Fiber,Dig.Audio

TH-E-KIT-1-SL-2-SM-V

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,SM,Fiber,VGA/IN

TH-E-KIT-1-SL-24-CAT

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,4xUSB2,CATx

TH-E-KIT-1-SL-24-CAT-

A232

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,4xUSB2,CATx,Anal.RS232

TH-E-KIT-1-SL-24-CAT-DA

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,4xUSB2,CATx,Dig.Audio

TH-E-KIT-1-SL-24-MM

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,4xUSB2,MM,Fiber

TH-E-KIT-1-SL-24-MM-A232

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,4xUSB2,MM,Fiber,Anal.Audio,RS232

TH-E-KIT-1-SL-24-MM-DA

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,4xUSB2,MM,Fiber,Dig.Audio

TH-E-KIT-1-SL-24-SM

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,4xUSB2,SM,Fiber

TH-E-KIT-1-SL-24-SM-A232

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,4xUSB2,SM,Fiber,Anal.Audio,RS232

TH-E-KIT-1-SL-24-SM-DA

THOR,E,EXTENDER,KIT,1Mon,SL,2xHID,4xUSB2,SM,Fiber,Dig.Audio

TH-E-KIT-2-SL-4-CAT

THOR,E,EXTENDER,KIT,2Mon,SL,4xHID,CATx

TH-E-KIT-2-SL-4-CAT-A232

THOR,E,EXTENDER,KIT,2Mon,SL,4xHID,CATx,Anal.Audio,RS232

TH-E-KIT-2-SL-4-CAT-DA

THOR,E,EXTENDER,KIT,2Mon,SL,4xHID,CATx,Dig.Audio

TH-E-KIT-2-SL-4-MM

THOR,E,EXTENDER,KIT,2Mon,SL,4xHID,MM,Fiber

TH-E-KIT-2-SL-4-MM-A232

THOR,E,EXTENDER,KIT,2Mon,SL,4xHID,MM,Fiber,Anal.Audio,RS232

TH-E-KIT-2-SL-4-MM-DA

THOR,E,EXTENDER,KIT,2Mon,SL,4xHID,MM,Fiber,Dig.Audio

TH-E-KIT-2-SL-4-SM

THOR,E,EXTENDER,KIT,2Mon,SL,4xHID,SM,Fiber

TH-E-KIT-2-SL-4-SM-A232

THOR,E,EXTENDER,KIT,2Mon,SL,4xHID,SM,Fiber,Anal.Audio,RS232

TH-E-KIT-2-SL-4-SM-DA

THOR,E,EXTENDER,KIT,2Mon,SL,4xHID,SM,Fiber,Dig.Audio

TH-E-KIT-2-SL-24-CAT

THOR,E,EXTENDER,KIT,2Mon,SL,2xHID,4xUSB2,CATx

TH-E-KIT-2-SL-24-CAT-

A232

THOR,E,EXTENDER,KIT,2Mon,SL,2xHID,4xUSB2,CATx,Anal.Audio,RS232

TH-E-KIT-2-SL-24-CAT-DA

THOR,E,EXTENDER,KIT,2Mon,SL,2xHID,4xUSB2,CATx,Dig.Audio

TH-E-KIT-2-SL-24-MM

THOR,E,EXTENDER,KIT,2Mon,SL,2xHID,4xUSB2,MM,Fiber

TH-E-KIT-2-SL-24-MM-A232

THOR,E,EXTENDER,KIT,2Mon,SL,2xHID,4xUSB2,MM,Fiber,Anal.Audio,RS232

TH-E-KIT-2-SL-24-MM-DA

THOR,E,EXTENDER,KIT,2Mon,SL,2xHID,4xUSB2,MM,Fiber,Dig.Audio

TH-E-KIT-2-SL-24-SM

THOR,E,EXTENDER,KIT,2Mon,SL,2xHID,4xUSB2,SM,Fiber

TH-E-KIT-2-SL-24-SM-A232

THOR,E,EXTENDER,KIT,2Mon,SL,2xHID,4xUSB2,SM,Fiber,Anal.Audio,RS232

TH-E-KIT-2-SL-24-SM-DA

THOR,E,EXTENDER,KIT,2Mon,SL,2xHID,4xUSB2,SM,Fiber,Dig.Audio

TH-E-KIT-4-SL-8-CAT

THOR,E,EXTENDER,KIT,4Mon,SL,8xHID,CATx

TH-E-KIT-4-SL-8-CAT-A232

THOR,E,EXTENDER,KIT,4Mon,SL,8xHID,CATx,Anal.Audio,RS232

TH-E-KIT-4-SL-8-CAT-DA

THOR,E,EXTENDER,KIT,4Mon,SL,8xHID,CATx,Dig.Audio

TH-E-KIT-4-SL-8-MM

THOR,E,EXTENDER,KIT,4Mon,SL,8xHID,MM,Fiber

THOR-SSM

4 Rev. : 02/09/2012

TH-E-KIT-4-SL-8-MM-A232

THOR,E,EXTENDER,KIT,4Mon,SL,8xHID,MM,Fiber,Anal.Audio,RS232

TH-E-KIT-4-SL-8-MM-DA

THOR,E,EXTENDER,KIT,4Mon,SL,8xHID,MM,Fiber,Dig.Audio

TH-E-KIT-4-SL-8-SM

THOR,E,EXTENDER,KIT,4Mon,SL,8xHID,SM,Fiber

TH-E-KIT-4-SL-8-SM-A232

THOR,E,EXTENDER,KIT,4Mon,SL,8xHID,SM,Fiber,Anal.Audio,RS232

TH-E-KIT-4-SL-8-SM-DA

THOR,E,EXTENDER,KIT,4Mon,SL,8xHID,SM,Fiber,Dig.Audio

TH-E-KIT-4-SL-24-CAT

THOR,E,EXTENDER,KIT,4Mon,SL,2xHID,4xUSB2,CATx

TH-E-KIT-4-SL-24-CAT-

A232

THOR,E,EXTENDER,KIT,4Mon,SL,2xHID,4xUSB2,CATx,Anal.Audio,RS232

TH-E-KIT-4-SL-24-CAT-DA

THOR,E,EXTENDER,KIT,4Mon,SL,2xHID,4xUSB2,CATx,Dig.Audio

TH-E-KIT-4-SL-24-MM

THOR,E,EXTENDER,KIT,4Mon,SL,2xHID,4xUSB2,MM,Fiber

TH-E-KIT-4-SL-24-MM-A232

THOR,E,EXTENDER,KIT,4Mon,SL,2xHID,4xUSB2,MM,Fiber,Anal.Audio,RS232

TH-E-KIT-4-SL-24-MM-DA

THOR,E,EXTENDER,KIT,4Mon,SL,2xHID,4xUSB2,MM,Fiber,Dig.Audio

TH-E-KIT-4-SL-24-SM

THOR,E,EXTENDER,KIT,4Mon,SL,2xHID,4xUSB2,SM,Fiber

TH-E-KIT-4-SL-24-SM-A232

THOR,E,EXTENDER,KIT,4Mon,SL,2xHID,4xUSB2,SM,Fiber,Anal.Audio,RS232

TH-E-KIT-4-SL-24-SM-DA

THOR,E,EXTENDER,KIT,4Mon,SL,2xHID,4xUSB2,SM,Fiber,Dig.Audio

THOR-SSM

Rev. : 02/09/2012 5

Copyrights and Trademarks

the prior written consent of the manufacturer.

Information in this document is subject to change without notice and the manufacturer shall

not be liable for any direct, indirect, special, incidental or consequential damages in

connection with the use of this material.

All trademark and trade names mentioned in this document are acknowledged to be the

property of their respective owners.

Disclaimer

While every precaution has been taken in the preparation of this manual, the manufacturer

assumes no responsibility for errors or omissions. Neither does the manufacturer assume any

liability for damages resulting from the use of the information contained herein. The

manufacturer reserves the right to change the specifications, functions, or circuitry of the

product without notice.

The manufacturer cannot accept liability for damage due to misuse of the product or due to

any other circumstances outside the manufacturer’s control (whether environmental or

installation related). The manufacturer shall not be responsible for any loss, damage, or injury

arising directly, indirectly, or consequently from the use of this product.

Cautions and Notes

The following symbols are used in this guide:

CAUTION: This indicates an important operating instruction

that should be followed to avoid any potential damage to

hardware or property, loss of data, or personal in ury.

NOTE. This indicates important information to help you make the best use of

this product.

THOR-SSM

6 Rev. : 02/09/2012

EC DECLARATION OF CONFORMITY

The products listed in this manual in the form as delivered are in conformity with the

provisions of the following European Directives:

2004/108/EG Council Directive on the approximation of the laws of the Member States

relating to electromagnetic compatibility

CE-marking 2009

List on page 2 and 3

Conformity to the Directives is assured through the application of the following

standards:

EN 55022: 09/2006 Class A

IEC 61000-4-2: 02/2001

IEC 61000-4-3: 05/2006

IEC 61000-4-4: 12/2004

IEC 61000-4-5: 11/2006

This declaration certifies the conformity to the specified directives but contains no

assurance of properties. The safety documentation noted in this manual shall be

considered in detail. The length of the attached CPU- or Console Cables must not exceed

3m. The use of suggested interconnect cables is mandatory.

WARNING: This equipment has been found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

SAFETY-PRECAUTIONS AND

INSTALLATION GUIDLINES

Rev. : 02/09/2012 7

Safety Precautions and Installation Guidelines

To ensure reliable and safe long-term operation, please note the following installation

guidelines:

•Do not use CATx- devices to link between buildings – please use fiber devices.

•Only use in dry, indoor environments.

•If the building has 3-phase AC power, try to ensure that equipment connected to the

Local and Remote Units is on the same phase.

•Try not to route a CATx- link cable alongside power cables.

•The THOR Small Switch Unit, Remote Unit, Local Unit and any power supplies can get

warm. Do not locate them in an enclosed space without any airflow.

•Do not place a power supply directly on top of a unit.

•Do not obscure a unit’s ventilation holes.

To safeguard against personal in ury and avoid possible

damage to equipment or property, please observe the

following:

•Only use power supplies originally supplied with the

product or manufacturer-approved replacements. Do not

attempt to dismantle or repair any power supply. Do not

use a power supply if it appears to be defective or has a

damaged case.

•Connect all power supplies to grounded outlets. In each

case, ensure that the ground connection is maintained

from the outlet socket through to the power supply’s AC

power input.

•Do not attempt to modify or repair this product, or make

a connection from the CATx- link interface (RJ45) to any

other products, especially telecommunications or

network equipment.

THOR-SSM

8 Rev. : 02/09/2012

CONTENTS

Rev. : 02/09/2012 9

Contents

1. Quick Setup 14

2. Overview 15

2.1

Introduction 15

2.2

Glossary 16

2.3

Example of a THOR Small Switch System 17

2.4

Features 18

2.5

Product Range 19

2.6

Compatibility 23

Interface Compatibility 23

2.7

How to Use This Guide 24

Connection & Compatibility 24

DDC Information 24

Selecting the moment of switching to the next frame 24

Selection of Color reduction for transfer acceleration 24

3. Installation 25

3.1

Package Contents 25

3.2

Interconnection Cable Requirements 28

3.3

System Setup 30

3.4

Installation Instructions 33

4. Device Views 34

4.1

THOR Small Switch for CATx 34

Configuration ‘Multiplex-Repeater’ – 1 Source up to 7 Displays 34

Configuration ‘Multiplex-Repeater’ – 2 Sources / each up to 3 Displays 34

Configuration ‘Multiplex-Repeater’ – 4 Sources on 4 Displays 35

Configuration ‘Crosspoint-Switch’ 1 Input / 7 Outputs 35

Configuration ‘Crosspoint-Switch’ 2 Inputs / 6 Outputs 36

Configuration ‘Crosspoint-Switch’ 3 Inputs / 5 Outputs 36

Configuration ‘Crosspoint-Switch’ 4 Inputs / 4 Outputs 37

Configuration ‘Crosspoint-Switch’ 5 Inputs / 3 Outputs 37

Configuration ‘Crosspoint-Switch’ 6 Inputs / 2 Outputs 38

Configuration ‘Crosspoint-Switch’ 7 Inputs / 1 Output 38

Configuration ‘Single-head KVM-Switch’ 39

Configuration ‘Dual-head KVM-Switch’ 39

4.2

THOR Media Extender 41

4.3

THOR KVM Extender 43

5. Diagnostic 54

5.1

THOR Small Switch for CATx 54

THOR-SSM

10 Rev. : 02/09/2012

5.2

THOR Small Switch for CATx 55

5.3

THOR Media/ KVM Extender 56

6. Service Setup 57

6.1

THOR Small Switch for CATx 57

Operating Mode Selection 58

Connection of THOR Control External Switching Device (Accessories) 60

6.2

THOR Media/ KVM Extender 62

6.3

Setup at the Local Unit 63

DDC / color depth 63

Loading the DDC Information from the Remote Monitor into the internal DDC Table 64

Selection of Color depth 64

6.4

Setup at the Remote Unit 65

Selecting the moment of switching to the next frame 65

7. Operating Modes 66

7.1

Multiplex- Repeater 66

Configuration ‘Multiplex-Repeater’ –

1 Source up to 7 Displays 66

Configuration ‘Multiplex-Repeater’ –

2 Sources, each up to 3 displays 67

Configuration ‘Multiplex-Repeater’ –

4 Sources on 4 Displays 67

Example Applications: 68

Indicator LEDs 70

Meaning of the diagnostic LEDs: 70

Setup 71

Operation 71

By serial interface 71

Control commands 71

7.2

Crosspoint- Switch 72