Timberwolf TW 18/100G Manuale utente

CONTENTS

Section Page No.

INTRODUCTION 1

PURPOSE OF MACHINE 2

MACHINE DIMENSIONS & SPECIFICATIONS 2

PARTS LOCATION DIAGRAMS 3 & 4

SAFE WORKING 5

Operator’s Personal Protective Equipment Required 5

Basic Woodchipping Safety 5

General Safety Matters - Do’s and Dont’s 6

Noise Test 7

OPERATING INSTRUCTIONS 8

Safe Transportation 8

Hitching onto the Tow Ball 8

Unhitching the Chipper 8

Delivery 9

Operator’s Personal Protective Equipment Required 9

Engine Controls 9

Starting the Engine 9

Stopping the Engine 10

Daily Checks Before Starting 10

Starting to Chip 10

Chipping 10

Blade Wear 11

Blockages 11

SERVICE INSTRUCTIONS 12

Service Schedule 13

Engine Servicing 13

Engine Manufacturers Handbook 13

Spares 13

Safe Maintenance 14

Copper Ease Safety Information 14

Safe Lifting of the Chipper 14

Check Fittings 14

Change Blades 15

Tension Drive Belts 15

WARRANTY STATEMENT 16

EC DECLARATION OF CONFORMITY CERTIFICATE 17

DECALS 18 & 19

PARTS LISTS 20 - 29

16th Sept 09

TIMBERWOLF TW 18/100G

Thank you for choosing this Timberwolf brushwood chipper. Timberwolf chippers are

designed to give safe and dependable service if operated according to the instructions.

Before using your new chipper, please take time to

read this manual which contains

IMPORTANT HEALTH AND SAFETY INFORMATION

and explains the chipper controls. Failure to do so could result in:

- personal injury

- equipment damage

- damage to property

- a member of the general public becoming injured

This manual covers the operation and maintenance of the Timberwolf 18/100G. All

information in this manual is based on the latest product information available at the

time.

All the information you need to operate the machine safely and effectively is contained

within pages 3 to 11. Ensure that all operators are adequately trained for operating

this machine, especially with regard to safe working practices.

Timberwolf's policy of constantly improving their products may involve major or minor

changes to the chippers or their accessories. Timberwolf reserves the right to make

changes at any time without notice and without incurring any obligation.

Due to improvements in design and performance during production, there may be, in

some cases, minor discrepancies between the actual chipper and the text in this

manual.

The manual should be considered a permanent part of the

machine and should remain with it if the machine is resold.

CAUTION or WARNING

Be aware of this symbol and where shown,

carefully follow the instructions

This caution symbol indicates important safety messages in this manual. When

you see this symbol, be alert to the possibility of injury to yourself or others, and

carefully read the message that follows.

Always follow safe operating and maintenance practices

INTRODUCTION

Serial No. Location

The serial number can be

found on top of the rotor

housing.

The Timberwolf 18/100G brushwood chipper is designed to chip solid wood material up to 100 mm

in diameter. It is capable of chipping over 1.5 tonne of brushwood per hour.

1570 mm

DIMENSIONS

2195 mm

2910 mm

1280 mm

PURPOSE OF MACHINE

TIMBERWOLF TW 18/100G 2

2560 mm

Engine type Briggs & Stratton 4 stroke OHV

Maximum power 13.4kW (18hp)

Cooling method Air cooled

Overall weight 375kg

Starting method Recoil

Blade bolt torque 22lbft - 30 Nm

General M10 bolt torque 34lbft - 46Nm

General M12 bolt torque 60lbft - 81Nm

Type of feed Gravity

Maximum diameter material 100 mm (4")

Material processing capacity 1.5 tonnes/hr

Fuel capacity 8.5 litres

Fuel type Unleaded petrol

Oil Capacity 1.4 litres

Oil Type SAE10W-30

TIMBERWOLF TW 18/100G SPECIFICATION

PARTS LOCATOR 3

FEED

FUNNEL

DISCHARGE

BUCKET

ROTOR

HOUSING

BELT

GUARD

TOW

HEAD

JOCKEY

WHEEL

ASSEMBLY

DISCHARGE

HANDLE

DISCHARGE

TUBE

DISCHARGE

CLAMPS

DRAW BAR

CONTROL PANEL

FUEL

TANK

EXHAUST

SKID PLATE

RESTRAINING

CABLE

PARTS LOCATOR 4

ROTOR

FAN SECTION (x 2)

CUTTER

BLADES

ENGINE DRIVE

PULLEY

DRIVE

BELTS

ROTOR DRIVE

PULLEY

DRIVE BELT

TENSIONER

PULLEY

SAFE WORKING 5

BASIC WOODCHIPPING SAFETY

The operator should be aware of the following points:

MAINTAIN A SAFETY EXCLUSION ZONE around the chipper of at least 10 metres for the

general public or employees without adequate protection. Use hazard tape to identify this

working area and keep it clear from debris build up. Chips should be ejected away from any

area the general public have access to.

HAZARDOUS MATERIAL - Some species of trees and bushes are poisonous. The chipping

action can produce vapour, spray and dust that can irritate the skin. This may lead to

respiratory problems or even cause serious poisoning. Check the material to be chipped before

you start. Avoid confined spaces and use a facemask if necessary.

BE AWARE when the chipper is processing material that is an awkward shape. The material

can move from side to side in the funnel with great force. If the material extends beyond the

funnel, the brash may push you to one side causing danger. Badly twisted brash should be

trimmed before being chipped to avoid thrashing in the feed funnel.

BE AWARE that the chipper can eject chips out of the feed funnel with considerable force.

Always wear full head and face protection.

ALWAYS work on the side of the machine furthest from any local danger, e.g. not road side.

WARNING

The chipper will feed material through on its own. To do this, it relies on

sharp blades on the chipper rotor. To keep the blades sharp, only feed the

machine with clean brushwood. DO NOT put muddy/dirty wood, roots,

potted plants, bricks, stones or metal into the chipper. !

OPERATOR'S PERSONAL PROTECTIVE EQUIPMENT REQUIRED

Chainsaw safety helmet

fitted with mesh visor and

recommended ear defenders

to the appropriate

specifications.

Work gloves with

elasticated wrist.

Close fitting heavy-duty

non-snag clothing.

Face mask if

appropriate.

DO NOT

wear rings, bracelets,

watches, jewellery or any

other items that could be

caught in the material and

draw you into the chipper.

Steel toe cap safety boots.

SAFE WORKING 6

GENERAL SAFETY MATTERS

DO NOT operate chipper unless available light is

sufficient to see clearly.

DO NOT use or attempt to start the chipper

without the feed funnel, guards and discharge

unit securely in place.

DO NOT stand directly in front of the feed funnel

when using the chipper. Stand to one side.

DO NOT allow -

DO NOT smoke when refuelling.

DO NOT let anyone who has not received

instruction operate the machine.

DO NOT climb on the machine at any time.

DO NOT handle material that is partially engaged

in the machine.

DO NOT touch any exposed wiring while

machine is running.

DO NOT use the chipper inside buildings.

- to enter the machine, as damage is likely.

ALWAYS stop the chipper engine before making

any adjustments, refuelling or cleaning.

ALWAYS check rotor has stopped rotating and

remove chipper ignition key before maintenance

of any kind, or whenever the machine is to be left

unattended.

ALWAYS check the machine is well supported

and cannot move.

ALWAYS operate the chipper with the engine set

to maximum speed when chipping.

ALWAYS check (visually) for fluid leaks.

ALWAYS take regular breaks. Wearing personal

protective equipment for long periods can be

tiring and hot.

ALWAYS keep hands, feet and clothing out of

feed opening, discharge and moving parts.

ALWAYS use the next piece of material or a push

stick to push in short pieces. Under no

circumstances should you reach into the funnel.

ALWAYS keep the operating area clear of people,

animals and children.

ALWAYS keep the operating area clear from

debris build up.

ALWAYS keep clear of the chip discharge tube.

Foreign objects may be ejected with great force.

ALWAYS ensure protective guarding is in place

before commencing work. Failure to do so may

result in personal injury or loss of life.

ALWAYS operate the chipper in a well ventilated

area - exhaust fumes are dangerous.

DO’S AND DON’TS

BRICKS STRING CLOTH PLASTIC STONES

METAL GLASS RUBBER ROOTS BEDDING

PLANTS



SAFE WORKING

MACHINE:

NOTES:

TW 18/100G

TESTED CHIPPING 50 mm x 50 mm CORSICAN PINE

1.5m IN LENGTH

NOISE TEST

Noise levels above 80dB (A) will be experienced at the working position. Wear ear protection

at all times to prevent possible damage to hearing. All persons within a 4 metre radius must

also wear good quality ear protection.

91.2 dB

96.7 dB

101 dB

R= 4 metres

Guaranteed Sound Power: 125dB (A)

109.3 dB

As required by Supply of Machinery (safety) regulations of 2008.

R= 10 metres

95.5 dB

97.6 dB

OPERATING INSTRUCTIONS 8

SAFE TRANSPORTATION

WHEN towing a chipper the maximum speed limit is 60 mph.

ON rough or bumpy road surfaces reduce speed accordingly to protect your machine from

unnecessary vibration.

WHEN towing off road be aware of objects that may catch the chipper undergear.

WHEN towing off road ensure inclination is not excessive.

AVOID excessively pot holed ground.

WHEN reversing the chipper the short wheel base will react quickly to steering.

ALWAYS check the discharge is tight before moving.

KEEP tyre pressures inflated to 1.8 bar or 26 psi.

CHECK wheel nuts are tightened to 90Nm or 65 lbs ft.

CLEAR loose chippings and debris from the machine before departing.

ENSURE the feed funnel is closed and the catch is properly engaged before departing.

CHECK the ball head is well greased.

WIND jockey wheel assembly anticlockwise until the tow head is above the height of the ball

hitch on the vehicle.

REVERSE the vehicle so the ball hitch is directly below the tow head.

ATTACH the breakaway cable / secondary coupling to a strong point on the vehicle, not the

ball hitch.

GRASP handle on tow head and push back catch with thumb.

WIND the jockey wheel assembly clockwise, to lower the tow head onto the ball hitch.

RELEASE handle and continue to wind jockey wheel clockwise. The tow head should snap

into place on the ball hitch. If it doesn't, repeat previous 2 steps.

WIND jockey wheel up until fully retracted and the jockey wheel frame is seated in its notch on

the stem. The chipper weight should be fully on the vehicle.

RELEASE the jockey wheel clamp and slide the jockey wheel assembly fully up.

TIGHTEN clamp on the jockey wheel assembly.

CONNECT electrical plug to socket on rear of towing vehicle and check operation of all the

trailer and vehicle lights.

THE chipper is now properly attached to the vehicle.

HITCHING ONTO THE TOW BALL

ENSURE the chipper will not roll away after being disconnected from the vehicle.

DISCONNECT the electrical cable from the vehicle socket.

RELEASE breakaway cable / secondary coupling.

RELEASE the jockey wheel assembly clamp.

LOWER the jockey wheel assembly fully.

RETIGHTEN the jockey wheel assembly clamp.

WIND the jockey wheel assembly anticlockwise until it starts to take the weight of the chipper.

GRASP the handle and release the catch with your thumb.

CONTINUE to wind the jockey wheel anticlockwise. This should lift the tow head clear of the ball hitch.

DRIVE the vehicle clear of the chipper.

WIND the jockey wheel assembly to a suitable point where the chipper is level.

THE chipper is now fully detached from the vehicle.

UNHITCHING THE CHIPPER

OPERATING INSTRUCTIONS 9

ENGINE CONTROLS

The engine speed is controlled by the vertically adjustable lever shown in diagram below. With the

throttle lever in the FAST position the machine is ready to chip. It MUST be pushed up as far as

possible to achieve a suitable working speed.

If no wood is to be chipped for a few minutes the throttle should be returned to the idle position.

DELIVERY

All Timberwolf 18/100G machines have a full pre - delivery inspection before leaving the

factory and are ready to use. Read and understand this instruction manual before attempting

to operate the Chipper. In particular, read pages 5-7 which contain important health and safety

information and advice.

OPERATOR’S PERSONAL PROTECTIVE EQUIPMENT REQUIRED

CHAINSAW safety helmet fitted with visor and

recommended ear defenders to an appropriate

specification.

HEAVY-DUTY work gloves with elasticated wrist.

CLOSE - FITTING heavy-duty non-snag clothing.

SAFETY footwear.

FACE MASK (if appropriate).

See page 5 for more detailed information.

Open fuel shutoff valve.

Pull choke handle out to “choke”

position.

Move throttle lever to “fast”. Always

operate engine with throttle in “fast”.

Push “on/off” rocker switch to “on”

position.

Grasp recoil rope handle. Pull

slowly until resistance is felt, then

pull rapidly to start engine and avoid

kickback.

Allow engine to warm up. In warm

weather temperatures or recently

operated conditions, move choke

handle slowly in towards the run

position. In cold weather, allow

engine to run smoothly before each

change. Operate with choke in “Run”.

STARTING THE ENGINE

THROTTLE

LEVER

CHOKE

FUEL

SHUTOFF

VALVE

ON / OFF

SWITCH

RECOIL

HANDLE

Altri manuali per TW 18/100G

Indice

Altri manuali Timberwolf Cippatrice

Timberwolf

Timberwolf TW 150DH Manuale utente

Timberwolf

Timberwolf TW 230VTR Manuale utente

Timberwolf

Timberwolf TW 18/100G Manuale utente

Timberwolf

Timberwolf TW 280TVGTR Manuale utente

Timberwolf

Timberwolf TW 150VTR Manuale utente

Timberwolf

Timberwolf TW 280TDHB Manuale utente

Timberwolf

Timberwolf TW 13/75G Manuale utente

Timberwolf

Timberwolf TW 280PHB (Petrol) Manuale utente

Timberwolf

Timberwolf Entec TW 190H Manuale utente

Timberwolf

Timberwolf TW 13/75G Manuale utente

Timberwolf

Timberwolf TW 160PH Manuale utente

Timberwolf

Timberwolf TW 230DHB Manuale utente

Timberwolf

Timberwolf TW 280TFTR Manuale utente

Timberwolf

Timberwolf tw pto 150h Manuale utente

Timberwolf

Timberwolf TW 18/100G Manuale utente

Timberwolf

Timberwolf TW 13/75G Manuale utente

Timberwolf

Timberwolf TW150DHB Istruzioni originali

Timberwolf

Timberwolf tw pto 150h Manuale utente

Timberwolf

Timberwolf TW 280FTR (Petrol) Manuale utente

Timberwolf

Timberwolf TW 230VTR Manuale utente

Timberwolf

Timberwolf TW190TDHB Manuale utente

Timberwolf

Timberwolf TW PTO/100G Manuale utente

Timberwolf

Timberwolf Entec 230DH Manuale utente

Timberwolf

Timberwolf TW190TR Manuale utente

Manuali Cippatrice popolari di altre marche

Craftsman

Craftsman 79964 Manuale utente

Frontier

Frontier WC1208 Manuale utente

Viking

Viking GE 150 Manuale utente

Victory

Victory WC-8H Manuale utente

GTM Professional

GTM Professional GTS 1300 Manuale utente

Yardbeast

Yardbeast YB3514 Manuale utente

Patriot

Patriot Electric Motors Manuale utente

Echo

Echo CH5540 Manuale utente

DOSKO

DOSKO 13-21T-13H Manuale utente

Craftsman

Craftsman 486.24516 Manuale utente

Garland

Garland 1480 TQG Manuale utente

Vermeer

Vermeer BC160XL Guida rapida

Value Leader

Value Leader z9400 Guida

Salsco

Salsco 600PTO Manuale del prodotto

Cub Cadet

Cub Cadet 24A-424M710 Manuale utente

Champion

Champion 91050 Manuale

Kellfri

Kellfri 13-WC17H2 Manuale utente

Salsco

Salsco 813XT Manuale del prodotto