TLS Electronics 875150 Manuale utente
User manual
875150
HDBaseT Set 100
HDMI USB RS232 IR
875150 HDBaseT Set 100 HDMI USB RS232 IR
Relens GmbH Contact: info@tls-electronics.de 2
Table of contents
Table of contents................................................................................................2
Safety and Notice ..............................................................................................3
Introduction........................................................................................................4
Applications .......................................................................................................4
System Requirements .......................................................................................4
Features.............................................................................................................5
Panel Description...............................................................................................6
Transmitter Front ............................................................................................6
Transmitter Rear.............................................................................................7
Receiver Front................................................................................................8
Receiver Rear.................................................................................................9
Connection Diagram........................................................................................10
Specifications................................................................................................... 11
Firmware Update:............................................................................................12
Package Contents ...........................................................................................13
Maintenance....................................................................................................13
Warranty Policy................................................................................................13
Limitations of Warranty....................................................................................14
Exclusive Remedies ........................................................................................14
RMA Policy ......................................................................................................15
Standard Replacement....................................................................................15
Once you have obtained an RMA number.......................................................15
Please note:.....................................................................................................16
Warranty..........................................................................................................16
Return and RMA Policies.................................................................................16
875150 HDBaseT Set 100 HDMI USB RS232 IR
Relens GmbH Contact: info@tls-electronics.de 3
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or
adjusting this product. Please keep this manual for future reference.
SURGE PROTECTION DEVICE RECOMMENDED
This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the life
of your equipment.
Safety and Notice
1) The transmission distances of HDMI over UTP cables are measured using
TE CONNECTIVITY 1427071-6
2)EIA/TIA-568-B termination for CAT cables is recommended for better
performance.
3) DO NOT use 568A/568B standard mixed CAT cable (cross-over cable)
because there are 2 pairs swapped, this will make POE OVER-CURRENT
and damage POE components. Please use straight-through CAT cable (both
RJ45 headers are 568A or 568B standard).
4) It is recommended that power up the device after connections of source, sink
and CAT cable.
5) To reduce the interference among the unshielded twisted pairs of wires in
CAT cable, do not run HDBaseT / Zone Cat5e/6/6a cabling with or in close
parallel proximity to mains power cables. Shielded CAT cables can be used
to improve EMI problems, which is worsen in long transmission.
6) Because the quality of the CAT cables has the major effect on how long the
transmission limit can achieve and how good is the received picture quality,
the actual transmission range is subject to one’s choice of CAT cables.
7) Do not substitute or use any other Power Supply other than the enclosed unit,
or a TLS approved Replacement Part. Doing so will void the warranty and
potentially expose the user to dangerous voltages resulting in an electrical
shock.
8) Do not disassemble the device for any reason. Doing so will void the
manufacturer’s warranty. Also, our unique case is an integral part of the
design of this unit and is responsible for cooling and circuitry shielding. Any
modifications to this case will potentially cause malfunction and product
failure.
9) Do not expose the device to water, moisture, or liquids. Possible electric
shock may result as well as failure of the unit to operate.
875150 HDBaseT Set 100 HDMI USB RS232 IR
Relens GmbH Contact: info@tls-electronics.de 4
Introduction
This Model allows HDMI signals to be transmitted over a Single CAT5e/6 cable.
This solution has the added features of RS232 and 2-way IR control
functionality over the same CAT5e/6 cable. It can extend 4K@60Hz YUV4:4:4
over a HDBaseT link and upto 100M.The slimmest HDBaseT design, making it
perfect to mount behind ultra thin TVs.
Note:
1) About POC
The POC function is designed for powering compatible TX or RX unit of TLS
ONLY. DO NOT connect it with any third party Power Over Ethernet
devices. Damage may result.
Applications
Household entertainment sharing and control
Lecture room display and control
Showroom display and control
Meeting room presentation and control
Classroom display and control
System Requirements
Input HDMI source equipment such as DVD/Blu-ray player,host PC/Laptop and
HDMI
Equipped output display (TV or monitor) with amplifier or active speakers.
875150 HDBaseT Set 100 HDMI USB RS232 IR
Relens GmbH Contact: info@tls-electronics.de 5
Features
Bandwidth up to 18Gbps, resolution up to 4K2K@60hz YUV 4:4:4
Transmit up to 150m under 1080p,100m under 4K
Support HDR10
Support KVM and USB2.0
Support Bi-directional wide band IR and RS232 Pass through
Support Dual POC (Receiver powered by transmitter or transmitter
powered by Receiver)
Support HDCP2.2/ HDCP1.4 Compliant
Support Copy local and remote EDID functionality
Supports audio extractor rate up to 192kHz
Support PCM7.1, Dolby, DTS
With micro USB port for firmware upgrade
875150 HDBaseT Set 100 HDMI USB RS232 IR
Relens GmbH Contact: info@tls-electronics.de 6
Panel Description
Transmitter Front
①IR In: Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line-of-sight of the equipment to be controlled.
②IR Out: Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line of sight of the equipment to be controlled.
③USB Type A for extension
④USB Type B for connection
⑤DIP Switch: Switch to“ 0 ”transmit upto 100m under 4K@60Hz.
Switch to“1”transmit upto 150m under 1080P@60Hz.(Before power on, TX and
RX must be selected to 0 or 1 at the same time. Please do not switch it in the
working process)
⑥EDID Switch: Switch to“0”copy EDID from display of receiver(remote EDID
mode).Switch to“1”copy EDID from loopout display of transmitter(local EDID
mode).
⑦Indicator of HDMI
⑧Indicator of power input
⑥Note: EDID copy function on transmitter do not support 150M long
distance, when it is long distance mode, the EDID only support 1080P@60Hz.
875150 HDBaseT Set 100 HDMI USB RS232 IR
Relens GmbH Contact: info@tls-electronics.de 7
Transmitter Rear
①DC 24V input
②Update: USB port to update the firmware
③RS232 in: Connect to a PC or laptop with phoenix terminal for
the transmission of RS232 commands
④HDBT out: Connect to the receiver unit with a single CAT5e/6 cable for
transmission of all data signals
⑤HDMI loop out: Connect to a HDMI equipped TV/Monitor for display of the
HDMI input source signal
⑥HDMI In: Connect to HDMI source equipment such as DVD or Blu-ray player
④Note: do not connect projector directly which will break HDBT port,
please contact us and require technical support for such application.
875150 HDBaseT Set 100 HDMI USB RS232 IR
Relens GmbH Contact: info@tls-electronics.de 8
Receiver Front
①IR Out: Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line of sight of the equipment to be controlled.
②IR In: Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line-of-sight of the equipment to be controlled.
③USB Type A for extension
④DIP Switch: Switch to“0”transmit upto 100m under 4K@60Hz.
Switch to“1”transmit upto 150m under 1080P@60Hz.(Before power on, TX
and RX must be selected to 0 or 1 at the same time. Please do not switch it in
the working process)
⑤Audio Switch: Switch to“0”extract Audio and output.Switch to“1”close
extraction Audio output(analog audio and SPDIF).
⑥Indicator of HDMI
⑦Indicator of power input
875150 HDBaseT Set 100 HDMI USB RS232 IR
Relens GmbH Contact: info@tls-electronics.de 9
Receiver Rear
①DC 24V input
②Update: USB port to update the firmware
③RS232 Out: Connect to the device that is to be controlled via phoenix terminal by
RS-232 commands
④HDBT in: Connect to the transmitter unit with a single CAT5e/6 cable for
transmission of all data signals
⑤HDMI output: Connect to a HDMI equipped TV/Monitor for display of the HDMI
input source signal
⑥SPDIF out
⑦Analog audio out
Indice
Altri manuali TLS Electronics Interruttore
