5
Pairing your instrument to a TME
Bluetooth Printer
You are able to print data (print header, time, date, temperature and barcode
information) directly from your instrument to a TME Bluetooth Printer. To do
this, you must firstly pair the two devices-
Discover the instrument and printer you wish to pair in the software.
When discovered, highlight the address of the instrument and printer and
press Link Printer to Instrument. This will pair the two devices together. To
check that the devices are paired, click the Read Printer Linked to
Instrument. The printer address will appear in the field below to indicate that
the devices are paired.
The devices are now ready for use.
Note: you can create a print header in the Setup tab.
Printing from your paired instrument and printer
You have the option of printing either the last reading or all data from the
instrument.
To print single data, firstly ensure that you printer is on and instrument is in
Bluetooth mode.
Press the Scale (SCL) button on the instrument. You will find that the display
will show the letter S release the button
The printer will print out your latest scan data
To print all data, press and hold the Scale (SCL) button. You will find that the
display will change from the letter S (single) to the letter A (all)
The printer will print out all your data.
