Toa DP-0206 Istruzioni per il montaggio
SOFTWARE INSTRUCTION MANUAL
DIGITAL PROCESSOR DP-0206
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
DACsys2000
Version 2.00
2
TABLE OF CONTENTS
1. Before installation ................................................................................... 3
2. Installation method ................................................................................... 4
3. Launching the application ................................................................................... 8
4. Main window ................................................................................... 9
5. Outline of the menu functions ................................................................................... 10
6. Unit operation ................................................................................... 13
7. Unit Viewer ................................................................................... 18
8. Memory Viewer ................................................................................... 20
9. Flow Viewer ................................................................................... 21
10. Contents Viewer ................................................................................... 23
11. Response Viewer ................................................................................... 38
12. Preset Memory ................................................................................... 41
13. Level Monitor Viewer ................................................................................... 42
14. Mute All Window ................................................................................... 43
15. Communications ................................................................................... 44
16. User Level ................................................................................... 46
17. Prohibition Settings ................................................................................... 48
18. Print ................................................................................... 50
19. Export ................................................................................... 51
20. DQ-C01 Settings ................................................................................... 52
21. Supplement ................................................................................... 60
22. Specifications ................................................................................... 62
3
1. Before installation
DACsys 2000 is software created to allow you to change settings for the DP-0206.
This setting software can be used in the following environments: Microsoft Windows
95/Windows 98/Windows ME/Windows NT Ver. 4.0/Windows 2000.
The format for the floppy disk is 1.44 megabytes (MS-DOS format for IBM compatibles).
Make sure your machine is an IBM compatible capable of formatting 3.5-inch floppy disks at
1.44 megabytes (MS-DOS format). This software will not operate on a machine that operates
under a different format.
4
2. Installation method
There are two installation disks (labeled Disk 1 of 2 and Disk 2 of 2).
Proceed with installation as follows:
Be sure to close any applications that are running before beginning the installation process.
1. Click the button on the
screen and select Settings →
Control Panel. The window shown
at right will appear.
2. Double-click the icon
in the Control Panel window to
display the window shown at right.
5
3. Click . The window
shown at right will appear.
4. At this point, insert the system disk (Disk 1 of 2) in the floppy-disk drive and click
.
5. The system will search the setup
program, and the window shown at
right will appear. Then click
.
6. During the preparation for
installation, the window shown at
right will be displayed.
6
7. If the window shown at right
appears, carefully read the
information in the window and then
click .
8. Carefully read the information in
the window and then click
.
9. If the window shown at right
appears, remove the disk (Disk 1
of 2) from the drive and insert Disk
2 (Disk 2 of 2), then click “OK”.
7
10. If the message indicating
completion of setup appears, click
.
8
3. Launching the application
To launch the application once it has been installed, follow either of the two procedures
described below:
1. Create a desktop shortcut and launch the application by clicking its icon.
Drag the icon DACsys 2000 (which will be displayed immediately when installation is
completed) with the mouse while holding the Ctrl key pressed and drop it onto the desktop (to
copy the icon). This will set it up as a shortcut on your desktop. Then launch the application
by double-clicking this shortcut icon.
2. Proceed in steps from the Windows Start button.
Click on the screen the select Program →TOA Digital Audio Control →DACsys2000
to launch the application.
9
4. Main window
The window shown below will appear when the application is launched.
Unit Viewer
Memory Viewer
Flow Viewer
Contents Viewer
Status Bar
Menu Bar
Toolbar
10
5. Outline of the menu functions
File
New... : Creates (sets) a new data file
Open... : Opens an already existing data file
Save : Saves the data file in use on a disk
Save As... : Saves the data file in use on a disk under a different name
Export... : Exports the data of the active document as the Microsoft
Excel data. The menu regarding the export appears only
when the Microsoft Excel is installed in the PC.
Page Settings... : Changes the print margin.
Print... : Prints the active document
Print Preview... : Displays full pages
Exit : Closes the application
Edit
Undo : Undoes the last action
Redo : Redoes the previously undone action
Cut : Saves the setting value in the box in which the cursor is
located on the clipboard and restores the initial value
Copy : Copies the setting value in the box in which the cursor is
located on the clipboard
Paste : Pastes the data on the clipboard into the box in which the
cursor is located
Clear : Restores the setting value in the box in which the cursor is
located to the default value
Swap Gain < - > C/G : Makes the Gain and C/G boxes trade positions
Filter Type
è PEQ : Changes the box in which the cursor is located to a PEQ box
(with the default setting for PEQ)
è GEQ : Changes the box in which the cursor is located to a GEQ box
(with the default setting for GEQ)
è Filter : Changes the box in which the cursor is located to a Filter box
Split
è PEQ+Filter : Filter is divided into PEQ and Filter
è GEQ+Filter : Filter is divided into GEQ and Filter
è Filter+Filter : Filter is divided into Filter and Filter
Merge : Unites with one Filter
Altri manuali per DP-0206
3
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Toa Software
Manuali Software popolari di altre marche
PS Audio
PS Audio PowerPlay Manuale del proprietario
Brady
Brady LOCKOUT PRO 3.0 Manuale di servizio
Avaya
Avaya Interaction Center Manuale utente
Texas Instruments
Texas Instruments TI-83 Plus Silver Edition Manuale
Novell
Novell GROUPWISE 8 - INTERNET AGENT Manuale utente
Oracle
Oracle Application 9i Manuale utente
Acer
Acer RDM Manuale utente
Canon
Canon Vixia HF21 Manuale utente
Canon
Canon ZR950 Manuale utente
Samsung
Samsung Auto Backup Manuale utente
Polycom
Polycom Vortex EF2201 Istruzioni per l'installazione e il funzionamento
Brocade Communications Systems
Brocade Communications Systems Brocade 8/12c Manuale utente