Toguard H40 Manuale utente

H40 Trail Camera

Instruction Manual

V1219

1.PACKING LIST

2.INSTRODUCTION

3.STRUCTURE

4.PREPARING THE CAMERA

5.USING THE CAMERA AND SETUP MENU

5.1 Using the camera

5.2 Setup menu

6.ENTERING AUTOMATIC MONITORING

6.1 Adjusting and installing the camera

6.2 Setting up the live mode

7.CONNECTION TO COMPUTER

8.TECHNICAL SPECIFICATION

9.SIMPLE TROUBLESHOOTING

9.1Care

9.2Storage

Contents

..............................................................................0 1

........................................................................0 1

...............................................................................02

...................................06

........................................................04

...........................................................................07

.....................................................................06

.....................................1 3

.............................................1 3

.............................................................1 5

..................................................1 6

....................................................1 7

...................................................1 8

......................................................................................1 9

........................................................................................1 9

1. PACKING LIST

Please carefully unpack camera and check that below accessories are

contained in the box.

1.Wildlife Camera x 1

2.USB cable x 1

3.Instruction Manual x 1

4.Mounting Belt x 1

5.Wall Mount x 1

6.Screws x 3

1 2 3 4

5 6

2. INTRODUCTION

The Wildlife Camera is a wildlife and surveillance camera with an infrared

sensor. The sensor can detect sudden changes to the ambient

temperature within an evaluation area. The signals of the highly sensitive

infrared sensor (PiR, passive infrared sensor) switch on the camera,

activating picture of video mode.

2.1 Features Of Wildlife Camera

1. CMOS sensor.

2.14Megapixels photo and 1080P HD video.

3.6.1 cm (2.4’)’ color TFT LCD: 480 x 234 pixels

4.42 pcs IR LEDs.

5.Full automatic IR filter, color photo and video in day and black night.

6.Trigger speed: Approx. 0.5 second.

7.Setup Serial No. to record the position.

8.Time, date, temperature, phase and Serial No. will be stamped on the

photo.

9.Password protection.

10.Power indicating.

11.Built-in test function about environmental temperature.

12.Built-in microphone and speaker.

13.Mini USB 2.0 interface.

14.Waterproof standard IP56.

15.Working temperature: -20°C to 60°C.

16.Extremely low power consumption in standby operation providing

extremely long operating time, lasts 6 months with 8 pcs batteries

when taking 50 pcs photos every day.

2.2 Features Of Wildlife Camera

1.Camera trap for hunting

2.Animal or incident observation.

3.Motion triggered security camera for domestic, office or public use.

4.Any internal and external surveillance.

3. STRUCTURE

Understanding the camera structure helps to use this product more skillfully.

1.Infrared LEDs

2.Lens

3.Front motion sensor

SHO T

AV ON-S ETU P-O FF

13 14 15 16 17 18

4.Display screen

5.Upbutton

6.Menu button

7.Left button

8.Replay button

9.Shot button

10.Right button

11.OK butto

12.Down button

13.TF Slot

14.AV jack

15.Usb jack

16.ON

17.SETUP

18.OFF

19.Battery compartment

20.Seal ring

21.DC connection 6V/1.5A

22.1/4" Tripod thread

23.Locking brackets

24.Slot for mounting belt

▲ 1.The monitor is only switched on in the SETUP mode for changing

menu settings or viewing existing photos and videos.

2.A micro SD memory card must have been inserted into the memory

card slot to save photos and videos.

3.Using the mini USB connection (USB 2.0), the camera can be

connected to a computer to download photos and videos.

4.Using the mode switch, the three operating modes:OFF,SETUP and

ON can be selected.

4. PREPARING THE CAMERA

Note :

1.Micro SD memory cards up to a capacity of 32 GB are supported.

2.Instead of type LR6 (AA) batteries with the same specification (with

2000 mAh or higher) may be used. We recommend NiMh batteries

with low self discharge (not supplied).

3.The camera must be inserted 4 or 8 x 1.5V AA batteries . Do not use

new and old batteries together. DC interface need 6V/1.5A adaptor

with 3.5 mm (outer diameter) *1.3 mm (inner) plug head.

4.Insert CLASS6 or higher class micro SD card (CLASS10 recommend).

Prior to insert into memory card, ensure that the lateral write protection

on the memory card has not been locked.

5.Switch on the camera. 3 switches: power off (OFF),setup menu

/SETUP mode (SETUP)and live mode (ON).

6.New memory card is recommended to be formatted when using (as

below described).

7.Please note that the camera will power off when power is very low.

SHOT

AV ON-S ETUP- OFF

AALR6

ON -S ETU P-OF F

Settings

Time&date

Photo stamp

Password protection

Beep sound

Format memory card

Serial NO

MEN U Back OK Select

Settings

Time&date

Photo stamp

Password protection

Beep sound

Format memory card

Serial NO

MEN U Back OK Select

Notiﬁcation:All data

will be deleted

Yes

Operation (See Figures Below)

Open the locking brackets and the protective cover of the battery

compartment - insert batteries -insert memory card—switch to

SETUP—enter system menu by pressing MENU button-choose to format

memory card—choose to reset to factory.

(this step can be skipped)—choose to setup system time.

Open the battery cover ► Insert 8pcs batteries. Battery model:

AALR6 > Ensure that the lateral write protection on the memory card has

not been activated > Insert CLASS6 or above Micro SD memory card in

the memory card slot before switching on the camera and select SETUP

mode to adjust settings

Assembly With Strap

5. USING THE CAMERA AND SETUP

5.1 Using The Camera

1.Operating Buttons

Functions of operating buttons in recording mode:

Below, the operating buttons are described in the recording mode with

non-activated menu.

1. UP Key: Page up (Menu mode): Switch to Video recording mode

2. MENU: Open or exit this Setting menu/Stop playing video (Replay Mode)

3. Left Key: Page left

4. Replay Key: Review photos and videos

5. SHOT Key: shot video recording/capturing

6. Right Key: Page right

7. OK: Play/Pause play video files (Replay mode)

8. Down Key: Page down(Menu mode)/Switch to Photo mode.

Indice

Lingue:

Altri manuali Toguard Telecamera da ricognizione

Toguard

Toguard H70 Manuale utente

Toguard

Toguard H70A Manuale utente

Manuali Telecamera da ricognizione popolari di altre marche

Nestbox

Nestbox C13 Manuale utente

Wildview

Wildview STC-TGL1 Manuale utente

Stealth Cam

Stealth Cam CORE STC-Z3IRTL Manuale utente

Suntek

Suntek HC-800M Manuale utente

Spypoint

Spypoint G4 Manuale utente

Duramaxx

Duramaxx 10029765 Manuale utente

Brecom

Brecom C2400 Manuale utente

BlazeVideo

BlazeVideo A280W Manuale utente

Bestok

Bestok 5210GM Manuale utente

GardePro

GardePro X60P Manuale utente

Delta-Opti

Delta-Opti HC-SG880MK-18MHD Manuale utente

PNI

PNI HUNTING 280C Manuale utente

Muddy

Muddy Pro-Cam 14 Manuale utente

Bresser

Bresser 3310006 Manuale utente

Recon Outdoors

Recon Outdoors HS410 Manuale utente

Braun

Braun 57660 Manuale utente

Wildgame

Wildgame Shadow Manuale utente

Spypoint

Spypoint FLEX Manuale utente