ToolKitRC M6D Manuale utente
@ ToolkitRC 2020
1
M6D
Manual V1.0
2020.04
www.toolkitrc.com
ToolkitRC Technology (Shenzhen) Co.. Ltd
@ ToolkitRC 2020
2
Introduction
Thank you for purchasing the ToolkitRC M6D
multi-function charger, please read this manual carefully
before use.
Key Points
Tips
Important
Information
Further information
To ensure you have the best experience with this
product please scan the QR code below to stay up to
date with news, information and firmware updates for
your charger. Or visit www.toolkitrc.com
WeChat QR Code
@ ToolkitRC 2020
3
Safety
1，M6D allows input voltage of 7-28V. Please
ensure that the power supply voltage is in line with this
range. Pay attention to the positive and negative
polarities of the power supply when connecting.
2，Do not use this product in a hot area or near a heat
source. Do not use this product in a damp, flammable
or explosive gas environment.
3，Only use this product while under direct supervision.
No not leave charging batteries unattended.
4，When not using this product, please unplug the
input power in time.
5，When using the charging function, please set the
current matching with the battery. Don’t set excessive
current charging, so as not to damage the battery.
@ ToolkitRC 2020
4
Contents
Introduction.......................................................... 2
Key Points............................................................. 2
Further information............................................. 2
Safety..................................................................... 3
Contents................................................................4
M6D Layout.......................................................... 8
Quick start.............................................................9
Charge and discharge settings....................... 11
1，Battery type...................................................11
2，Number of cells........................................... 14
3，Mode............................................................. 15
4，Discharge mode.......................................... 16
5，Input MaxVoltage........................................17
6，End voltage（TVC）...................................18
7，Current setting.............................................20
8，NiMH setting (PeakV)................................. 21
@ ToolkitRC 2020
5
9，Loop setting................................................. 22
10，Power mode setting..................................24
11，Smart battery.............................................. 24
Charge and discharge work............................ 26
System settings.................................................. 31
other functions...................................................35
Specification....................................................... 37
@ ToolkitRC 2020
6
Product description
M6D is a dual-channel balanced charger product.
Small size, high power density, innovative design,
charging accuracy can be as low as 5mV..
Charge, discharge and balance management of
LiPo, LiHV, LiFe Lion 1-6S, NiMh 1-16S, PB 1-10S
batteries.
Charging current：
Synchronous mode maximum 25A@MAX500W
Asynchronous mode maximum 15A@MAX250W
Discharge current：
Recycle mode maximum 15A @250W *2
Normal mode maximum 3A @12W *2
Lithium battery cut-off voltage can be set (TVC
function).
Constant current and constant voltage output,
customizable 1-28V constant voltage, 1-15A
constant current.
Can be adapted to mainstream UAV batteries,
automatically activated and charged.
Multi-language system, can arbitrarily upgrade the
required language.
@ ToolkitRC 2020
7
USB [email protected]V output, rechargeable mobile
device.
The device connects to PC like a USB drive for easy
firmware upgrades. Simply copy and paste new
firmware files to update.
@ ToolkitRC 2020
8
M6D Layout
Front
Back
Display
Scroll wheel
Turn: left or right
Press: OK
Main port
Balance port
Input port
Cooling fan
USB Output
&upgrade
Exit key
CH key
Temp. Sensor Port
@ ToolkitRC 2020
9
Quick start
1，Connect a 7-28V power supply or input battery to
the input port on the back of the M6D.
2，The display shows the boot logo and stays for 2
seconds.
3，At the same time accompanied by do-re-mi's boot
sound.
4，After booting, the display will enter the main
interface and display as follows:
5，Short press [Exit], the cursor switches between the
left and right channels.
6，Press and hold [EXIT] to start testing the internal
resistance of the corresponding channel. After the test,
the internal resistance will be displayed.
7，Scroll [Scroll Wheel] to switch the pages in the
@ ToolkitRC 2020
10
corresponding channel.
8，Short press [OK], can select the charging task when
the channel is idle and can adjust and end the work
when the channel is working.
9，Press and hold [OK] to enter the system setting
interface when both channels are idle.
10，Press [Exit], to end the modification or return to the
previous interface.
=================================
1，Short press [Scroll Wheel] once，to confirm the
key function
2，Press and hold [Scroll Wheel] for 2 seconds，to
delete the key function
3，If any key is operated successfully, there will be a
di-di prompt tone.
=================================
Indice
Altri manuali ToolKitRC Caricabatterie per batterie
ToolKitRC
ToolKitRC C6 Manuale utente
ToolKitRC
ToolKitRC M7AC Manuale utente
ToolKitRC
ToolKitRC C3 Manuale utente
ToolKitRC
ToolKitRC Q4AC Manuale utente
ToolKitRC
ToolKitRC C4 Manuale utente
ToolKitRC
ToolKitRC Q6AC Manuale utente
ToolKitRC
ToolKitRC M8 Manuale utente
ToolKitRC
ToolKitRC M8 Manuale utente
ToolKitRC
ToolKitRC M9 Manuale utente
ToolKitRC
ToolKitRC M4Q Manuale utente
