ToolKitRC M8 Manuale utente

@ToolkitRC 2019

Manual V1.4

2019.01

www.ToolkitRC.com

ToolkitRC Technology (Shenzhen) Co., Ltd.

@ToolkitRC 2019

Introduction

Thank you for purchasing the M8 model toolchain.

Please read this manual carefully before use.

Key Points

Tips

Important

Information

Further information

To ensure that you have a more enjoyable experience,

Scan the QR code below and pay attention to obtaining

details of the use of this product, video teaching and the

latest information before using it. Information

@ToolkitRC 2019

Safety

1, M8 allows input voltage 10-30V, to ensure that the

power supply voltage is consistent, pay attention to

the positive and negative polarity of the power

supply.

2. Do not use this product in heat, moisture,

flammable or explosive atmospheres.

3. Please use this product under supervision to

prevent accidents.

4. When not in use this product, please unplug the

input power in time.

5. When using the charging function, please set the

current matching with the battery. Do not set the

battery to charge too much, so as not to damage

the battery.

@ToolkitRC 2019

Contents

Introduction.................................................... 2

Key Points........................................................2

Safety............................................................... 3

M8 Layout....................................................... 6

Quick start....................................................... 7

Charge and discharge...................................9

1，Battery type setting.................................. 9

2，Cutoff voltage setting（TVC）............11

3，NiMH Setting（PeakV）.......................11

4，Battery Setting........................................12

5，Current setting....................................... 13

6，Working mode....................................... 15

Battery Measurement..................................24

ESC measurement....................................... 26

Signal output................................................ 27

Power output................................................30

Drone charging............................................ 32

System settings.............................................34

Other functions............................................ 37

Specification..................................................39

@ToolkitRC 2019

product description

M8 is a charge and discharge instruments

multifunctional model tool chain Product that

integrates balance charging/discharging, power

meters,electro-display, signal gauges, signal sources

and other functions.

• Lipo, LiHV, LiFe 1-8S,NiMh 1-20s,PB 1-12s battery

charging and discharging and balance management

•Charging current: Maximum 15A @300W

•Discharge Current: Recovery MAX 15A@300W

normal mode MAX 3A @12W

•Lithium battery full voltage can be set (TVC)

• can measure battery voltage, battery internal

resistance, lithium battery balance management

• Electrically adjustable power meter, simultaneous

output voltage and throttle signal

• Measurement of signal values such as

PWM/PPM/SBUS with accuracy of up to 1us

• can output PWM/PPM/SBUS standard signal,

accuracy up to 1 microseconds

• constant current constant pressure source output,

can customize 1-30v constant pressure, 1-15A

constant current

• can be adapted to the mainstream UAV battery,

automatically activated and charged.

•USB [email protected] output, rechargeable mobile device.

•Device simulation for USB flash drive, copy upgrade

file to achieve product firmware upgrade

•Device simulation for USB flash drive, copy upgrade

file to achieve product firmware upgrade

@ToolkitRC 2019

M8 Layout

Front

back

Display

Jog wheel

Output

Balance

Port

Cooling

Input

Cooling

USB

Servo Port

@ToolkitRC 2019

Quick start

1, The 10-30V power supply is connected to the

input port on the back of the M8

2, The display shows the bootup logo and stays

for 2 seconds

3, Accompanied with do-re-mi bootup sound

4, the bootup is completed, the display enters

into the main interface as shown below

5, Rotate the Jog wheel, move the cursor to

select function, press the button on knob to

enter the selected function and enter the

corresponding interface

6. After entering the related function interface,

rotate the Jog wheel to move the cursor to

select the setting item or value, press the Jog,

and modify the option or value. After the

modification is completed, press the Jog

@ToolkitRC 2019

wheel to confirm.

7. Press the Escape key to end the modification

or return to the previous screen.

=================================

1, short press the jog once, to determine

the key function

2, press and hold the jog for 2 seconds, as

the delete key function

3, turn the jog or press any button, there

are sound prompts

=================================

@ToolkitRC 2019

Charge and discharge

After selecting the [Charge] function on the main

interface, press [OK] to enter the charging function,

the following interface is displayed.

1，Battery type setting

Rotate the Jog wheel, move the cursor, select the

battery that has been set, or create a new battery,

press [OK] to enter the battery setting interface, as

shown below.

Move the cursor to [Lipo] and press [OK] to modify

the battery type. The charger supports charging and

discharging five types of batteries: Lipo, LiHV, LiFe,

@ToolkitRC 2019

NiMh, PB. After selecting the the correct battery that

matches the actual battery. Short press [OK] and

[Exit] Effective.

=================================

Important：

1, Incorrect battery type charging may

damage the battery, charger, and may lead

risk of burning, etc., please be double careful.

2, battery that cannot be indicated the

battery type, pls do not use this product to

charge

=================================

Information:

1, Lipo: often referred to as lithium polymer

battery, nominal voltage 3.70V, fully

charged 4.20V battery

2, LiHV: often referred to as high-voltage

lithium battery, nominal voltage 3.85V,

4.35V battery after full

3, LiFe: often referred to as iron-lithium

battery, nominal voltage 3.30V, fully

charged 3.60V battery

4, NiMh: Often called nickel-metal hydride

battery, nominal voltage 1.20V

5, PB: often referred to as lead-acid battery,

nominal voltage 2.00V

Altri manuali per M8

Indice

Altri manuali ToolKitRC Caricabatterie per batterie

ToolKitRC

ToolKitRC Q4AC Manuale utente

ToolKitRC

ToolKitRC M4Q Manuale utente

ToolKitRC

ToolKitRC M8 Manuale utente

ToolKitRC

ToolKitRC M6 Manuale utente

ToolKitRC

ToolKitRC M6D Manuale utente

ToolKitRC

ToolKitRC M7 Manuale utente

ToolKitRC

ToolKitRC C3 Manuale utente

ToolKitRC

ToolKitRC M9 Manuale utente

ToolKitRC

ToolKitRC Q6AC Manuale utente

ToolKitRC

ToolKitRC C4 Manuale utente

ToolKitRC

ToolKitRC M6DAC Manuale utente

ToolKitRC

ToolKitRC M7AC Manuale utente

ToolKitRC

ToolKitRC M4 Pocket Manuale utente

ToolKitRC

ToolKitRC C6 Manuale utente

Manuali Caricabatterie per batterie popolari di altre marche

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Manuale utente

Enelion

Enelion Vertica Manuale utente

RCA

RCA CHU6 Manuale utente

ANSMANN

ANSMANN ALCT 6/24-10 Manuale utente

Hitachi

Hitachi UC 18YRSL Guida alla risoluzione dei problemi

Olympus

Olympus B-20 LPC Manuale utente

Exibel

Exibel ZH1708143 Manuale utente

Lenmar

Lenmar Mach 1 Manuale utente

CTEK

CTEK MXS 5.0 Manuale utente

ABB

ABB HT842379 Manuale utente

Nitecore

Nitecore Superb Charger SC4 Manuale utente

Renogy

Renogy RBC2125DS-21W Manuale utente

Braun

Braun BWC02M Manuale utente

CTEK

CTEK MXS 3.6 Manuale utente

Black & Decker

Black & Decker BDV090 Manuale utente

Trinity

Trinity DPD Manuale utente

Hulkman

Hulkman Sigma 1 Manuale utente

IKEA

IKEA koppla Manuale utente