Topcon Compu-Vision CV-5000 Istruzioni operative

REPAIR MANUAL

ISSUED ...............APR. 2007

REVISED.............

COMPU-VISION

CV-5000

TOPCON CORPORATION

R-CV5000-0-0704-01

CONTENTS

Page

1. OUTLINE.................................................................................................................................... 1

1-1 Features of Product.............................................................................................................. 1

1-2 Operation Principle............................................................................................................... 1

1-3 Specifications of Product...................................................................................................... 1

1-4 Target Users of This Repair Manual ..................................................................................... 2

1-5 How to Use This Repair Manual........................................................................................... 3

1-6 Cautions............................................................................................................................... 4

2. PRODUCT OUTLINE ................................................................................................................. 5

2-1 Nomenclature....................................................................................................................... 5

2-2 Optical Arrangement and Names ......................................................................................... 6

2-3 Electrical Wiring Diagram..................................................................................................... 7

3. REPAIR ...................................................................................................................................... 8

3-1 Disassembly and Assembly Procedures............................................................................... 8

3-2 Names of PCB................................................................................................................... 15

3-3 Specifications of Switches.................................................................................................. 18

3-4 Names of Motors and Sensors........................................................................................... 20

3-5 Trouble Shooting................................................................................................................ 22

3-6 Assembly and Adjustment Procedures............................................................................... 43

3-7 Version up of software........................................................................................................ 48

3-8 Replacement of the PCB for the near-point illumination LED.............................................. 53

4. TOOLS..................................................................................................................................... 55

4-1 Special Tools...................................................................................................................... 55

4-2 General Tools..................................................................................................................... 56

R-CV5000-0-0704-01

−1 −

1. OUTLINE

1-1 Features of Product

This instrument is a refractor and the lenses having a variety of power are built in it to measure the refraction

of eyes. This instrument is used to measure the correction quantity of refraction and to perform the

binocular function test according to the answers of the patient. The lenses built in this instrument are

changed by the accessory controller or the commercial personal computer to which the special software is

installed.

1-2 Operation Principle

On a disk built in the instrument, the lenses with a variety of power are arranged. By turning the disk, the

lenses are changed to each other. There are two or more disks in the instrument. So, measurement of

different types can be carried out by combining the disks.

1-3 Specifications of Product

1-3-1 Specifications by items

•Spherical power:

Measuring range +27.00 ~ -27.00D

Measuring step 0.25D/3.00D

•Astigmatic power:

Measuring range +8.00 ~ -8.00D

Measuring step 0.25D/1.00D

•Cylinder axis:

Measuring range 0 ~ 180°

Measuring step 1°/5°/15°

•Prism power:

Measuring range 0 ~ 20∆(all directions)

Measuring step 0.1∆/0.5∆/1.0∆

•Pupillary distance:

Setting range 48 ~ 80mm

Setting step 0.5mm/1mm

•Cross cylinder:

Jackson Cross ±0.25D/±0.50D

Auto Cross ±0.25D

•Test lens (Auxiliary lens):

Red-Green filter

Polarized filter (45°/135°)

Prism (6∆/10∆)

Red Maddox (horizontal/vertical)

Lens for retinoscopy (+1.5D/+2.0D)

Cross cylinder for measuring presbyopia (±0.5D)

Occluding plate

R-CV5000-0-0704-01

−2 −

Pinhole

Cross hairs glass

•Standard wearing distance: 12mm, 13.75mm, 16mm, 18mm, 20mm

•Convergence: Near-point distance 40/67cm (Minimum pupillary distance to

enable convergence at the near point 40cm: 53mm)

•Forehead rest adjustment range: 15mm

1-3-2 Other specifications

•Horizontal adjustment: 4° or more in right and left

•Tilt for near point: 30°

•Near-point illumination: White LED

•Input of objective data/CL data: Input the measurement data of RM or CL into CV.

•Remote control of ACP-8/MC-3/PC-2: Remote control ofACP-8, MC-3 or PC-2 is possible.

•Electric rating:

For Japan Power supply voltage: AC100V, Frequency: 50-60Hz

For export Power supply voltage: AC100-240V, Frequency: 50-60Hz

Power supply input: 90VA

•Dimensions and weight:

Dimensions: 294 ~ 328mm (W) × 115mm (D) × 261mm (H)

Weight: 4kg

Types of protection against electric shocks: Class I equipment

Degree of protection against electric shocks: Type B applied part

1-4 Target Users of This Repair Manual

Only the service engineer having experience in assembling and adjusting ophthalmic instruments must repair

this instrument. For others, it is recommended to take the repair training lessons of TOPCON

CORPORATION.

R-CV5000-0-0704-01

−3 −

1-5 How to Use This Repair Manual

When performing the inspection or when inspecting, adjusting or repairing the instrument for its trouble,

follow the flow chart shown below.

R-CV5000-0-0704-01

−4 −

1-6 Cautions

(1) Before replacing a connector or PCB, turn off the power.

(2) When a PCB malfunctions, replace it as a PCB unit.

Replaceable PCB Part No.

1. MAIN PCB 43221 51000

2. L PCB 43221 52000

3. R PCB 43221 53000

When you replace the MAIN PCB, remove E²PROM from the old PCB and install it to the new PCB.

(3) When the screw lock is used for a screw, dissolve the screw lock with Isoamyl acetate and then remove

the screw.

(4) Use the screw lock (THREE-BOND 1401B) for screws.

(5) When assembling, install the parts in the reversed procedure of disassembly.

(6) Refer to “Assembly andAdjustment Procedures” for adjustment in repair and assembly.

R-CV5000-0-0704-01

−5 −

2. PRODUCT OUTLINE

2-1 Nomenclature

No.

Name Function

Examination window The patient’s eyes are observed through this window, and the display

lenses are set here.

Corneal aligning window The position of the patient’s cornea is seen through this window.

Forehead rest knob Adjusts the forehead in the back-and-forth direction.

Leveling knob Levels the instrument.

Near-point rod holder The near-point rod is inserted and attached here.

Near-point rod clamp screw Fixes the near-point rod.

Forehead rest The patient’s forehead rests here.

Cornea alignment scale Measures the cornea vertex position.

Power connection cord This cord connects the instrument to the power supply.

Level Indicates the standard position for the level adjustment.

Cornea illumination Brightens the anterior eye segment to check the PD easily even during

optometry in a dark room.

Chart illumination LED Illuminates the near-point chart.

Tilt fixing lever for near point Adjust the tilt for near-point test.

R-CV5000-0-0704-01

−6 −

2-2 Optical Arrangement and Names

No.

Name Function

Cover glass at the patient side Prevents eyelashes, dust, etc. from contacting the lens.

Spherical lens No. 3 This is a group of high power spherical lenses.

Spherical lens No. 2 This is a group 2 of low power spherical lenses.

Spherical lens No. 1 This is a group 1 of low power spherical lenses.

Cylindrical lens No. 2 This is a group of high power cylindrical lenses.

Cylindrical lens No. 1 This is a group of low power cylindrical lenses.

Auxiliary lens group This is a group of lenses for correcting errors when combining a high

power spherical lens with a cylindrical lens.

Prism: CC lens group 2 It is possible to combine the prism lenses of 20∆~ 0 ~ 20∆.

: Cross cylinder lens of ±0.25D/0.50D

Prism: CC lens group 1 It is possible to combine the prism lenses of 20∆~ 0 ~ 20∆.

: Cross cylinder lens of ±0.25D/0.50D

Cover glass at the inspector side Prevents dust.

Cornea alignment cover glass

(at the patient side) Prevents dust.

Cornea alignment scale Shows the cornea position.

Cornea alignment mirror Used to see the cornea position from the front of the instrument.

Cornea alignment cover glass

(at the inspector side) Prevents dust.

Patient’s eye

R-CV5000-0-0704-01

− 7 −

2-3 Electrical Wiring Diagram

R-CV5000-0-0704-01

−8 −

3. REPAIR

3-1 Disassembly and Assembly Procedures

3-1-1 Removal of PD cover

Illustration

Procedure

1. Remove the screw covers and the two screws CR3 × 6SCr

. Then, remove the connector

cover.

2. Remove the screw covers and the two screws CR3 × 6SCr

. Then, remove the PD cover

at inspector side.

3. Remove the two screws CR3 × 6SCr

and then remove the near-point rod holder.

4. Remove the screw 6SU3 × 3SCr

and then remove the forehead rest knob.

5. Remove the tilt fixing lever.

6. Remove the two screws CR3 × 6SCr

and then remove the PD cover at patient side.

Note: When installing the PD connector cover, put the cable into the cover’s groove.

Tilt fixing lever

Near

point rod holder

PD cover at patient side

Forehead rest knob

PD connector cover

Screw cover

PD cover at inspector side

R-CV5000-0-0704-01

Altri manuali per Compu-Vision CV-5000

Indice

Altri manuali Topcon Attrezzature da laboratorio

Topcon

Topcon ALADDIN Manuale utente

Topcon

Topcon TRC-NW300 Manuale utente

Manuali Attrezzature da laboratorio popolari di altre marche

Qiagen

Qiagen DML 3000 Manuale utente

Queensgate

Queensgate NANOSCAN OP400 Manuale di programmazione

Conviron

Conviron GEN1000-GE Manuale utente

Parr Instrument

Parr Instrument 4560 Manuale di istruzioni

IKA

IKA IC control Manuale utente

Integra

Integra DOSE IT Manuale utente

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuale utente

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuale utente

NI PXI-5422 Manuale

Collomix

Collomix Aqix Manuale utente

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente

Ocean Insight

Ocean Insight FLAME-NIR+ Manuale utente

Parker

Parker ALIGN-MG-NA Manuale utente

BD 644787 Manuale utente

DENTAURUM

DENTAURUM Compact Megaplus Manuale utente

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuale utente

VWR

VWR SAS Super IAQ Manuale utente

illumina

illumina MiSeqDx Manuale utente