Topdon ArtiLink300 Manuale utente
Hotline (+86)0755-23576169
Email [email protected]
Website www.topdondiagnostics.com
Facebook @TopdonOcial
Twitter @TopdonOcial
If you have any questions or doubts, please contact
us via
PS
E
ArtiLink300
Code Reader
USER MANUAL
Content
Welcome ......................................................................................1
About............................................................................................1
Package List................................................................................1
Compatibility ...............................................................................1
Notice...........................................................................................1
General Information of OBDII (On-Board Diagnostics II).......... 2
Diagnostic Trouble Codes (DTCs) .............................................. 2
Features.......................................................................................3
Operation Introduction................................................................ 4
Technical Specication.............................................................17
Warranty ...................................................................................17
Warnings....................................................................................18
Cautions.....................................................................................18
FAQ.............................................................................................19
-1-
Thank you for purchasing TOPDON OBD2 scan tool ArtiLink 300.
Please patiently read and understand this User Manual before
operating this product.
About
As designed to work with all OBDII compliant vehicles, including
Controller Area Network (CAN), TOPDON ArtiLink 300 supports all
10 modes of OBDII test for a complete diagnosis. It enables users
to Read/Clear DTCs, run I/M Readiness test, check Live and Freeze
Frame Data etc., with built-in help menus and code denitions.
Package List
1.ArtiLink 300
2.Quick Start Guide
3.User Manual
Welcome
Compatibility
TOPDON ArtiLink 300 is compatible with following protocols:
• KWP2000
• ISO9141
• J1850 VPW
• J1850 PW
• CAN (Controller Area Network)
Notice
ArtiLink 300 may automatically reset while being disturbed by
strong static electricity. THIS IS A NORMAL REACTION.
-2-
Diagnostic Trouble Codes (DTCs)
General Information of OBDII (On-Board
Diagnostics II)
The OBDII system is designed to monitor emission control
systems and key engine components by performing either
continuous or periodic tests of specific components and
vehicle conditions, which will offer three pieces of such
valuable information:
1. Whether the Malfunction Indicator Light (MIL) is
commanded “on” or “off”;
2. Which, if any, Diagnostic Trouble Codes (DTCs) are stored;
3. Readiness Monitor status.
-3-
ArtiLink300CodeReaderUserManual
Features
▼
▲
1. LCD - Show test results.
2. OK - To conrm the current operation.
3. EXIT - Back to the previous page.
4. - Move down for selection. Or skip to the next page
when more than one page is displayed.
5. - Move up for selection. Or skip to the previous page
when more than one page is displayed.
6. 16-pin Connector - To connect to the vehicle's DLC (Data
Link Connector).
-4-
ArtiLink300CodeReaderUserManual
Operation Introduction
1. Preparation & Connection
1. Turn the ignition off.
2. Locate the vehicle’s DLC socket.
3. Plug the diagnostic cable into the vehicle’s DLC socket.
-5-
4. Turn the ignition on. The engine can be off or running.
5. ArtiLink 300 will start initializing and enter the main menu.
*Note: Don’t connect or disconnect any test equipment with
ignition on or engine running.
2. Diagnose
Select [Diagnose] in Main Menu and press [OK]. The tool will
automatically start a check of the vehicle’s computer.
2.1 Read Codes
This option identies which section of the emission control
system has malfunctioned.
Select [Read Codes] and press [OK].
The DTC with its denition will be displayed on screen.
-6-
*Note:NeverreplaceapartbasedonlyontheDTCdenition.
Always refer to the vehicle’s service manual for detailed
testing instructions.
2.2. Erase Codes
This option erases the codes from the vehicle after retrieving
codes from the vehicle, and certain repairs have been carried
out.
Select [Erase Codes] and press [OK].
Press [OK] to conrm erasing.
-7-
The result will be displayed on screen.
*Note: Be sure the vehicle’s ignition key is in the ON position
with the engine off.
2.3 I/M Readiness
This option checks whether or not the various emissions-
related systems on the vehicle are operating properly, and
are ready for Inspection and Maintenance testing.
It is also can be used to confirm that the repair has been
performed correctly, and/or to check for Monitor Run Status,
after the repair of a fault has been performed.
Select [I/M Readiness] and press [OK].
Select an option, and press [OK].
Indice
Altri manuali Topdon Lettore di codici a barre
Manuali Lettore di codici a barre popolari di altre marche
POSMicro
POSMicro Datalogic PowerScan D7100 Manuale utente
Marson
Marson MT780 Guida rapida alla configurazione
NCR
NCR RealPOS Manuale utente
Motorola
Motorola SE3300 Guida rapida alla configurazione
Element
Element P130BT Manuale utente
Motorola
Motorola Symbol LS3008 Manuale di installazione e funzionamento
