Topens HLR01 Manuale utente

Indice

Altri manuali Topens Apricancello

Manuali Apricancello popolari di altre marche

Elite

Elite CSW200UL Manuale utente

CAME

CAME FROG-PM4 Manuale utente

SOMFY

SOMFY FX230 Manuale utente

Aprimatic

Aprimatic ONDA 500 Manuale utente

Turnstiles

Turnstiles FSW 900 Manuale utente

Erreka

Erreka BUL BL33 Istruzioni operative

Erreka

Erreka VULCAN S Manuale utente

Beninca

Beninca R1-2 WBV Manuale utente

Erreka

Erreka VULCAN D Manuale utente

Motorline professional

Motorline professional FORT Manuale di istruzioni

Beninca

Beninca BOB5024 Manuale utente

AGA

AGA GATEMASTER 900 HD Manuale utente

Chamberlain

Chamberlain MotorLift HC280ML Manuale utente

SOMFY

SOMFY Dexxo RTS Pro Manuale utente

Cardin

Cardin BL Series Manuale utente

Westfalia

Westfalia 85 27 06 Manuale utente

CAME

CAME F500 Manuale utente

Extel

Extel VERA Manuale utente

HomeLink Compatible Universal

Gate/Door Opener Remote Control Kit

Item No.: HLR01

C030403

VER 21a

Terminals of PCB inside the Receiver

Button A is used to control the PORT1 (NO1, COM1, NC1)

Button B is used to control the PORT2 (NO2, COM2, NC2)

Wire Connection

1. Connect the KIT (HLR01) to the Gate/Door opener with power on the

board, when power from the board connected directly to HLR01.

2. Connect the KIT (HLR01) to the Gate/Door opener without power on the

board, when using external power supply for HLR01.

In this situation, you need an external 12-24VDC power source to make

the kit to work with the gate&door opener.

How to program the HomeLink system to the HLR01

Note: Please ensure the gate/door opener is powered off when you

programming the HomeLink system to the remote control.

Before you begin- You should erase any previously learned codes before

programming the first button.

You can program your HomeLink system to the remote control step by step:

1. Enter your car, insert your key into the ignition and turn the key to the

"ACC" position.

2. Select the HomeLink button you want to program (on mirror). Press and

hold the HomeLink button until the red light begins to flash slowly

(approximately 20 seconds).

3. While continuing to hold the HomeLink button, place the remote control,

which included in the package, 2 to 5 inches away from HomeLink (mirror)

and press and hold the button on the remote control. Hold both buttons until

the red light begins to flash rapidly.

4. Release both buttons. HomeLink should now be programmed to operate

the gate/door opener.

How to Program a New Remote Control to the Receiver

Press and hold the "learn"button of the receiver until the LED is

OFF,release the learn button and then press A or B button of the remote

control once, the LED will flash and then be ON. Now the remote has been

learned successfully.

Please be noted that max. 6 pcs remotes can be programmed.

How to Erase the Remote Control

Press and hold the learn button on until the LED from ON to OFF and then

turn ON again. DON’T RELEASE the learn button and then press A or B

button of the remote control once. LED will flash and be ON. Release the

learn button. Now all the remote controls have been erased.

TOPENS Website

www.topens.com

Any question, please do not hesitate to contact us:

E-mail: support@topens.com

Kindly include your Product Model, Purchasing Date & Site, Order #,

and your contact information. All your concerns will be replied within

24 hours.

Tel: +1 (888) 750 9899 (Toll Free USA & Canada)