Topfloor EX43-OCS Manuale utente
EX43-OCS
www.crescentindustrial.co.uk
Operator’s
manual -
English
Original user instruc�ons in accordance with appendix 1, art.1.7.4. of the Machinery Direc�ve 2006/42/EC.
All rights reserved. No part of this publicaon can be reproduced, placed in an automated database, photocopied, copied or released into the
public domain, in any shape or form or in any other manner, be it electronic or mechanical, without prior wrien consent from TOPFLOOR This
also applies to any accompanying drawings and diagrams. TOPFLOOR retains the right to change components at any given me, without
nofying clients directly or in advance. The contents of this manual can likewise be modified without prior warning. Please contact your
supplier's engineering department for configuraon, maintenance or repair-related informaon not addressed in this user manual. Although this
user manual has been compiled with great care TOPFLOORcannot accept responsibility for potenal errors in this user manual or the
accompanying consequences. A.C. Schermers, July 2017
www.crescentindustrial.co.uk
EX43-OCS
Table of contents.
Address......................................................................................................................................................................... 4
Preface. ........................................................................................................................................................................ 4
1. Introduc�on .............................................................................................................................................................. 5
2. General descrip�on.................................................................................................................................................. 6
3. Machine overview. ................................................................................................................................................... 7
4. Intended use. ........................................................................................................................................................... 8
5. Technical data......................................................................................................................................................... 9
5.1 Sizes and weights ................................................................................................................................................... 9
5.2 Wear parts.............................................................................................................................................................. 9
5.3 Vibra�ons of the
hand-arm system .............................................................................................................................................. 9
5.4 Noise emissions...................................................................................................................................................... 10
6. Safety........................................................................................................................................................................ 11
6.1 General................................................................................................................................................................... 11
6.2 Specific. .................................................................................................................................................................. 12
7. Storage ..................................................................................................................................................................... 13
8. Transport .................................................................................................................................................................. 14
9. Use. .......................................................................................................................................................................... 14
9.1 Checks before you start.......................................................................................................................................... 14
9.2 Accessoiries ............................................................................................................................................................ 15
9.3 Let's go! .................................................................................................................................................................. 16
10. Maintenance. ......................................................................................................................................................... 17
10.1 Lubricants........................................................................................................................................................... 17
10.2 Maintenance scedule ........................................................................................................................................... 17
10.3 Pad replacement .................................................................................................................................................. 18
11. Malfunc�ons. ......................................................................................................................................................... 19
12. Guarantee terms & condi�ons................................................................................................................................ 19
13. Repair...................................................................................................................................................................... 20
14. End of life-span....................................................................................................................................................... 20
15. Parts ....................................................................................................................................................................... 20
16. EC conformity declara�on ...................................................................................................................................... 21
www.crescentindustrial.co.uk
EX43-OCS
ADDRESSES
Design, Production, Sales and Service:
Crescent Industrial Ltd
BerringtonHouse
Berrington Road
Leamington Spa
CV31 1NB
Tel: 0845 33 77 695
www.crescentindustrial.co.uk
FOREWORD
This manual is intended for everyone involvedin putting this machine into use, and its operation,
maintenance and servicing. These people must:
• Possess the necessary level of knowledge and qualifications to do their work.
• Have read and understood this user manual.
• Follow all given safety instructions.
• If necessary, have access to sufficient right-sized and good-quality tools.
This user manual,the type plate and stickers placed on the machinecontain important safety
information and as suchforman integral part of the delivery. Store this manual in a safe place
and pass it on if the machine is sold.
www.crescentindustrial.co.uk
EX43-OCS
1. INTRODUCTION
Congratulations on the purchase of this floor preparation machine that can be used to clean,
strip, polish, sand and remove paint, coatings, glue residues, etc.
You now possess a machine produced using the very latest technology, which you will be able
to use for many years without malfunction, as long as you use it in the correct manner.
The purpose of this manual is to familiarize you with the operation, to instruct you on safe
working practices, and to provide periodic maintenance guidelines.
Make sure you are familiar with the contents of this user manual before you start working with
the machine, so you can fully and safely use all of the machine's features.
This user manual, the type plate and the safety stickers placed on the machine feature important
safety-related information and are thus an integral part of the delivery.
If damaged or lost, they must be re-applied or supplied once again.
These items can also be re-supplied by your dealer.
The machine is delivered completely assembled and is ready to scrub/sand/polish. Make sure
that you are experienced in doing these types of work before you start.
Upon delivery you will get complete oral instructions on how to operate the machine, the safety
instructions and the necessary maintenance. If this is not possible, then the buyer is responsible
for the correct instruction.
The machine offers many possibilities to process a floor. TOPFLOOR offers various trainings to
get the most out of the machine. Visit www.crescentindustrial.co.uk for full product guides and
useful videos on how to operate the machine.
www.crescentindustrial.co.uk
EX43-OCS
2. GENERALDESCRIPTION
The EX43-OCS is designed to easily clean almost all types of floors. This machine has the bene-
fits of both eccentric cleaning and orbital cleaning.
In combination with the interchangeable pads, the machine is very versatile: from carpet clean-
ing to (chemical-free!) stripping or polishing of parquet.
The plastic bumpers on all sides enable you to accurately work on sides.
What makes the EX43-OCS unique is the so-called Topfloor Oscillating Floor Cleaning method:
the high velocity of 1400 small movements per minute. This combined with the rotating
motion of an orbital cleaner results in an unmatched operation of the pad. The machine gives
you the feeling that it 'floats' across the floor, which makes it easy and relaxed to handle the
machine during operation.
The base of the machine is a robust stainless steel frame with a set of wheels to which the pad
holder with vibrating rubbers is attached. A robust eccentric electro motor is attached to the
frame and drives the pad holder.
Extra weights have been applied on the machine to keep sufficient pressure on the pad.
To operate, a stainless steel handle with T-handlebar is installed on the frame and can be
adjusted in 7 different positions, so the handle can be set to the correct height for each height
requirement.
Two sturdy wheels have been installed as such that the lever action of the handle can tilt the
machine backwards for easy movement.
www.crescentindustrial.co.uk
EX43-OCS
3. MACHINEOVERVIEW
1. T- Handle
2. Switch pump cleaning agent
3. Hour counter
4. Wheels
5. Extrac�on connec�on
6. ON/OFF switch
7. Housing
8. Handle
9. Connec�on cable
10. Tank cleaning agent
11. Handle height adjustment
12. Motor
13. Frame
14. Nozzle cleaning agent
15. Handle
16. Nut weights
17. Extra weights (op�on)
18. Bumper set
19. Pad holder
20. Pad
www.crescentindustrial.co.uk
EX43-OCS
4. INTENDED USE
The EX43-OCS floor preparation machine is developed for:
• Cleaning
• Stripping
• Polishing
• Sanding
• Levelling
• Grinding
small and medium-size floor surfaces, with the use of the exchangeable pads and/or accessories
that are applicable for a task.
The duty cycle is 100% under normal use and in case of good workmanship.
Manufactured in accordance with IP54 for use with (scrub) water.
Use for other purposes has not been examined (yet) by TOPFLOOR. When considering other
applications, please contact TOPFLOOR IN ADVANCE to discuss whether the machine is actually
suitable.
During operation the person stands BEHIND the machine with both hands (loosely) on the
Thandlebar.
WARNING!
Any use other than that mentioned above will relieve Topfloor of
all its responsibilities!!
WARNING!
The machine does NOT comply with the ATEX directive and this
version may NOT be used in any such environment!!
www.crescentindustrial.co.uk
EX43-OCS
www.crescentindustrial.co.uk
EX43-OCS
Wear parts are components found inside the machine, which do not fall under the guarantee
due to:
1. increased contact with the product.
2. Normal wear by normal use.
The wear parts in this machine include:
• The rubber buffers
• The exchangeable pads
Avg. value: 2.6 m/s2,
Max. deviation: 0.3 m/s2.
(Values have not yet been measured, but taken from a similar machine.)
5. TECHNICAL DETAILS
5.1 Sizes and weights
Height: 1,25 m
Width: 0,47 m
Depth: 0,68 m
Weight : ca 38 kg, basis machine (geen ballast)
Ballast: standard 1 set (= 7 kg)
max 6 sets (=42kg)
Voltage: 220V-240VAC @ 50Hz
Current: max 8A (input)
Power : 1200W
Insulation: Rim earthing
Insulation class : IP54 (dust-tight /splash-proof)
Inclination: Max 2%.
5.2 Wear parts.
5.3 Vibrations of hand-arm system.
www.crescentindustrial.co.uk
EX43-OCS
When the machine is operated the measured noise level is 72 dB(A).
Experience shows that the noise emission of the machine depends heavily on the surface and
space of operation.
This can result in situations in which the noise level is significantly higher because of 'echo'
sounds.
TOPFLOOR therefore advises that you always have ear protection at your disposal.
5.4 Noise emissions.
From www.arboportaal.nl:
The danger of noise hearing impairment for employees begins at 80 dB (A). According to the Occupational
Health and Safety Act the employer must provide hearing protection above this value.
At 83 dB(A) an employee may only work four hours without hearing protection, at which there may be no
unacceptably high risk of hearing damage. In the remaining 4 hours there may no longer be any high noise
levels.
It is mandatory for an employee to use ear protection if the average daily dose is higher than 85 dB(A)
Indice
Altri manuali Topfloor Scrubber
