lDo not allow riders on the tractor at anytime. There is no safe place
for any riders.
lDo not operate unless all personnel, livestock, and pets are several feet
away to prevent injury.
lThe rotating parts of this machine have been designed and tested for
rugged use. However, they could fail upon impact with heavy, solid
objects such as steel guardrails and concrete abutment. Such impact
could cause the broken objects to be thrown outward. To reduce the
possibility of property damage , serious injury，or even death, never
allow the auger to contact such obstacles.
lStop the post hole digger and tractor immediately upon striking an
obstruction. Turn engine off，remove key, inspect and repair any
damage before resuming operation.
lStay alert for uneven terrain, rocks, and roots and other hidden
hazards. Keep away from drop-offs and hazards that could cause roll
over. Use extreme care and maintain minimum ground speed when
transporting or operating on hillsides, over rough ground and when
operating close to ditches or fences . Be careful and slow down when
turning sharp corners and changing direction on slopes. Do not start or
stop suddenly on slopes. Avoid operation on steep slopes. In
extremely uneven terrain，rear wheels weights, front tractor weight,
and/or tire ballast should be used to improve stability.
lAlways check tractor manual for proper use on stopes.
lWhen using a unit , a minimum 20% of tractor and equipment weight
must be on tractor front wheels. Without this weight , tractor could tip
over, causing personal injury or death. The weight may be attained
with a frontend loader , front wheel weight , ballast in the tires or
front tractor weights. When attaining a minimum 20% of tractor and
equipment weight on the front wheel , you must not exceed the ROPS
weight certification. Weight the tractor and equipment. Do not guess
or estimate!
TRANSPORT SAFETY
lComply with state and local laws governing highway safety and
movement of farm machinery on public roads.
lThe use of flashing amber lights is acceptable in most localities.
However , some localities prohibit their use. Local laws should be
checked for all lighting and marking requirements.
lAt all times, when driving the tractor and equipment in the road or
highway under 20mph(32kph) use flashing amber warning lights and
a slow moving vehicle (SMV) identification emblem . Do not exceed
20 mph(32kph). Reduce speed on rough roads and surfaces.
lPlan your route to avoid heavy traffic.
