Torin BIG RED T32100 Manuale utente

OWNER’S MANUAL

1500 Lbs Engine Leveler

Item: T32100

Questions, problems, missing parts? Before returning to your retailer, call our customer service department at

1-888-44-TORIN (1-888-448-6746), 8 a.m.- 5 p.m., PST, Monday-Friday.

Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure

to follow the safety rules and other basic safety precautions may result in serious personal injury.

Version 20160922

IMPORTANT

OWNER / USER RESPONSIBILITY

INTENDED USE

TECHNICAL SPECIFICATIONS

Before You Begin Register This Product.

For future reference, record the model name, model number, date of manufacture and purchase date of this

product. You can nd this information on the product.

Model Name ________________________

Model Number ________________________

Date of Manufacture _______________________

Date of Purchase ________________________

DO NOT OPERATE OR REPAIR THIS PRODUCT WITHOUT READING THIS MANUAL.

Read and follow the safety instructions. Keep Instructions readily available for operators. Make certain all

operators are properly trained and understand how to safely and correctly operate the product. By proceeding

you agree that you fully understand and comprehend the full contents of this manual. Failure to operate this

product as intended may cause injury or death. The manufacturer is not responsible for any damages or injury

caused by improper use or neglect. Allow product operation only with all parts in place and operating safely.

Use only genuine replacement parts. Service and maintain the product only with authorized or approved

replacement parts; negligence will make the product unsafe for use and will void the warranty. Carefully

inspect the product on a regular basis and perform all maintenance as required. Store these instructions

in a protected dry location. Keep all decals on the product clean and visible. Do not modify and/or use for

any application other than that for which this product was designed. If you have any questions relative to a

particular application, DO NOT use the product until you have rst contacted the distributor or manufacturer to

determine if it can or should be performed on the product.

For technical questions please call 1-888-448-6746.

This universal engine leveler makes engine handling and positioning easier. Great for use with engine hoists

or engine cranes. The swivel handle allows for easy adjusting. This equipment is specially designed to raise,

lower and transport engines, differentials, transmissions, and other heavy loads with minimal effort. Tested for

reliability and safety to meet ASME PASE standards.

Item Capacity

T32100 1500 lbs

GENERAL SAFETY RULES

IMPORTANT SAFETY CONSIDERATIONS

WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result

in serious injury.

WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot

cover all possible conditions or situations that could occur. It must be understood by the operator

that common sense and caution are factors that cannot be built into this product, but must be supplied by

the operator.

CAUTION: Do not allow persons to operate or assemble this Hydraulic Engine Crane until they have read

this manual and have developed a thorough understanding of how the Hydraulic Engine Crane works.

• For your safety, read, understand, and follow the information provided with and on this product before using.

• The owner and/or operator of this equipment shall have an understanding of safe use/operating procedures

before attempting to use.

• The owner and/or operator shall be aware that the use of this product may require special skills and

knowledge.

• Instructions and safety information shall be conveyed in the operator's native language before use of this

device is authorized.

• If any doubt exists as to the safe and proper use of this product as outlined in this factory authorized manual,

remove from service immediately.

• Inspect before each use. Do not use if broken, bent cracked, or damaged parts (including labels) are noted.

• If the product appears damaged in any way, operates abnormally or is missing parts, it should be removed

from service immediately and the manufacturer notied.

• If you suspect that the product was subjected to a shock load (a load suddenly dropped unexpectedly upon

it), immediately discontinue use until product has been clocked by a factory authorized service center (contact

distributor for list of Authorized Service Centers).

• It is recommended that qualied personnel do an annual inspection.

• Labels and owner's manuals are available from manufacturer.

• Not for use by children or people with reduced mental capacity.

• Do not use under the inuence of drugs or alcohol.

• Ensure children and other bystanders are kept at a safe distance when using jack.

1. Study, understand, and follow all instructions before operating the device.

2. Do not exceed rated capacity.

3. Use only on hard, level surfaces, with less than 3 degrees of slope.

4. Ensure load is secured to the device.

5. Use only slings or chains with a rated capacity greater than the weight of the load being lifted.

6. Do not allow load to swing or drop violently while lowering or moving.

7. Center load prior to lifting.

8. To be used ONLY with Shop Cranes or Engine Hoists.

9. Release load-locking devices (if employed) slowly and carefully.

10. No alterations shall be made to this product.

11. Never use on a lawn mower or lawn tractor.

12. Do not rock the vehicle while working on or around equipment.

13. Equipment is design for lifting only, do not move or dolly crane when in use.

14. The following are not recommended for supporting on this equipment: Foundations, Homes, Mobile

Homes, Trailers, RV’s, Campers, nor Fifth Wheels, etc...

15. Do not use this crane for any use other than the manufacturer specied usage.

16. Failure to heed these markings may result in personal injury and/or property damage.

WARNING:

OPERATING INSTRUCTIONS

OPERATION

BEFORE USE

1. Before using this product, read the owner's manual completely and familiarize yourself thoroughly with the

product and the hazards associated with its improper use.

2. Inspect before each use. Do not use if bent, broken or cracked components are noted.

1. Block the vehicle’s wheels for lifting stability. Set the Parking Brake in the vehicle.

2. Position the jack near desired lift point.

3. Align the handle with the lowering valve on the engine crane making sure to align with lowering valve, turn

the lowering valve to the CLOSED position until tight.

4. Ensure application is compatible with product.

5. Read, understand and follow engine removal and installation instructions provided by vehicle manufacturer

service or shop manual.

6. This leveler is only to be used with an appropriately rated engine crane.

7. Connect the mounting chain on the leveler to the engine crane boom hook.

8. Chains used in conjunction with this product shall have a rated capacity greater than the rated capacity of

the product.

9. Secure the (5) Chain with L-bracket assembly to appropriate lifting points.

10. Refer to vehicle manufacturer service or shop manual for the location of appropriate lifting points.

11. Ensure load is centered.

12. Secure the load to prevent inadvertent shifting and movement.

13. Adjust the angle of leveler by turning the crank handle of the leveler. (Fulcrum may pivot when lifting; use

caution when lifting.)

14. After removing engine, immediately transfer the engine to appropriate engine support device (engine

stand).

15. Check to ensure stand is secure before working on or around.

WARNING: DO NOT LOAD BEYOND RATED CAPACITY.

! Maximum rated load is 1500 pounds.

! Before lifting load, be sure all bolts on lifting beam and all

fasteners connected to load are engaged and tightened.

! Keep body and body parts from under lifted load at all times.

Failure to follow operating and safety instructions provided

may result in personal injury or deth. Read instructions in

operator’s manual

WARNING

WARNING!

DO NOT CLIMB, HANG OR SWING. MISUSE

OF ENGINE CRANE COULD RESULT IN A FALL

THAT MAY RESULT I SEVERE INJURY!

DANGER

KEEP OFF

CLIMBING

OPERATOR SHOULD ALWAYS

OPERATOR SHOULD

ADDITIONAL OPERATING INSTRUCTIONS

To remove an auto or truck engine with transmission intact, rst uncouple the transmission and remove motor

mount bolts. With the Engine Leveler hooked to an overhead hoist above the engine, attach the L-shape

connections at the end of the four (4) chains (choose one of two holes provided) to the engine head bolts -

two at front, both sides, and two at rear, both sides. Using the engine hoist, take up slack in chain carefully. Lift

a few inches and check load balance. To reach the desired angle for load balance, adjust the position of the

movable fulcrum in the beam by turning the handle or the 1" hex adjusting nut at end of the worm shaft with a

ratchet wrench. Then carefully lift out the engine and transmission. By turning the handle one direction or the

other, the suspended engine and transmission can then be tipped only enough to remove. Reverse the above

steps to reinstall repaired engine transmission. For this and other types of loads, make sure all connections

are tight and secure before operating the hoist.

1. Be familiar with Engine Leveler operating controls, procedures and warnings.

2. Make sure all connections to load are tight and secure.

3. Maintain rm footing when operating Engine Leveler.

4. Make sure that load is free to move and will clear all obstructions.

3. Take up slack carefully, check load balance, lift a few inches and check load holding action before

continuing.

4. Avoid swinging of load.

5. Make sure that all persons stay clear of the suspended load.

6. Warn personnel of an approaching load.

7. Protect load chain from weld spatter or other damaging contaminants.

8. Promptly report to your supervisor or repair any malfunction, unusual performance, or damage of the

Engine Leveler.

9. Inspect Engine Leveler regularly, replace damaged or worn parts, and keep appropriate records of

maintenance.

1. Never lift more than rated load.

2. Never use damaged Engine Leveler or Engine Leveler that is not working correctly.

3. Never use the Engine Leveler with twisted, kinked, damaged or worn chain.

4. Never lift a load if any binding prevents equal loading on all supporting chains

5. Never allow the operators attention to be diverted from operating the Engine Leveler.

6. Never use Engine Leveler to lift, support or transport people.

7. NEVER LIFT LOADS OVER PEOPLEI

8. Never leave a suspended load unattended.

9. Never allow sharp contact between sling and obstructions.

10. Never allow the chain or link to be used a as ground for welding.

11. Never allow the chain or link to be touched by a live welding electrode.

10. Never attempt to lengthen the load chain or repair damaged chain.

11. Never wire, clamp or otherwise disable the lift control to function by any means other than by using the

operator's hand.

WARNING: USE EXTREME CAUTION WHEN TURNING HANDLE. THE HANDLE MAY TURN RAPIDLY.

FAILURE TO HEED THESE WARNINGS COULD CAUSE SERIOUS INJURY OR DEATH.

MAINTENANCE INSTRUCTIONS

If you use and maintain your equipment properly, it will give you many years of service. Follow the

maintenance instructions carefully to keep your equipment in good working condition. Never perform any

maintenance on the equipment while it is under a load.

Inspection

You should inspect the product for damage, wear, broken or missing parts (e.g.: pins) and that all components

function before each use. Follow lubrication and storage instructions for optimum product performance.

Binding

If the product binds while under a load, use equipment with equal or a larger load capacity to lower the load

safely to the ground. After un-binding; clean, lubricate and test that equipment is working properly. Rusty

components, dirt, or worn parts can be causes of binding Clean and lubricate the equipment as indicated in

the lubrication section. Test the equipment by lifting without a load. If the binding continues, contact Customer

Service.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean

the equipment. Remove any existing rust, with a penetrating lubricant.

Lubrication

This equipment will not operate safely without proper lubrication. Using the equipment without proper

lubrication will result in poor performance and damage to the equipment. Some parts in this equipment are not

self-lubricating inspect the equipment before use and lubricate when necessary. After cleaning, lubricate the

equipment using light penetrating oil or lubricating spray.

-Use a good lubricant on all moving parts.

-For light duty use, lubrication is needed once a month.

-For heavy and constant use, lubrication is recommended every week.

Rust Prevention:

Check rams and pump plungers on the power unit assemblies daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust

are visible clean as needed.

Storing the Product

1. Store in a dry location, recommended indoors.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the

equipment stays in good working condition.

ASSEMBLY DIAGRAM

No. Part Description Qty

1 Mounting Bracket with Mounting Hardware 1

2 TRF2750-1 Plastic handle 1

3GB818-M6x14 Pan head machine screw M6x14mm 1

4 TRF2750-2 Screw-pin shackles Ø9mm 2

5 TRF2750-3 Chain With L-Bracket Assembly 4

Safe Operating Temperature is between 40°F – 105°F (4°C - 41°C)

WARRANTY NOTICE

WARRANTY INFORMATION

This product is covered under a 1-year limited warranty when used as recommended. Only those items listed

with a Part # are available for purchase. For assistance with the operation or the availability of replacement

parts, contact our Parts and Warranty Department at 1-888-44-TORIN (1-888-448-6746). Please have

available a copy of your receipt, the model number of the product, serial number, and specic details

regarding your question.

Not all equipment components are available for replacement; illustrations provided are a convenient reference

of location and position in the assembly sequence.

The manufacturer reserves the rights to make design changes and or improvements to product lines

and manuals without notice.

We want to know If you have any concerns with our products. If so, please call toll-free for Immediate

assistance. For additional web customer support help inquiries visit the Customer Service section at: http://

www.torin-usa.com.

TORIN ONE YEAR LIMITED WARRANTY

Torin Inc.® has been producing quality automotive repair and maintenance products since 1968. All products

sold are felt to be of the highest quality and are covered by the following warranty:

With proof of purchase for a period of one year from the date of that purchase, the manufacturer will repair or

replace, at its discretion, without charge, any of its products or parts thereof which fail due to a defect in

material or workmanship. This warranty does not cover damage or defects caused by improper use, careless

use or abuse of the equipment. This warranty does not cover parts normally considered to wear out or be

consumed in the normal operation of the equipment. Except where such limitations and exclusions are

specically prohibited by applicable law, (1) the CONSUMERS SOLE AND EXCLUSIVE REMEDY SHALL BE

THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS DESCRIBED

ABOVE, and (2) THE MANUFACTURER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR

INCIDENTAL DAMAGE OR LOSS WHATSOEVER, and (3) THE DURATION OF ANY AND ALL

EXPRESSED AND IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO A PERIOD OF ONE

YEAR FROM DATE OF PURCHASE. Product alteration in any manner by anyone other than us, with the sole

exception of alterations made pursuant to product instructions and in a workman like manner. You

acknowledge and agree that any use of the product for any purpose other than the specied use(s) stated in

the product instructions is at Your own risk.

Always check for damaged or worn out parts before using any product. Broken parts will affect the equipment

operation. Replace or repair damaged or worn parts immediately. Do not modify the product in any way.

Unauthorized modication may impair the function and/or safety and could affect the life of the equipment.

There are specic applications for which products are designed and tested during production. Manufacturer

provided warranted items are not authorized to be repaired by anyone other than the manufacturer or

manufacture approved repair person. Distributor does not have authorization to amend these statements. You

acknowledge and agree that any modication of the product for any purpose other than manufacturer

completed repairs is at your own risk. Before using this product, read the owner's manual completely and

familiarize yourself thoroughly with the product and the hazards associated with its improper use.

IMPORTANT: BEFORE FIRST USE on any Lift verify that a daily inspection has been completed and that all

components are in the proper working order.

This limited warranty gives you specic legal rights, and you also may have other rights, which vary from

state to state. Some states do not allow limitations or exclusions on implied warranties or incidental or

consequential damages, so the above limitations may not apply to You. This limited warranty is governed by

the laws of the State of California, without regard to rules pertaining to conicts of law. The state courts

located in San Bernardino County, California shall have exclusive jurisdiction for any disputes relating to this

warranty.

Manufacturer reserves the rights to make design changes and or improvements to this product lines and

manual without notice. We at Torin have taken every effort to ensure complete and accurate instructions have

been included in this manual. However, possible product updates, revisions and or changes may have

occurred since this printing. Torin Inc. reserves the right to change specications without incurring any

obligation for equipment previously or subsequently sold. Not responsible for typographical errors.

Alternately Customer Service can be reached through www.torin-usa.com or via email at

[email protected].

Not all equipment components are available for replacement, but are illustrated as a convenient reference of

location and position in the assembly sequence. Contact Customer Service for equivalent component. When

you contact us, please have your Product’s Model number, Serial Number and Description ready so that we

may help you efciently. This information can be found on a sticker on the product.

For any warranty support or if your Torin® equipment is not functioning properly contact

Torin® Customer Service directly by telephone at 1-888-44-TORIN (1-888-448-6746)

8:00am – 5:00pm Pacic Time, Monday – Friday

www.torin-usa.com Made in China

MANUEL DU PROPRIÉTAIRE

Soulève-moteur, 1500 lb

Article No. T32100

Version 20161019

Questions, problèmes, pièces manquantes? Avant de retourner voir votre fournisseur, appelez notre service à

la clientèle au 1-888-44-TORIN (1-888-448-6746) entre 8 heures et 17 heures, HNP, du lundi au vendredi.

Lisez attentivement et comprenez toutes les DIRECTIVES DE MONTAGE ET DE FONCTIONNEMENT avant

l’utilisation. Vous pouvez subir des blessures graves si vous ne vous conformez pas à ces règles et autres

précautions de sécurité.

AVERTISSEMENT!

Indice

Lingue:

Altri manuali Torin Sistema di sollevamento

Torin

Torin QJY240C Manuale utente

Manuali Sistema di sollevamento popolari di altre marche

morse

morse 82H-124 Manuale utente

Braun

Braun NL955 Series Manuale utente

haacon

haacon 1889.10 Manuale utente

Protekt

Protekt AT 252 Manuale utente

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuale utente

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuale utente

Genie

Genie Z-60/34 Manuale utente

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuale utente

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuale utente

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuale di programmazione

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuale di programmazione

BERG

BERG BeNomic EasyLeaf Manuale utente

Powermate

Powermate LiftGate LG-3 Manuale utente

Snorkel

Snorkel TM12 Series Manuale utente

Terberg

Terberg OMNIDEKA Manuale utente

Harmar Mobility

Harmar Mobility AL625 Istruzioni operative

Rotary

Rotary SPO16 Manuale utente