Toshiba TDP-F10U Manuale utente

Before UsingPreparationsOperationsMaintenanceOthers

TDP-F10

LED PROJECTOR

OWNER’S MANUAL

In the spaces provided below, record the Model and Serial No. located at the bottom of your

projector.

Model No. Serial No.

Retain this information for future reference.

Before using

SAFETY PRECAUTIONS

MODEL NAME: TDP-F10

FCC NOTICE:This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated "dangerous voltage"

within the product's enclosure that may be of sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance (servicing) instructions

in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH

VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE

CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

WARNING: Handling the cord on this product or cords associated with accessories sold

with this product, will expose you to lead, a chemical known to the State of

California to cause birth defects or other reproductive harm. Wash hands

after handling.

TRADE NAME: LED PROJECTOR MODEL NAME: TDP-F10

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

USA ONLY

Before Using

- Consult the dealer or an experienced radio/TV technician for help.

RESPONSIBLE PARTY: TOSHIBA AMERICA INFORMATION SYSTEMS, INC.

9740 Irvine Blvd., Irvine, CA 92618-1697 U.S.A

Phone: (949) 583-3000

CAUTION: Changes or modifications made to this equipment, not expressly approved by

Toshiba, or parties authorized by Toshiba, could void the user’s authority to

operate the equipment.

Notice: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil

numérique de la classe B est conforme à la norme NMB-003 du Canada.

USA ONLY

CANADA ONLY

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS

GIVEN IN THIS OWNER'S MANUAL AND THOSE MARKED ON THE UNIT.

RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

This unit is fully transistorized and does not contain any parts that can be repaired by the

user.

WARNING:DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO

DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL ONLY.

1. Read Owner's Manual

After unpacking this product, read the

owner's manual carefully, and follow all

the operating and other instructions.

3. Source of Light

Do not look into the lens while the

projector is on. The strong light from the

lens may cause damage to your eyesight.

2. Power Sources

This product should be operated only

from the type of power source which

does not exceed the voltage range

specified on the rating label and the

power cord. If you are not sure of the

type of power supply to your home,

consult your product dealer or local

power company.

4. Ventilation

Openings in the cabinet are provided for

ventilation and to ensure reliable operation

of the product and to protect it from

overheating. These openings must not be

blocked or covered. Never block an

opening by placing the product on a bed,

sofa, rug or other similar surface. Do not

place it in a built-in installation such as a

bookcase or rack, unless proper ventilation

is provided.

Before Using

5. Heat

The product should be situated away

from heat sources such as radiators,

heat registers, stoves, or other

products (including amplifiers) that

produce heat.

8. Be sure that you firmly insert

the plug into the wall outlet.

Incorrect or faulty connections may result

in fire or electric shock. Avoid using an

unsound or loose outlet.

9. Power Cord Protection

Power cords should be routed so that they

are not likely to be walked on or pinched

by items placed upon or against them,

paying particular attention to cords at

plugs, convenience receptacles, and the

point where they exit from the product.

10.Overloading

Do not overload wall outlets. To reduce

the risk of electric shock, do not use the

polarized plug with an extension cord,

receptacle, or other outlet unless the

blades can be inserted completely with

three wire grounding type to prevent

blade exposure. Failure to follow these

instructions may result in fire or electric

shock.

6. Water and Moisture

Do not use this product near water.

- for example, near a bath tub, wash

bowl, kitchen sink, or laundry tub; in a

wet basement; or near a swimming

pool and other similar environments.

7. Cleaning

Unplug this product from the wall outlet

before cleaning. Do not use liquid

cleaners or aerosol cleaners.

Always use a soft cloth for cleaning.

IMPORTANT SAFETY INSTRUCTIONS (Continued)

11.Lightning storms

For added protection for this product

during a storm, or when it is left

unattended and unused for long

periods of time, unplug it from the wall

outlet. This will prevent damage to the

product due to lightning and power-

line surges.

However, while it is thundering or

lightning, do not touch the apparatus

and any connected cable and/or

equipment.

This will prevent you from receiving

the electric shock by an electric surge.

14.Do not place the product

vertically

Do not use the product in the upright

position or any other vertical positions to

project the pictures. It may fall which

could result in serious injury and/or

damage to the product.

15.Stack Inhibited

Do not stack other equipment on this

product and do not place this product on

other equipment. The top and bottom

surface of this product increase in

temperature during normal use and may

damage the other unit.

16.Attachments

Do not use attachments not recommended

by the product manufacturer.

Use of an incompatible attachments could

cause hazards or damage to the product.

12.Object and Liquid Entry

Never push objects of any kind into

this product through openings as they

may touch dangerous voltage points

or short-out parts that could result in a

fire or electric shock. Never spill liquid

of any kind on the product.

13.Do not place or keep the

projector within the reach

of the children.

It may fall or tip over, possibly causing

serious injury.

Before Using

17.Accessories

Do not place this product on an

unstable cart, stand, tripod, bracket, or

table. The product may fall, causing

serious injury to a child or adult, and

serious damage to the product. A

product and cart combination should

be moved with care. Quick stops,

excessive force, and uneven surfaces

may cause the product and cart

combination to overturn.

e) The product has been dropped or dam-

aged in any way (If the cabinet should

break, please handle with care to avoid

injury) .

f) The product exhibits a distinct change in

performance, which indicates a need for

service.

19.If glass components including

lens should break, contact

your dealer for repair service.

This product incorporates glass

components including a lens. If these

should break, please handle with care to

avoid injury and contact your dealer for

repair service. Avoid any broken pieces of

glass since they may cause injury.

20.Servicing

Do not attempt to service this product

yourself as opening or removing covers

may expose you to dangerous voltage or

other hazards. Refer all servicing to

qualified service personnel.

18.Damage Requiring Service

Unplug this product from the wall

outlet and take the product to qualified

service personnel if you encounter any

of the following conditions:

a) The power supply cord or plug is dam-

aged.

b) Liquid has been spilled, or objects

have fallen into the product.

c) The product has been exposed to rain

or water.

d) The product does not operate nor-

mally when following the operating

instructions. Adjust only those controls

that are covered by the operating

instructions since an improper adjust-

ment of other controls may result in

damage and will often require exten-

sive work by a qualified technician to

restore the product to its normal oper-

ation.

S3125A

IMPORTANT SAFETY INSTRUCTIONS (Continued)

21.Replacement Parts

When replacement parts are required,

be sure the service technician has

used replacement parts specified by

the manufacturer or have the same

characteristics as the original part.

Unauthorized substitutions may result

in fire, electric shock, or other hazards.

22.Safety Check

Upon completion of any service or

repairs to this product, ask the service

technician to perform safety checks to

verify that the product is in proper

operating condition.

23.Do not leave thermal-paper

documents or easily deformed

items on top of the unit or

near the air exhaust for long

periods of time.

The heat from the unit could erase the

information on the thermal paper, or

cause deformation or warping.

24.Do not use the product in a

closed installation location.

Do not place the product in a box or in

any other closed installation location.

Otherwise it may overheat, which could

result in a risk of fire.

Before Using

IMPORTANT PRECAUTIONS

Moisture Condensation

Never operate this unit immediately after moving it from a cold location to a warm location.

When the unit is exposed to such a change in temperature, moisture may condense on the

lens and the crucial internal parts. Do not use the unit for at least 2 hours when there is an

extreme or sudden change in temperature to prevent the unit from possible damage.

Place and Manner of Installation

• Do not place in hot locations, such as near heating equipment. Doing so could cause a

malfunction, and shorten the life of the projector.

• Avoid locations with oil or cigarette smoke. These environments will dirty the optical

parts, shortening their lives, and darkening the screen.

• Using this instrument near a TV or radio may cause interference to the images or audio

sound. If this happens, move it away from the TV or radio.

• Moving the projector from a low-temperature room to a high-temperature room may

cause condensation on the lens or internal parts in the instrument. If you continue to use

it in that situation, the malfunction may result. Ensure to wait until the condensation

naturally disappears.

• In a high altitude location such as over 1500m (5000ft) from sea level, the air is thin and

cooling efficiency is reduced so use the projector with [Fan mode] set to [High].

Otherwise, surface of the projector becomes hot and the lifetime may be reduced.

• Only plug the power cord into outlets rated for use within the power cord's specified

voltage range. Do not overload extension cords or power strips as this can result in fire

or electric shock.

• Route the power cable or the connecting cable away from where people could trip over

it. The projector may fall which could result in serious injury and/or damage to the

product.

• Be sure the power cord is easily reached for unplugging in case of emergency. Do not

place any obstacles near a wall outlet in which the cord is plugged.

• Do not use the projector while holding it in your hands or lap.

• Do not use the projector near a power source and the like, or in locations like a ship or

vehicle that are subject to vibration or shock. Doing so may lead to a malfunction or

shorten service life.

Avoid Volatile Liquid

Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or

plastic products touching the unit for a long time. They will leave marks on the finish. Do not

use a chemically saturated cloth on the unit.

p.36

EXEMPTION CLAUSES

• Toshiba Corporation bears no responsibility in the case of damages arising from natural

disaster such as earthquakes, lightning, etc., fire not liable to Toshiba Corporation, acts

by third parties, other accidents, or use under abnormal conditions including erroneous

or improper operation and other problems.

• Toshiba Corporation bears no responsibility for incidental damages (lost profit, work

interruption, corruption or loss of the memory contents, etc.) arising from the use of or

the inability to use this unit.

• Toshiba Corporation accepts no liability whatsoever for any damages arising from not

having followed the descriptions in this Owner's Manual.

• Toshiba Corporation accepts no liability whatsoever for any damages arising from

malfunctions arising from combination with equipment or software that is not related to

Toshiba Corporation.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Toshiba Proiettore

Toshiba

Toshiba TDP-MT700 Manuale utente

Toshiba

Toshiba TDP-SC35 Manuale utente

Toshiba

Toshiba TLP-X4500 Manuale utente

Toshiba

Toshiba TLP-510U Manuale utente

Toshiba

Toshiba XE30U - TLP XGA LCD Projector Manuale utente

Toshiba

Toshiba TDP-S3 Manuale utente

Toshiba

Toshiba TLP-T501U Series Manuale utente

Toshiba

Toshiba TLP-X4100U Manuale utente

Toshiba

Toshiba TDP-P3-US Manuale utente

Toshiba

Toshiba TDP-S9 Istruzioni per l'installazione

Toshiba

Toshiba TDP-S9 Manuale utente

Toshiba

Toshiba TLP781U Manuale utente

Toshiba

Toshiba TDP-T90 Manuale utente

Toshiba

Toshiba TLP-ET1E Manuale utente

Toshiba

Toshiba TDP-T420U - XGA DLP Projector Manuale utente

Toshiba

Toshiba TDP-T45U - XGA DLP Projector Manuale utente

Toshiba

Toshiba TDP-P7U Manuale utente

Toshiba

Toshiba TLP-XC3000 Manuale utente

Toshiba

Toshiba TDP-TW420U - XGA DLP Projector Manuale utente

Toshiba

Toshiba TLP-X200U Manuale utente

Toshiba

Toshiba TLP510E Guida all'installazione

Toshiba

Toshiba TDP-TW95 Manuale utente

Toshiba

Toshiba TDP-MT200 Manuale utente

Toshiba

Toshiba TLP-X2000B Manuale utente

Manuali Proiettore popolari di altre marche

iEmmet

iEmmet MP-312 Manuale utente

Epson

Epson VS400 Manuale utente

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuale utente

Sony

Sony VPL-HW65ES Manuale di servizio

Philips

Philips LC1341 Guida di riferimento

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuale utente

NEC

NEC NP600S EDU Manuale utente

BenQ

BenQ SH753P Manuale utente

Eiki

Eiki EK-623U series Manuale utente

Epson

Epson PowerLite Pro Cinema 6020UB Manuale utente

Epson

Epson PowerLite Home Cinema 705HD Manuale utente

Christie

Christie LHD700 Manuale utente

Navitar

Navitar FX Manuale utente

InFocus

InFocus LitePro 560 Manuale utente

Sony

Sony SRX-R815P Manuale utente

Vivitar

Vivitar DP1500 X Manuale utente

Acer

Acer C20 Series Manuale utente

Asus

Asus ZenBeam Latte Manuale utente