Toshiba TLP-B2E Manuale utente

The most trusted, dependable name

in projector lamp sales.

http://www.myprojectorlamps.com

http://www.myprojectorlamps.ca

http://www.myprojectorlamps.eu

The following projector manual has not been modified or altered in any way.

CONTENTS

Before use

OWNER’S MANUAL

3LCD DATA PROJECTOR

TLP-B2E

CONTENTS

Before use

SAFETY PRECAUTIONS

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert the user to the

presence of uninsulated “dangerous

voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and

maintenance (servicing) instructions

in the literature accompanying the

appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH

VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN

THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

CONTENTS

Before use

IMPORTANT PRECAUTIONS

In the spaces provided below, record the Model and Serial No.

located at the rear of your LCD projector.

Model No. Serial No.

Retain this information for future reference.

Save Original Packing Materials

The original shipping carton and packing materials will come in

handy if you ever have to ship your LCD projector. For maximum

protection, repack the set as it was originally packed at the factory.

Avoid Volatile Liquid

Do not use volatile liquids, such as an insect spray, near the unit.

Do not leave rubber or plastic products touching the unit for a long

time.They will mar the finish.

Moisture Condensation

Never operate this unit immediately after moving it from a cold

location to a warm location.When the unit is exposed to such a

change in temperature, moisture may condense on the crucial

internal parts.To prevent the unit from possible damage, do not use

the unit for at least 2 hours when there is an extreme or sudden

change in temperature.

CONTENTS

Before use

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND

OBSERVE ALL WARNINGS

AND INSTRUCTIONS GIVEN

IN THIS OWNER’S MANUAL

AND THOSE MARKED ON

THE UNIT. RETAIN THIS

BOOKLET FOR FUTURE

REFERENCE.

This set has been designed and

manufactured to assure personal safety.

Improper use can result in electric shock or

fire hazard.The safeguards incorporated in

this unit will protect you if you observe the

following procedures for installation, use and

servicing.This unit is fully transistorized and

does not contain any parts that can be

repaired by the user.

DO NOT REMOVE THE CABINET COVER,

OR YOU MAY BE EXPOSED TO

DANGEROUS VOLTAGE. REFER

SERVICING TO QUALIFIED SERVICE

PERSONNEL ONLY.

1. Read Owner’s Manual

After unpacking this product, read the

owner’s manual carefully, and follow all

the operating and other instructions.

2. Power Sources

This product should be operated only

from the type of power source indicated

on the marking label. If you are not sure

of the type of power supply to your

home, consult your product dealer or

local power company.

For products intended to operate from

battery power, or other sources, refer to

the operating instructions.

3. Source of Light

Do not look into the lens while the lamp

is on. The strong light from the lamp may

cause damage to your eyes or sight.

4. Ventilation

Openings in the cabinet are provided for

ventilation and to ensure reliable

operation of the product and to protect it

from overheating, and these openings

must not be blocked or covered.The

openings should never be blocked by

placing the product on a bed, sofa, rug

or other similar surface.This product

should not be placed in a built-in

installation such as a bookcase or rack

unless proper ventilation is provided or

the manufacturer’s instructions have

been adhered to.

Continued

CONTENTS

Before use

5. Heat

The product should be situated away

from heat sources such as radiators,

heat registers, stoves, or other products

(including amplifiers) that produce heat.

IMPORTANT SAFETY INSTRUCTIONS (Continued)

6. Water and Moisture

Do not use this product near water – for

example, near a bath tub, wash bowl,

kitchen sink, or laundry tub; in a wet

basement; or near a swimming pool and

the like.

7. Cleaning

Unplug this product from the wall outlet

before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a

damp cloth for cleaning.

8. Power-Cord Protection

Power-supply cords should be routed so

that they are not likely to be walked on

or pinched by items placed upon or

against them, paying particular attention

to cords at plugs, convenience

receptacles, and the point where they

exit from the product.

9. Overloading

Do not overload wall outlets;extension

cords, or integral convenience

receptacles as this can result in a risk of

fire or electric shock.

10. Lightning

For added protection for this product

during storm, or when it is left

unattended and unused for long periods

of time, unplug it from the wall outlet.

This will prevent damage to the product

due to lightning and power-line surges.

Continued

CONTENTS

Before use

11. Object and Liquid Entry

Never push objects of any kind into this

product through openings as they may

touch dangerous voltage points or short-

out parts that could result in a fire or

electric shock. Never spill liquid of any

kind on the product.

IMPORTANT SAFETY INSTRUCTIONS (Continued)

12. Do not place the product vertically

Do not use the product in the upright

position to project the pictures at the

ceiling, or any other vertical positions.

It may fall down and dangerous.

13. Stack Inhibited

Do not stack other equipment on this

product or do not place this product on

the other equipment.

Top and bottom plates of this product

develops heat and may give some

undesirable damage to other unit.

14. Attachments

Do not use attachments not

recommended by the product

manufacturer as they may cause

hazards.

15. Accessories

Do not place this product on an unstable

cart, stand, tripod, bracket, or table.The

product may fall, causing serious injury to

a child or adult, and serious damage to

the product. Use only with a cart, stand,

tripod, bracket, or table recommended by

the manufacturer, or sold with the

product. Any mounting of the product

should follow the manufacturer’s

instructions, and should use a mounting

accessory recommended by the

manufacturer.

A product and cart combination should

be moved with care. Quick stops,

excessive force, and uneven surfaces

may cause the product and cart

combination to overturn.

S3125A

Continued

CONTENTS

Before use

16. If glass components, including lens

and lamp, should break, contact your

dealer for repair service.

This product incorporates glass

components, including a lens and a

lamp. If such parts should break, please

handle with care to avoid injury and

contact your dealer for repair service.

The broken pieces of glass may cause

to injury.

17. Coin-shaped Battery

a) Keep coin-shaped batteries out of

children’s reach. Be careful not to be

taken internally, especially by

children, as it may cause poisoning.

b) Do not load a battery into the remote

control the wrong side out.

c) Do not charge, heat, open, or short-

circuit the batteries. Do not throw the

batteries into a fire.

d) Do not leave a dead or exhausted

battery in the remote control.

e) If you do not use the remote control

for a long period of time, remove the

battery to avoid possible damage

from battery corrosion.

18. Keeping of Coin-shaped Batteries

After unpacking coin-shaped batteries,

keep them in poly bags, etc. separately

one by one when unused. If you leave

them unwrapped, they may be short-

circuited by metal objects, resulting in

battery leakage, heat or burst.These

may cause burns or injury.

The batteries must be completely

discharged when they are deposited in

collection containers for old batteries in

shops and at public collection sites. If a

charge remains, countermeasures

against short circuits have to be taken.

IMPORTANT SAFETY INSTRUCTIONS (Continued)

Continued

CONTENTS

Before use

19. Damage Requiring Service

Unplug this product from the wall outlet

and refer servicing to qualified service

personnel under the following conditions:

a) When the power-supply cord or plug

is damaged.

b) If liquid has been spilled, or objects

have fallen into the product.

c) If the product has been exposed to

rain or water.

d) If the product does not operate

normally by following the operating

instructions. Adjust only those

controls that are covered by the

operating instructions as an improper

adjustment of other controls may

result in damage and will often

require extensive work by a qualified

technician to restore the product to

its normal operation.

e) If the product has been dropped or

damaged in any way.

f) When the product exhibits a distinct

change in performance –this

indicates a need for service.

IMPORTANT SAFETY INSTRUCTIONS (Continued)

20. Servicing

Do not attempt to service this product

yourself as opening or removing covers

may expose you to dangerous voltage or

other hazards.Refer all servicing to

qualified service personnel.

21. Replacement Parts

When replacement parts are required,

be sure the service technician has used

replacement parts specified by the

manufacturer or have the same

characteristics as the original part.

Unauthorized substitutions may result in

fire, electric shock, or other hazards.

(Replacement of the lamp only should

be made by users.)

22. Safety Check

Upon completion of any service or

repairs to this product, ask the service

technician to perform safety checks to

determine that the product is in proper

operating condition.

CONTENTS

Before use

Power supply cord selection

If your line voltage is 220 to 240V, use one of

the following types of cable.

Plug

configuration Plug type

EURO

Line voltage

220 –240V

Use a 5A fuse which is approved by ASTA or

BSI to BSI362.

Always replace the fuse cover after changing

the fuse.

Altri manuali per TLP-B2E

Indice

Altri manuali Toshiba Proiettore

Toshiba

Toshiba TLP-MT1 Manuale utente

Toshiba

Toshiba TLP450E Manuale utente

Toshiba

Toshiba TLP-X3000 Manuale utente

Toshiba

Toshiba TDP-MT400 Manuale utente

Toshiba

Toshiba TLP790 Manuale utente

Toshiba

Toshiba TDP-EW25 Manuale utente

Toshiba

Toshiba TLP780E Manuale utente

Toshiba

Toshiba TDP-S80U Manuale utente

Toshiba

Toshiba TDP-P6 Manuale utente

Toshiba

Toshiba TDP-T95U Istruzioni per l'installazione

Toshiba

Toshiba TLP-S10 Manuale utente

Toshiba

Toshiba TXP450 Manuale utente

Toshiba

Toshiba TLP X2500 Manuale utente

Toshiba

Toshiba TLP-TW90 Manuale utente

Toshiba

Toshiba TDP-S81 Manuale utente

Toshiba

Toshiba TLP-MT7E Manuale utente

Toshiba

Toshiba TDP-T40 Manuale utente

Toshiba

Toshiba TLP-S200 Manuale utente

Toshiba

Toshiba TDP-TW95E Manuale utente

Toshiba

Toshiba TDP-D1-US Manuale utente

Toshiba

Toshiba TLP-T60MU Manuale utente

Toshiba

Toshiba TDP-ET20 Manuale utente

Toshiba

Toshiba TDP-P75 Manuale utente

Toshiba

Toshiba TLP-T500U Series Manuale utente

Manuali Proiettore popolari di altre marche

iEmmet

iEmmet MP-312 Manuale utente

Epson

Epson VS400 Manuale utente

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuale utente

Sony

Sony VPL-HW65ES Manuale di servizio

Philips

Philips LC1341 Guida di riferimento

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuale utente

NEC

NEC NP600S EDU Manuale utente

BenQ

BenQ SH753P Manuale utente

Eiki

Eiki EK-623U series Manuale utente

Epson

Epson PowerLite Pro Cinema 6020UB Manuale utente

Epson

Epson PowerLite Home Cinema 705HD Manuale utente

Christie

Christie LHD700 Manuale utente

Navitar

Navitar FX Manuale utente

InFocus

InFocus LitePro 560 Manuale utente

Sony

Sony SRX-R815P Manuale utente

Vivitar

Vivitar DP1500 X Manuale utente

Acer

Acer C20 Series Manuale utente

Asus

Asus ZenBeam Latte Manuale utente