TouchWand WallWand Istruzioni operative

This cocument belong to TouchWand Ltd. Last updated- March 22nd 2018

---1-----

Wallwand Switch

Programming

Guide

This cocument belong to TouchWand Ltd. Last updated- March 22nd 2018

---2-----

Programming Guide ....................................................................... Error! Bookmark not defined.

WallWand Switch ........................................................................................................................... 1

General ........................................................................................... Error! Bookmark not defined.

About us .............................................................................................. Error! Bookmark not defined.

Our Products ........................................................................................ Error! Bookmark not defined.

Service and support system ..................................................................... Error! Bookmark not defined.

Training ............................................................................................... Error! Bookmark not defined.

Phone support and on-site support ........................................................... Error! Bookmark not defined.

WallWand switch structure and requiredpreparations ................................. Error! Bookmark not defined.

Power switch connections .............................................................. Error! Bookmark not defined.

Connecting the backend unit

.......................................................... Error! Bookmark not defined.

Switch setting ................................................................................. Error! Bookmark not defined.

Pre-installation ..................................................................................... Error! Bookmark not defined.

Screen Build Process.............................................................................. Error! Bookmark not defined.

Build screen background ........................................................................ Error! Bookmark not defined.

Build your home screen ......................................................................... Error! Bookmark not defined.

Constructing icon types on internal screens ............................................. Error! Bookmark not defined.

Set icons on screens .......................................................................... Error! Bookmark not defined.

The location of the icons on the screens ............................................. Error! Bookmark not defined.

Text .................................................................................................... Error! Bookmark not defined.

Examples ............................................................................................................................... 12

Save the file ................................................................................... Error! Bookmark not defined.

config.jsn, it is important to keep this name exactly because the provider could not identify the data

file without this precision. ................................................................. Error! Bookmark not defined.

Tips for the expert user .................................................................. Error! Bookmark not defined.

Summary of screen setup steps ......................................................... Error! Bookmark not defined.

Unit setting in the controller ........................................................... Error! Bookmark not defined.

Programming of controller scenarios ............................................. Error! Bookmark not defined.

Troubleshooting ............................................................................. Error! Bookmark not defined.

This cocument belong to TouchWand Ltd. Last updated- March 22nd 2018

---3-----

General

About us

TOUCHWAND is based on members of I FEEL and develops and manufactures building control

and smart home systems.

The company develops and manufactures in Israel and is located in Petah Tikva.

The company's systems are based on a stable and robust platform with support for international

standards and a link to various third-party systems.

The Company's products are intended for various markets, mainly:

• Integrators dealing with smart home systems

• Integrators interested in office management systems and office buildings

• Integrators dealing with hotels

• Integrators working with construction developers.

The Company does not work with end customers and does not provide them with services and

equipment.

Our products

The company's products are based on the following products :

- The Wanderfull Hub, the controller, is used to manage wireless systems in the 916Mhz Z-

WAVE standard and supports BLE 4.2 or higher and Wi-Fi-based units, and also supports

the KNX standard for connecting to wired systems. You can see the product description on

the website or go through the technical details at the following link. You can see a video

showing the product at the following link -

https://www.youtube.com/watch?v=6uwGouDiRNM

- InWand Micromodule is used to control shutter, lighting or scenario in the Z-WAVE

standard.

- WallWand, intelligent electronic switch with LCD display, for control of blinds, lighting

and Z-WAVE scenarios.

In addition:

This cocument belong to TouchWand Ltd. Last updated- March 22nd 2018

---4-----

- The controller has a management system that allows control of the home and building

systems in a simple and user-friendly way with a technician, administrator and user

approach hierarchy. The management system is based on external cloud services (currently

AWS) and enables system survivability even during malfunctions.

- The client and integrator are equipped with cloud services that enable remote access,

backups, information and alerts.

This cocument belong to TouchWand Ltd. Last updated- March 22nd 2018

---5-----

Service and support system

The company's products are designed for installation by an electrician.

Warning - When installing the units, many data must be noted:

1. The power of the lighting fixtures and / or the shutters is not more than 5A

2. The voltage should be removed at the home or in the room where the installation will be carried

out, prior to installation

3. Make sure that the connected wires do not touch each other and there is no danger of shortening.

4 .If you install an InWand or WallWand unit, make sure there is room behind the switch before

you insert the unit. The Guise 3 is fitted up to 2 units in InWand and alternatively up to the

WallWand unit

Training

The company holds ongoing training. You can register via the website at the following link:

http://www.i-feel.co.il/contactus/ or contact us for further training whenever additional knowledge

is required.

Phone support and on-site support

Telephone support can be obtained from 09:00 to 17:00 by telephone at 03-5089553

Installation assistance is available for more than 15 units. The first installation is free of charge.

All subsequent installation costs 1200 NIS per day.

You can get programmable TOUCH switches at no charge for the first installation. Delivery time is

up to 5 working days.

All subsequent programming is 100 hours for the TOUCH switch.

Using ToolKit when installing over 10 units is mandatory. The rental of such a unit is 150 NIS per

day and its purpose is to provide an understanding tool for the stability of the network. Notify upon

reservation.

This cocument belong to TouchWand Ltd. Last updated- March 22nd 2018

---6-----

The WallWand switch structure and preparations

WallWand Zwave 5 "LCD is an innovative touch interface that enables control and management of

all home systems such as lighting, blinds, air conditioning, alarm and more.

The switch is based on ZWAVE wireless communication and enables adapting to a variety of

systems in varying locations, whether at home, in the office or in hotels, as it is adapted and

programmed according to the customer's personal preferences.

See link for downloading technical information on the circuit breaker

http://www.i-feel.co.il/wp-content/uploads/2017/06/TW-touch-PANEL.pdf

You can watch the YOUTUBE channel on the switch and install it

https://www.youtube.com/watch?v=qyompUMqcPU

Before going through the manual, make sure to use the latest updated document on the company's

website

This cocument belong to TouchWand Ltd. Last updated- March 22nd 2018

---7-----

Power switch connections

The voltage must be removed at the home or in the room where the

installation will be carried out, prior to installation

Connecting the backend unit

Concrete box recommended MicroSD card

Switch and Frame

Electrical connections to the back connections

Each switch or shutter button will

receive the number of the relay and

the following should be observed:

1. The TOUCH backend wiring will be

carried out from relay to 6 in

ascending order. It is best not to skip

relays and not to leave non-wired

relays when wired relays are

followed.

2 .If a second or third relay is

required, an icon should be loaded in

any case for the first unwired

transmitters and remove the "V" to

be invisible on the screen.

3 .When loading the icons of the

shutters, always load the shutter

button before the shutter download

button, and the wires must be

wired.

Setting the switch

Enter the app at the following link: http://cloud.touchwand.com/tp_json/index_s1.html#

This is the default app screen.

This cocument belong to TouchWand Ltd. Last updated- March 22nd 2018

---8-----

Enter credentials after initial registration of the controller:

The access details include the user name and password used when entering the controller

Pre-installation

Step 1 - When the controller is set up, proceed to the next step.

Step 2 - Install a file on the host file through the SD breaker or download from the website

www.touchwand.com a file of updated icons. Note that each icon library also includes a toggle

switch or momentary switch (scenario button)

Step 3 - Before you start programming, click the LOAD IMAGES button at the top of the screen and

mark all the images we downloaded in step 2 to the host computer. Once you have marked all the

images they are stored in the cloud and will be used later to continue programming the switch.

This cocument b

Screen Build Process

The screen can be built in two ways

1. Building the screen from

beginning

previously described.

Load the screen through an existing file to duplicate and update an existing screen

If you want to add icons-

All icons should be prepared in advance in the

Build screen background

You can select a background from the system library or use the background image which should be

Background.BMP at a bit density of up to 24 and a resolution of 800 pixels width by 480 pixels

Build your home screen

In the main screen you must load the names that begin with

Big_Light.BMP.

In order to load, you must first check the icon (you get a red square around the

icon) and then click on

upload icon

Three icons must be loaded on the main screen and after loading can mark or download the "V"

attached to the icon depending on the number of internal screens that you want to receive. If

the icons and background are not loaded into the home scre

moved to the next screen and an error message will be received

Constructing icon types on internal screens

When using a switch with a reversed image

into the Picture Library and renamed to the name that begins with

And turn on the name that begins with

See the following example:

long to TouchWand Ltd. Last updated- Mar

---9-----

Screen Build Process

The screen can be built in two ways

beginning

by loading the icons of the background and other images as

Load the screen through an existing file to duplicate and update an existing screen

All icons should be prepared in advance in the

format

Build screen background

You can select a background from the system library or use the background image which should be

Background.BMP at a bit density of up to 24 and a resolution of 800 pixels width by 480 pixels

Build your home screen

In the main screen you must load the names that begin with

BIGxxx.BMP

for example

In order to load, you must first check the icon (you get a red square around the

upload icon

,open the icon directory and double-

click on

Three icons must be loaded on the main screen and after loading can mark or download the "V"

attached to the icon depending on the number of internal screens that you want to receive. If

the icons and background are not loaded into the home scre

en, the following screens cannot be

moved to the next screen and an error message will be received

Constructing icon types on internal screens

When using a switch with a reversed image

–toggle switch

(Off / On) The two images must be loaded

into the Picture Library and renamed to the name that begins with

Main_XX.BMP

And turn on the name that begins with

Pressed_XX.BMP

h 22nd 2018

by loading the icons of the background and other images as

Load the screen through an existing file to duplicate and update an existing screen

format

XXX.BMP

You can select a background from the system library or use the background image which should be

Background.BMP at a bit density of up to 24 and a resolution of 800 pixels width by 480 pixels

for example

In order to load, you must first check the icon (you get a red square around the

click on

the icon.

Three icons must be loaded on the main screen and after loading can mark or download the "V"

attached to the icon depending on the number of internal screens that you want to receive. If

en, the following screens cannot be

(Off / On) The two images must be loaded

Main_XX.BMP

Off

This cocument belong to TouchWand Ltd. Last updated- March 22nd 2018

---10-----

Set icons on screens

When you load an image, it appears at the top right of the screen. You can place it by dragging

anywhere on the screen and to get a uniform and aesthetic look, make sure that the X and Y axis

are uniformly positioned.

After you load the icon and its location, you must choose one of the following four type options:

1. Light

2. Shutter

3. Scenario (long/short)

4. Scenario (switch)

Place the icons on the screens

When you load an image, it appears at the top right of the screen. You can place it by dragging

anywhere on the screen and to get a uniform and aesthetic look, make sure that the X and Y axis

are uniformly positioned.

Indice

Altri manuali TouchWand Interruttore

TouchWand

TouchWand Wanderfull Hub Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente