TP-Link CPE610 Manuale utente

CPE610

Outdoor CPE

Installation Guide

Contents

Overview

Package Contents

Hardware Overview

Hardware Connection

Site Consideration

Hardware Installation

Power Supply

Lightning & ESD Protection

Software Configuration

Logging in to the PharOS

Configuration for a Typical Application

Antenna Alignment

Specifications

FAQ

TP-Link's Pharos series outdoor CPEs are dedicated to outdoor

wireless network solutions. This guide is applicable to the product

CPE610.

Overview

Package Contents

Power Cord Passive PoE Adapter

Installation Guide

CPE610

Installation Guide

Outdoor CPE

Pharos CPE Center Reflector Panel Side Reflector Panels

(Qty.2)

Bolts with Nut and Lock

Washer Assemblies

(M6×110, Qty.2)

Bolts with Nut and Lock

Washer Assemblies

(M6×70)

Rear Cover Mounting Bracket

(For CPE)

Pole-mount Clamp

ST3×10 Self-tapping Screws

(Qty.2)

D3×28 Plastic Wall Anchors

(Qty.2)

Mounting Bracket

(For PoE Adapter)

Protective Cap

Bottom View

Hardware Overview

Reflector Assembly

Securing Arms

Bubble Level

Mounting Bracket

Pole-mount Clamp

Rear Cover

On: A device is connected to this port, but there

is no activity.

Flashing: A device is connected to this port, and

is active.

On: The CPE is powered on.

Panel Layout

On: The wireless function is enabled.

Passive PoE Adapter

Power LED

On: Power on.

Off: Power off.

Remote Reset

Press and hold for 5 seconds to reset the CPE

to its factory defaults.

RESET

Press and hold for 5 seconds to reset the CPE to

its factory defaults.

ETHERNET

The port is to connect to the POE port of the

provided PoE adapter for both data transmission

and power supply through Ethernet cabling.

Hardware Connection

Site Consideration

Ensure a clear line of sight between the wireless devices for

optimum performance. An elevated location is recommended as

obstacles like trees, buildings and large steel structures will

weaken the wireless signal. See 'Q2' in 'FAQ' for details about

how to calculate the minimum mounting height of the devices.

Mounting Height

Line of Sight

Side View

Orientation

Install the CPE devices so that they point towards the devices

that will receive the signal. You can orient the devices with the

help of Google Maps, GPS and some landmarks. The horizontal

bandwidth of CPE610 is 6.8°.

shenzhen

Line of Sight

Horizontal

Beamwidth

1. Attach the Side Reflector Panels to the Center Reflector Panel

as follows:

a. Insert the two mounting studs on the Center Reflector

Panel into the large opening of the slots on the Side

Reflector Panel.

b. Slide the Side Reflector Panel until the mounting studs are

positioned over the narrow opening of the slots, and the top

edges of the panels should be aligned when done.

Hardware Installation

c. Repeat step a and step b to attach the other Side Reflector

Panel.

d. (Optional) Attach the Side Reflector Panels to the Center

Reflector Panel more securely using four M2.5x8 bolts and

nuts (not provided). This is recommended if the CPE device

is exposed to extreme weather, such as strong winds.

2. Attach the Rear Cover to the reflector assembly as follows:

a. While holding the reflector assembly, align the raised edges

on the back with the Securing Arms of the Rear Cover, and

align the Snap Hooks on the Rear Cover with the slots on

the Center Reflector Panel.

b. Attach the Rear Cover to the reflector assembly. Press upon

the Rear Cover at the four positions marked in the diagram

below in sequence until it locks into place.

WARNING: To avoid damage, do not place the panels on a flat

surface or push down on it.

Altri manuali per CPE610

Indice

Altri manuali TP-Link Hardware di rete

TP-Link

TP-Link DECO X68 Manuale utente

TP-Link

TP-Link TL-PA8033P Manuale utente

TP-Link

TP-Link M7000 v2 Manuale utente

TP-Link

TP-Link VIGI NVR2016H-16MP Manuale utente

TP-Link

TP-Link TL-SM321A Manuale utente

TP-Link

TP-Link TL-POE170S Manuale utente

TP-Link

TP-Link VIGI Manuale utente

TP-Link

TP-Link VIGI NVR1016H Manuale utente

TP-Link

TP-Link TL-SM221A Manuale utente

TP-Link

TP-Link AC3200 Manuale utente

TP-Link

TP-Link M7350 Manuale utente

TP-Link

TP-Link TL-SM311LM Manuale utente

TP-Link

TP-Link GPON OLT P1200-08 Manuale utente

TP-Link

TP-Link VIGI NVR1104H-4P Manuale utente

TP-Link

TP-Link TL-WPA4226KIT Manuale utente

TP-Link

TP-Link Archer AX11000 Manuale utente

TP-Link

TP-Link BBA Mesh Manuale utente

TP-Link

TP-Link VIGI NVR1004H-4P Manuale utente

TP-Link

TP-Link TL-CPE710 Manuale utente

TP-Link

TP-Link VIGI NVR1008 V1 Manuale utente

TP-Link

TP-Link TL-WPA4220 TKIT Manuale utente

TP-Link

TP-Link TL-EP110 Manuale utente

TP-Link

TP-Link VIGI Manuale utente

TP-Link

TP-Link deco X60V2 Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente