TraceHabil LDT75C Manuale utente

Lecteur code à barres - Imprimante industrielle - Impression pose

Logiciel d’étiquetage - Développement spécifique - Etiquette - Film thermique

Manuel de programmation du lecteur

LDT75C ver 2.1

Introduction

Bar code technology enables efficient data collection in

various businesses including both commercial office and

industrial automation.Importantly bar code technology

also ensures the accuracy of captured data. The bar code

readers described in this manual have been developed for

maximum efficiency accuracy and ease of use in various

process scenarios.

FCCStatement

The federal communications commission FCC requires

that all CCD readers must be labeled with FCC

approval.

This equipment complies with the requirements in part 15

of FCC rules for a class A computing device. These limits

are designed to provide reasonable protection against

harmful interference when the equipment is operated in a

commercial environment.This equipment generates uses

and can radiate radio frequency energy and if not

installed and used in accordance with the instruction

manual may cause harmful interface to radio

communications. Operation of this equipment in a

residential area may cause unacceptable interference to

radio and TV reception requiring the operator to take

whatever is necessary to correct the interface.

TABLEOFCONTENTS Page

Introduction---------------------------------------------

Contents-------------------------------------------------

Chapter 1. Technical Data-----------------------------

Chapter 2. How to install your Bar Code Reader--

Chapter 3. Pin Assignment----------------------------

4~7

Chapter 4. Set up configuration----------------------

7~8

1.Set Default Configuration------------

2.Interface Options----------------------

3.System Type---------------------------

4.Keyboard Wedge Setting-------------

5.RS-232 Setting------------------------

6.WAND Emulation Setting-----------

7.Scanning Control----------------------

15~16

8.Turn On Various Bar Code Format---

17~18

9.Code Identifier------------------------

19~20

10.Code 39 Control-----------------------

11.Interleaved 2 of 5 Control------------

12.Industrial 2 of 5 Control--------------

13.Matrix 2 of 5 Control-----------------

14.Coda Bar/NW7 Control--------------

15.EAN-13 Control-----------------------

16.UPC-A Control------------------------

17.EAN-8 Control------------------------

18.UPC-E Control------------------------

19.UPC/EAN Conversion---------------

20.Code 11 Control-----------------------

21.MSI Code Control--------------------

22.Telepen Mode--------------------------

23.China Postal Code Control----------

24.End of Text Message-----------------

25.PC AT Keyboard Nationality--------

33~34

26.Set Prefix-------------------------------

27.Set Suffix-------------------------------

28.Data Format----------------------------

29.Other Control--------------------------

Appendix

Hexadecimal/Decimal Table--------

Appendix

Hex and Numeric table---------------

39~42

AT Function Key----------------------

43~44

Chapter1. Technical Data

This User’s Manual introduces the technical specification

of the bar code readers. The product features are

described in later chapter e.g. installation?set-up and

configuration as well as detailed technical specifications.

Main Technical FEATURES

Bar code width

75mm

Depth of reading

0 to 40mm

Working current

Scanning 84mA (with Decoder)

Stand-by 14mA

Light

Red LED array 660nm

Interface

TTL, RS232C, Keyboard Wedge,

WAND, Notebook, USB

Device Selection For

Keyboard Interface

PC AT/XT, PS/2 25, 30, 50, 60,

70, 80, Acer 7300, IBM 5550,

Mac, NEC9800

Bar code selections

Code39, Code32, CIP39

Coda Bar (CLSI)

EAN-13, UPC-A, EAN-8, UPC-E

(Add on 2 of 5)

MSI/Plessey (UK Plessey )

Code 128(EAN128)

Code 93

Code 11

Interleaved 2 of 5

Industrial 2 of 5

Matrix 2 of 5

China Postal Code

Telepen

Keyboard nationality

US, French, German, Spanish,

Italian, UK, Swiss, Belgium,

Netherlands, Sweden, Norway,

Denmark, Protugal, Finland,

Slovakia, Japan, Hungary,

Greece, Yugoslavia Cyrillic,

Yugoslavia

Chapter2. Howto install yourBarCode Reader

Installation:

Step 1.

Turn off the power on your terminal device.

Step 2.

Connect the bar code reader to the appropriate

outlet on the technical device depending on the

model / interface cable that you have, e.g.

RS232, PS2, ……….

Step 3.

Turn on the terminal device, you will hear the

initial welcome music.

Step 4.

The reader is now in stand-by mode.

Chapter3. Pin Assignment

This bar code reader is designed to be connected via

various cable connections, the pin assignments are listed

as below:

1.Keyboard Wedge:

A. 6 DIN and 5 DIN connector

M F M F

Phone

Jack

DIN-6M

DIN-6F

Function DIN-5M

DIN-5F

133GND 44

244VCC 55

3-- 5K/B CLK -- 1

4-- 1K/B DATA -- 2

51-- SYS DATA 2--

65-- SYS CLK 1--

7-- -- -- -- --

8-- -- -- -- --

9-- -- -- -- --

10 -- -- -- -- --

33GND shield 44

2. RS-232 : 9 PIN and 25 PIN female RS-232 connector

9P 25P

Phone Jack 9 Pin (F) 25 Pin (F)

Function

15.1 7.1 GND

2916.25 VCC

3-- -- K/B DATA

4-- -- K/B CLK

5-- -- SYS DATA

6-- -- SYS CLK

774CTS

823TXD

932RXD

10 85RTS

57GND Shield

3.WAND Emulation:9 PIN female and 5 DIN?6 DIN

male connector

9P M M

Phone

Jack

Remark Dsub

9P (F)

Dsub

9P (M)

DIN-5M

DIN-6M

1GND 7.8 133

2VCC 9511

8DATA 2722

GND Shield

7133

4. Apple MACINTOSH:4 PIN female and 4 DIN male

connector

M F

Phone Jack Function DIN-4M DIM-4F

1 GND 4 4

2 VCC 3 3

3 K/B DATA -- --

4 K/B CLK -- --

5 SYS DATA 1 1

6 SYS CLK -- --

7 -- -- --

8 -- -- --

9 -- -- --

10 -- -- --

GND Shield 4 4

5. NEC 9800:8 PIN female and 8 DIN male connector

M F

Phone Jack Function DIN-8M DIM-8F

1 GND 2 2

2 VCC 8 8

3 K/B DATA -- 4

4 K/B CLK -- 3

5 SYS DATA 4 --

6 SYS CLK 3 --

7 -- -- --

8 -- -- --

9 -- -- --

10 -- -- --

Reset 1 1

Retry 5 5

-- 6 6

-- 7 7

GND Shield 2 2

6. TTL (CMOS):9 PIN female and 5 DIN?6DIN male

connector

Phone Jack

Function Dsub 9P (F)

1GND 7

2VCC+5V 9

3DATA 1

4INDICATOR 2

5TRIGGER 3

6ENABLE 4

7SCAN 5

8-- --

9-- --

10 -- --

GND Shield

Chapter4. SetUp Configuration

1.Example:

In order to setup the program for the bar code

reader, you must be familiar with the setup

procedure. Three examples are given below.

Example 1:Setup Code 39 refer page 21

Start ?

Place command to CCD

Code 39 ON ?

Turning on Code39 decoding

FullASCII ?

Code39 Full ASCII mode selected

Verify Checksum

Code39 mode 43

END ?

Setting procedure completed

Example 2:

Start ?

Place command to CCD

Flash mode ?

Turning on Flash mode

Start ?

Place command to CCD

Flash On/Off ?

Turn on Flash on/off time setting

AppendixA"0",”6”

Setting Flash on 0.6 sec

AppendixA"0",”A”

Setting Flash off 1 sec

Example 3:

Start ?

Place command to CCD

Interleaved 2 of 5 On

Turning on Interleaved 2 of 5

Define length ?

Define interleaved 2 of 5

decode length

Appendix A "0","A"

Length with is equal to 10

Appendix A "0","C"

Length with is equal to 12

Appendix A "0","E"

Length with is equal to 14

All 3 length (10,12,14) are set

completely.

No need to scan “SET” again.

All Appendix A are no need to scan “END”

SET Only length 10 is set

SET Both length 10 & 12 are set

1. SET DEFAULT CONFIGURATION

Default

All programmed settings will be returned to the

manufacture default setting after the scanning process.

Other available option

Show configuration Show version

Abort setting

Start up code

If the scanner’s light is on, but it can not read. Try to

scan the “start up code”. The scanner may read again.

Indice

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente