Trane TCONTCCMHCM04A Manuale utente

SAFETY WARNING

Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of

heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and training.

Improperly installed, adjusted or altered equipment by an unqualified person could result in death or serious injury.

When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that are

attached to the equipment.

Confidential and proprietary Trane information

Installation and operation manual

Central Controller Unit

U-Match Inverter Systems

MultiSplit Inverter Systems

TCONTCCMHCM04A

April 2021

MS-SVX082A-EN

●This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction concerning use of the appliance by

a person responsible for their safety. Children should be supervised to ensure that

they do not play with the appliance.

●Use this equipment only for its intended purpose as described in this manual.

TCONTCCMHCM04A User Manual....................................................1

TCONTCCMHCM04A Wiring & Operating Instructions.....................................................2

Appearance.....................................................................................................................2

Specification....................................................................................................................3

Interface Features ..........................................................................................................3

Wiring Instructions..........................................................................................................4

Indoor Unit Dip Switch............................................................................................................6

TCONTCCMHCM04A Configuration File Replacement Instructions ...............................8

TCONTCCMHCM04A IP Modifying Instructions...............................................................11

Attached document..............................................................................................................14

1/ 14

TCONTCCMHCM04A Wiring & Operating Instructions

The core function of the protocol converter is to convert Modbus protocol

into BACnet protocol, implement Modbus device integration into BACnet

network. That is, the gateway acts as a Modbus Master (master station) and

supports connection of 4 Modbus Slaver devices. TCONTCCMHCM04A is a

standard BACnet network device in the BACnet network, and the user can

map the device data points in the MODBUS network one by one to the data

points in the BACnet network. The gateway provides the BACnet service

interface, and the third-party BACnet Client software integrates the Modbus

Slaver device into the system through the gateway.

Appearance

2/ 14

Specification

Function

Specification

Power supply AC and DC rated voltage 24V, working range 12V to 24V.

ROM

256M Flash

RAM

64M DDR2

Working

condition -20°C -- 70°C，5--90%RH (non-condensing)

Storage

Conditions

-40°C -- 85°C，5--95%RH (non-condensing)

Ethernet communication

Specification High-performance 100M/10M adaptive Industrial Network Card,

support AUTO

Protocol BACnet IP

RS-485 bus communication

Bus quantity

2 way RS485 bus communication

，Support 2 Modbus Slaver

per way

485

communication

parameters

9600 baud rate / 8 data bits /non parity /1 stop bit

Interface Features

Category Ports Function

Power supply V- +12/24V

V+ GND

3/ 14

Ethernet port Ethernet2 BACnet IP interface / Debug Interface

Modbus

interface 1

COM1

“A” of Modbus interface 1 (

Access gateway device

which address is 1,2

)

B “B” of Modbus interface 1(Access gateway device

which address is 1,2)

Modbus

interface 2

COM2

A “A” of Modbus interface 2(

Access gateway device

which address is 3,4

)

B “B” of Modbus interface 2(

Access gateway device

which address is 3,4)

RESET RESET Press the button 8 S continuously to

restart the

factory settings.

Wiring Instructions

TCONTCCMHCM04A default network portparameters are as follows：

IP address192.168.1.88

Subnet mask 255.255.255.0

Default gateway 192.168.1.1

TCONTCCMHCM04A should be used with gateway TCONTADPYCJA2A.

4/ 14

The specific connection diagram isas follows：

Connect to TCONTADPYCJA2A:

5/ 14

Indoor Unit Dip Switch

The address cannot be duplicated between the gateways connected to

the same TCONTCCMHCM04A. COM1 interface connect the gateway whose

address is 1&2; COM2 interface connect the gateway whose address is 3&4.

The indoor unit addresses under the same gateway cannot be duplicated,

and the address range is 1~32. The indoor units between different gateways

do not affect each other.

6/ 14

Indoor Unit Dip Switch

The address dip switch of the indoor unit is SW03, ON is 1, OFF is 0;

The address dip switch range is 1~32, dip switch setting as follows:

SW03

Address

…..

7/ 14

TCONTCCMHCM04A Configuration File Replacement

Instructions

1. The default IPof TCONTCCMHCM04A is 192.168.1.88 .

2. First, set the IP of the computer to the same network segment as

TCONTCCMHCM04A. Then “ping” the IP “192.168.1.88” to see if it can work;

if it works, then you can do the next setting.

3. If “192.168.1.88” cannot be pinged, press the RESET button for 8 seconds. After

HCM-04 restarts, ping 192.168.1.88. After pinging, you can start setting HCM-04.

4. File configuration

First double click to open “X2BACnet.exe” debugging software.

Click "File" on the menu bar to choose "Open… " or click on the toolbar to Open the

project.

8/ 14

In the dialog box, select the project file that you want to burn

Click "Gateway" on the menu bar to choose "Upload " or click on the toolbar to

upload the project.

In the pop up dialog box enter the gateway IP address, click the "Upload".

9/ 14

Indice

Altri manuali Trane Controllori

Trane

Trane BAYSTAT253A Istruzioni per il montaggio

Trane

Trane Tracer CH535 Manuale utente

Trane

Trane ReliaTel Manuale utente

Trane

Trane Tracer VV550 Manuale utente

Trane

Trane Tracer MP581 Manuale utente

Trane

Trane Tracer CH535 Manuale utente

Trane

Trane 700 Manuale per l'uso e la cura

Trane

Trane mP30 Manuale del proprietario

Trane

Trane 700 Manuale utente

Trane

Trane Tracer VV551 Manuale utente

Trane

Trane Tracer MP581 Manuale

Trane

Trane 700 Guida utente

Trane

Trane Tracer MP580 Istruzioni operative

Trane

Trane PIC Manuale del proprietario

Trane

Trane Mini Manuale utente

Trane

Trane Tracer UC600 Istruzioni per l'installazione e il funzionamento

Trane

Trane Tracer UC400 Manuale utente

Trane

Trane Tracer MP581 Manuale utente

Trane

Trane 700 Guida utente

Trane

Trane Tracer ZN511 Manuale utente

Trane

Trane Tracer SC Manuale utente

Trane

Trane Tracer ZN521 Manuale del proprietario

Trane

Trane SmartGen HSC940 Manuale utente

Trane

Trane VAV VV550 LonTalk Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente